Converting hollow fly ash into admixture carrier for concrete
Source abstract
Abstract
Abstract This study proposes a low-cost method to convert cenospheres into an admixture carrier for concrete manufacturing. Cenospheres are hollow fly ash particles generated in coal burning power plants, having an aluminosilicate shell with high strength and stiffness. The large inner volume of the cenospheres can be used to carry and release admixtures in concrete. However, directly using cenospheres as the carrier is not possible because the inner pore is not accessible to the admixture. To address this problem, chemical etching is employed to produce perforating holes through the shell. Liquid admixtures can be easily loaded into and later released from the produced perforated cenospheres (PCs). A series of characterization tests were carried out to understand the working mechanism of the chemical etching method and its effect on the properties of the PCs. It has been found that chemical etching dissolved a small amount of amorphous materials from the cenosphere shell. As a result, the cenoshpere shell was weakened, as indicated by the reduction of the bulk crushing strength of the PCs. Nevertheless, the bulk crushing strength of all produced PCs are sufficient to guarantee that they can survive the mixing and initial stress in fresh concrete. To experimentally confirm the feasibility of using the PCs as an admixture carrier for concrete, PCs were added into cement mortar as the internal water carrier, which successfully mitigated the autogeneous shrinkage in a low water-to-cement ratio concrete. Scanning electron microscopy analysis of the cement mortar confirms that PCs not only survived the mixing of concrete, but also were dispersed and bonded well to the cement mortar. This study suggests that PCs may provide a versatile tool to integrate various admixtures in concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC)10.1016/j.cemconcomp.2015.11.005 ↗
2. Effective mechanical properties of self-healing cement matrices with microcapsules10.1016/j.matdes.2016.01.124 ↗
3. Glass encapsulated minerals for self-healing in cement based composites10.1016/j.conbuildmat.2015.08.127 ↗
4. Effect of phase-change materials on properties of concrete
5. S. Manu, Evaluation of superplasticizer performance in concrete. Third International Conference on Sustainable Construction Materials and Technology, 2013. http://www.claisse.info/proceedings.htm.
6. B. Boh, S. B, Microencapsulation technology and its applications in building construction materials, RMZ-Mater. Geoenviron. 55 (2008) 329-344.
7. Development and application of microcapsule for cement hydration control10.1007/s12205-015-0281-8 ↗
8. Encapsulation techniques for organic phase change materials as thermal energy storage medium: a review10.1016/j.solmat.2015.06.039 ↗
9. Internal curing efficiency of prewetted lwfas on concrete humidity and autogenous shrinkage development10.1061/(ASCE)MT.1943-5533.0000883 ↗
10. Mixture proportioning for internal curing
11. Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures10.1016/j.cemconcomp.2011.07.006 ↗
12. Internal curing: a state-of-the-art review
13. Effect of cenospheres on the char formation and fire protective performance of water-based intumescent coatings on structural steel10.1016/j.porgcoat.2015.11.016 ↗
14. Characterization of ash cenospheres in fly ash from australian power stations10.1021/ef700340k ↗
15. Research on the compressive strength and its influence factors of the float-bead fly ash
16. K. Kovler, O.M. Jensen (Eds.), Internal curing of concrete–State-of-the-art report of RILEM Technical Committee 196-ICC, RILEM Report, 2007.
17. Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking10.1016/j.cemconres.2008.02.001 ↗
18. ASTM C1698,Standard Test Method for Autogenous Strain of Cement Paste and Mortar, ASTM International, West Conshohocken, PA, 2014, https://doi.org/10.1520/C1698-09R14.10.1520/C1698-09R14 ↗
19. Shen · 2008
20. A model for the bulk crushing strength of spherical catalysts10.1021/ie980360j ↗