Investigation of deterioration in corroding reinforced concrete beams using active and passive techniques
Source abstract
Abstract
Abstract Electro-chemical techniques that are routinely used in monitoring corrosion of reinforced concrete give an overall estimate of corrosion. Non-destructive techniques that are able to estimate the residual strength of corroding structures would help a great deal in strategizing post-corrosion maintenance. This paper explores two non-destructive techniques based on wave propagation for estimating residual strength of corroding reinforcement in concrete. The specimens undergoing corrosion were simultaneously monitored by acoustic emission (passive) and ultrasonic guided wave (active) techniques. The specimens were instrumented with AE sensors to record acoustic activities inside the specimens during corrosion. Simultaneously, the bars are also monitored by propagating ultrasonic waves through the bars. Active and passive monitoring results are correlated with already established electrochemical techniques to determine the relative efficacies of the NDT technologies. At the end of the exposure, the residual strength of the bars has been determined by tensile testing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Concrete: the advanced industrial material of the 21st century10.1007/BF02653859 ↗
2. Chloride-induced macrocell corrosion of steel in concrete—theoretical background and practical consequences10.1016/0950-0618(95)00018-6 ↗
3. A study of steel rebars embedded in concrete during 65 years10.1016/j.corsci.2004.01.006 ↗
4. Phenomenological modeling of reinforcement corrosion in marine environments
5. Chloride threshold level for corrosion of steel in concrete10.1016/j.corsci.2007.05.007 ↗
6. Steel corrosion and service life of reinforced concrete structures10.1080/15732470601155490 ↗
7. Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process10.1016/j.cemconres.2009.09.026 ↗
8. The corrosion pattern of reinforcement and its influence on serviceability of reinforced concrete members in chloride environment10.1016/j.cemconres.2009.07.025 ↗
9. Reinforcement corrosion in concrete structures, its monitoring and service life prediction––a review10.1016/S0958-9465(02)00086-0 ↗
10. Rasheeduzzafar. Effect of reinforcement corrosion on bond strength10.1016/0950-0618(95)00077-1 ↗
11. Deterioration of concrete due to reinforcement steel corrosion10.1016/0958-9465(95)00043-7 ↗
12. Non-destructive evaluation for corrosion monitoring in concrete: a review and capability of acoustic emission technique10.3390/s150819069 ↗
13. Methods for studying corrosion in reinforced concrete10.1680/macr.1994.46.167.81 ↗
14. Nondestructive techniques to investigate corrosion status in concrete structures10.1061/(ASCE)0887-3828(1999)13:3(96) ↗
15. Lamb waves for detecting delamination between steel bars and concrete10.1111/1467-8667.t01-1-00299 ↗
16. A comparison of steel/concrete and glass fiber reinforced polymers/concrete interface testing by guided waves
17. Longitudinal guided waves for monitoring corrosion in reinforced mortar10.1088/0957-0233/19/5/055702 ↗
18. Monitoring corrosion of rebar embedded in mortar using high-frequency guided ultrasonic waves
19. Longitudinal guided waves for monitoring chloride corrosion in reinforcing bars in concrete10.1177/1475921710365415 ↗
20. Monitoring corrosion in oxide and chloride environments using ultrasonic guided waves10.1061/(ASCE)MT.1943-5533.0000144 ↗
21. Nondestructive evaluation of corrosion in varying environments using guided waves10.1080/09349847.2012.699609 ↗
22. Ultrasonic guided waves for monitoring the setting process of concretes with varying workabilities10.1016/j.conbuildmat.2014.09.018 ↗
23. Monitoring freshly poured concrete using ultrasonic waves guided through reinforcing bars10.1016/j.cemconcomp.2014.09.011 ↗
24. Ultrasonic guided waves for monitoring corrosion of FRP wrapped concrete structures10.1016/j.conbuildmat.2015.08.084 ↗
25. Grosse · 2008
26. Assessing damage in corroded reinforced concrete using acoustic emission
27. Corrosion process in reinforced concrete identified by acoustic emission10.2320/matertrans.I-MRA2007844 ↗
28. Acoustic emission monitoring of reinforced concrete under accelerated corrosion10.1061/(ASCE)MT.1943-5533.0000647 ↗
29. Acoustic emission historic index and frequency spectrum of reinforced concrete under accelerated corrosion10.1061/(ASCE)MT.1943-5533.0000954 ↗
30. Phenomenological model of corrosion process in reinforced concrete identified by acoustic emission
31. Corrosion mechanisms in reinforced concrete by acoustic emission10.1016/j.conbuildmat.2013.02.020 ↗
32. Early corrosion detection in prestressed concrete girders using acoustic emission10.1061/(ASCE)MT.1943-5533.0000845 ↗
33. Damage assessment of corrosion in prestressed concrete by acoustic emission10.1016/j.conbuildmat.2012.11.071 ↗
34. Acoustic emission evaluation of corrosion damages in buried pipes of refinery
35. ASTM C876-91, Standard Test Method for Half-cell potentials of uncoated reinforcing steel in concrete 03(02) (1999) 446–451.