journal article·2018-02

Investigation of rheological properties of light colored synthetic asphalt binders containing different polymer modifiers

Ping Tang, Liantong Mo, Changluan Pan, Hao Fang, Barugahare Javilla, Martin Riara

Publisher page

Abstract

Abstract Light colored synthetic asphalt (LCSA) binders were prepared by using aromatic oil, petroleum resin and various polymer modifiers. The polymers used included styrene-butadiene-styrene block copolymers (SBS), ethylene-vinyl acetate copolymer (EVA) and polyethylene (PE). The modification effects of single and combined polymers were investigated. Fluorescence microscopy analysis confirmed the well dispersion of polymer phase and the compatibility of the binder. Fundamental research into rheological behaviors was conducted by using viscosity test, dynamic shear rheological test and bending beam test. Test results showed that LCSA had a high viscosity at construction temperatures and strong frequency/temperature dependence on rheological properties. Polymer modification was identified by the master curves of phase angle and rheological black diagrams. BBR results demonstrated that LCSA binders were susceptible to low temperature and aging. Data analysis indicated that LCSA binders prepared by using SBS, EVA and the combination of SBS plus EVA showed considerable performance for practical application.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Study on the binder for colored pavement
2. Laboratory evaluation of color polymer concrete pavement with synthetic resin binder for exclusive bus lanes
3. Analysis on construction technology of colored asphalt pavement
4. Color analysis and application study of color asphalt pavement
5. Setting method of thin-layer antiskid colored pavement in tunnel based on increasing luminance of pavement10.1061/9780784412442.313 ↗
6. Does colored pavement make non-signalized intersections safer? A case study in Japan10.1016/j.sbspro.2011.08.082 ↗
7. A novel technique for the production of cool colored concrete tile and asphalt shingle roofing products10.1016/j.solmat.2009.12.012 ↗
8. Experimental testing of cool colored thin layer asphalt and estimation of its potential to improve the urban microclimate10.1016/j.buildenv.2010.06.014 ↗
9. T. Kinouchi, T. Yoshinaka, N. Fukae, M. Kanda, Development of cool pavement with dark colored high albedo coating, in: Fifth Conference for the Urban Evironment, Vancouver, Cannda, 2004.
10. An experimental study on development of eco-friendly color concrete using industrial waste red mud10.5322/JES.2007.16.8.929 ↗
11. Preparation and pavement performance of colored asphalt10.4028/www.scientific.net/AMM.727-728.362 ↗
12. Chen · 2012
13. Xi · 2013
14. Study on the pavement performance of colored asphalt and its mixture
15. Polymer modified bitumen: optimization and selection10.1016/j.matdes.2014.05.009 ↗
16. Aging behavior of colored paving asphalt10.1081/LFT-200041176 ↗
17. Fading and color changes in colored asphalt quantified by the image analysis method10.1016/j.conbuildmat.2004.01.004 ↗
18. Development of color pavement in Korea10.1061/(ASCE)0733-947X(1985)111:3(292) ↗
19. Research application of colored asphalt mixture pavement10.4028/www.scientific.net/AMR.900.459 ↗
20. Huo · 2010
21. JTG E20-2011 · 2011
22. Investigation of asphalt binder containing various crumb rubbers and asphalts10.1016/j.conbuildmat.2012.11.063 ↗
23. Preparation, microstructure and rheological properties of asphalt sealants for bridge expansion joints10.1016/j.conbuildmat.2015.12.017 ↗
24. Physical and rheological properties of epoxidized natural rubber modified bitumens10.1016/j.conbuildmat.2014.04.026 ↗
25. Superpave Fundamantals Reference Manual, China Communications Press, 2005.
26. CJJ/T218-2014 · 2015
27. Influence of polymer melting point and melt flow index on the performance of ethylene-vinyl-acetate modified bitumen for reduced-temperature application10.1016/j.matdes.2016.02.003 ↗
28. Investigation on physical and high temperature rheology properties of asphalt binder adding waste oil and polymers10.1016/j.conbuildmat.2017.03.105 ↗
29. Optical microscopy visualization on droplet relaxation and breakup in a LDPE modified bitumen10.1016/j.matdes.2016.06.055 ↗
30. Thermo-rheological behavior and compatibility of modified asphalt with various styrene–butadiene structures in SBS copolymers10.1016/j.matdes.2015.09.002 ↗
31. The effect of long-term oxidation on the rheological properties of polymer modified asphalts10.1016/S0016-2361(03)00144-3 ↗
32. Investigation into material optimization and development for improved ravelling resistant porous asphalt concrete10.1016/j.matdes.2010.02.026 ↗
33. The effect of polymer modified binders on the long-term performance of bituminous mixtures: the influence of temperature10.1016/j.matdes.2015.04.018 ↗