journal article·2018-02

Evaluation of the polishing resistance characteristics of fine and coarse aggregate for asphalt pavement using Wehner/Schulze test

Dawei Wang, Pengfei Liu, Huining Xu, Jonas Kollmann, Markus Oeser

Publisher page

Abstract

Abstract Traffic safety is influenced strongly by the skid resistance of pavements. Moreover, the long-term skid resistance of pavements depends mainly on the polishing resistance of the specific aggregate present on the surface. The polishing resistance is a measure which describes the roughness of aggregate after a polishing load has been induced by traffic loads. Specifications for the polishing resistance of aggregate are given only for coarse aggregate. However, given the various mixture types it is questionable if the fraction of fine aggregate (up to 55 M.-%) ought to be neglected, particularly since the polishing resistance of fine aggregate is higher than that of coarse aggregate. This paper aims to quantify the polishing resistance of various aggregate size fractions with particular focus on the properties of fine aggregate, and to demonstrate the suitability of the Wehner/Schulze test (W/S) in this regard. The results show that the initial skid resistance and the polishing resistance of fine aggregate are generally greater than that of coarse aggregate. It is notable that the initial skid resistance decrease is far more pronounced for fine aggregate. The polishing resistance does not exhibit a uniform development across all aggregate sizes. It is to be expected that fine aggregate may play a significant role for the skid resistance of asphalt pavements; however only coarse aggregate is considered in the design process. Further research is needed to precisely determine the effect of fine aggregate to allow for more economically feasible pavement designs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Influence of aggregate particles on mastic and air-voids in asphalt concrete10.1016/j.conbuildmat.2015.05.031 ↗
2. Modelling and evaluation of aggregate morphology on asphalt compression behavior10.1016/j.conbuildmat.2016.12.041 ↗
3. Influence of aggregate shape on base behavior
4. Technical and computational aspects of the measurement of aggregate shape by digital image analysis10.1061/(ASCE)0887-3801(2004)18:1(10) ↗
5. Viscoplastic modeling of asphalt mixes with the effects of anisotropy, damage and aggregate characteristics10.1016/j.mechmat.2005.06.003 ↗
6. M. Zieger, Polishing test, Part III, Road Engineering Research No.385, Federal Ministry of Economical Affairs of Austria, Vienna (1980) (in German).
7. Developing a model for estimation of polished stone value (PSV) of road surface aggregates based on petrographic parameters
8. Experimental-based model for predicting the skid resistance of asphalt pavements10.1080/10298436.2011.643793 ↗
9. Improved prediction of aggregate skid resistance using modified PSV tests
10. Influence of different polishing conditions on the skid resistance development of asphalt surface10.1016/j.wear.2013.09.013 ↗
11. Forschungsgesellschaft für Straßen- und Verkehrswesen: Bestimmung der Griffigkeitsentwicklung von Oberflächen mit dem Prüfverfahren Wehner/Schulze, 2009
12. Effects of aggregate shape on the stability of bituminous mixes/with discussion
13. A study of the laboratory polishing behavior of granite as road surfacing aggregate
14. R. Roque, S.C. Huang, B.E. Ruth. Maximizing shear resistance of asphalt mixtures by proper selection of aggregate gradation, in: Eighth International Conference on Asphalt Pavements, vol. I, 1997.
15. Quantifying laboratory compaction effects on the internal structure of asphalt concrete10.3141/1681-21 ↗
16. Fractal and spectral analysis of aggregate surface profile in polishing process10.1016/j.wear.2011.05.024 ↗
17. The effect of aggregate type and size on the performance of thin surfacing materials
18. Prediction of UK surfacing skid resistance using Wehner Schulze and PSV
19. Evaluation of aggregate resistance to wear with Micro-Deval test in combination with aggregate imaging techniques10.1016/j.wear.2015.07.002 ↗
20. Dreidimensionale Charakterisierung der Kornform und Scharfkantigkeit von Gesteinskörnungen mittels Röntgen-Computertomographie
21. Study of micro-texture and skid resistance change of granite slabs during the polishing with the Aachen Polishing Machine10.1016/j.wear.2014.06.005 ↗
22. Development of morphological properties of road surfacing aggregates during the polishing process
23. Influence of coarse aggregate shape on the strength of asphalt concrete mixtures
24. Kirchmaier · 2011
25. Modeling and testing of road surface aggregate wearing behaviour10.1016/j.conbuildmat.2016.11.075 ↗
26. On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion10.1088/0953-8984/17/1/R01 ↗
27. Tire–road contact stiffness10.1007/s11249-014-0417-x ↗
28. A contribution to non-contact skid resistance measurement10.1080/10298436.2014.943216 ↗
29. Investigation on fatigue damage of asphalt mixture with different air-voids using microstructural analysis10.1016/j.conbuildmat.2016.08.138 ↗