Experimental study on scale effects in clay brick masonry prisms and wall panels investigating compression and shear related properties
Source abstract
Abstract
Abstract Scaled masonry model testing has been performed for many decades, with earlier researchers establishing that it is possible to model masonry behaviour at reduced scale, but that strength and stiffness are affected and with many studies suggesting that masonry is anisotropic. The effects of scale on clay brick masonry compressive strength, Young’s Modulus, shear modulus and diagonal tensile strength was investigated through material and component testing at two scales. Firstly, the effect of scaling the brick and mortar joints to half scale was assessed, and secondly, the effect of scaling the size of the specimen without scaling the brick and mortar size was assessed. Scale was found to have minimal to no effect in both test cases on the compressive strength characteristics of masonry and brick, and to have no effect on the stiffness of masonry in compression. The effects of scale were found to be significant for diagonal shear strength and shear modulus.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Hygrothermal properties of building materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. ASTM · 2008
2. ASTM · 2010
3. ASTM · 2011
4. ASTM · 2011
5. Identification of shear parameters of masonry panels through in-situ diagonal compression tests10.1080/15583050802138634 ↗
6. Testing masonry structures for seismic assessment10.1193/1.1585872 ↗
7. S. Chiostrini, L. Galano, et al., On the determination of strength of anicient masonry wall via experiemenatal tests, in: 12th World Conference on Earthquake Engineering. Auckland, New Zealand, 2000.
8. Experimental study on the determination of strength of masonry walls10.1016/S0950-0618(03)00007-2 ↗
9. F. Da Porto, E. Garbin, et al., Failure modes for in-plane loaded masonry walls made with thin layer mortar, in: 10th Canadian Masonry Symposium, Banff, Canada, 2005.
10. Assessment of mortar properties in vintage clay brick unreinforced masonry buildings10.1617/s11527-015-0604-8 ↗
11. R. Egermann, D. Cook, et al., An investigation into the behaviour of scale model brick walls, in: Proceedings of the 9th International Brick/Block Masonry Conference, Berlin, Germany, 1991.
12. A.W. Hendry, C.K. Murthy, Comparative tests on 1/3 and 1/6 scale model brickwork piers and walls, in: Proceedings of the British Ceramic Society. No. 4, 1965.
13. H.K. Hilsdorf, Investigation into the failure mechanism of brick masonry loaded in axial compresssion, in: Proceedings of the International Conference on Masonry Structural Systems: Designing, engineering and constructing with masonry products, University of Texas, Houston, Franklin B. Johnson ed; National Science Foundation (U.S) Clay Products Association of the Southwest, 1969.
14. T.G. Hughes, N. Kitching, Small scale testing of masonry, in: 12th International Brick/Block Masonry Conference. Madrid, Spain, 2000.
15. Diagonal shear behaviour of unreinforced maosnry wallettes strengthened using twisted steel bars10.1016/j.conbuildmat.2011.04.063 ↗
16. Analysis of unreinforced masonry concrete walls strengthened with glass fiber-reinforced polymer bars
17. Uniaxial compressive strength and stiffness of field-extracted and laboratory-constructed masonry prisms10.1061/(ASCE)MT.1943-5533.0000731 ↗
18. Diagonal compression testing of FRP retrofitted unreinforced clay brick masonry wallettes10.1061/(ASCE)CC.1943-5614.0000209 ↗
19. Mohammed · 2006
20. Prototype and model masonry behaviour under different loading conditions10.1617/s11527-010-9608-6 ↗
21. The effect of scale on the structural behaviour of masonry10.1016/j.conbuildmat.2010.06.025 ↗
22. Moss · 1971
23. Page · 1978
24. S. Prasan, A.W. Hendry, et al., Crushing tests on storey height walls 4.5in thick. 4, in: Proceedings of the British Ceramic Society, 1965.
25. H. Qiu, R. Chin, et al., Experimental shear testing of unreinforced masonry wall panels. NZSEE Conference, Christchurch, New Zealand, 2016.
26. Russell · 2010
27. H. Santa-Maria, G. Duarte, et al., Experimental investigation of masonry panels externally strengthened with CFRP laminates and fabric subjected to in-plane shear load, in: 13th World Conference on Earthquake Engineering, Vanvouver, B.C, Canada, 2004.
28. N.G. Shrive, E.L. Jessop, Anisotropy in extruded clay units and its effect on masonry behaviour, in: Proceedings of the 2nd Canadian Masonry Symposium, Ottawa, Canada, 1980.
29. Monte Carlo simulation of shear capacity of URM walls retrofitted by polyurea reinforced GFRP grids10.1061/(ASCE)1090-0268(2008)12:4(405) ↗
30. Suitability of half-scale burnt clay bricks for shake table tests on masonry walls10.1061/(ASCE)MT.1943-5533.0000861 ↗
31. Taunton · 1997
32. Flexural and shear strengthening of un-reinforced masonry with FRP bars10.1016/j.compscitech.2005.04.042 ↗
33. Vogt · 1956