Determination of tensile strength of concrete using a novel apparatus
Source abstract
Abstract
Abstract This study presents a new and novel technique for the determination of the tensile strength of concrete specimens. A prismatic concrete specimen with a hole at its centre is placed in a new device, called seesaw, and with the use of a conventional loading machine in compression mode, a tensile stress is applied to the specimen for the determination of the indirect tensile strength. In this study, two types of concrete mixes were used for preparation of specimens. The mixes were made of gravel, sand, cement, water, polypropylene fibre, and admixtures. Concrete specimens were subjected to tensile loading using a new load convertor device and a universal loading machine was used for the application of the load to the specimen. The load was applied at the rate of 0.02 MPa/s. The two dimensional finite element code FRANC2D/L was used for numerical modelling of the specimens and the loading conditions to determine the stress concentrations around the hole as a function of the hole diameter and the specimen width. Based on the results of experiments and numerical modelling efforts, a new formula for determination of the tensile strength of concrete is proposed in this study. Concurrent with indirect tensile tests using this new device, splitting test were performed to confirm the observed tensile strength values for concrete specimens. Both experimental and numerical modelling results show that the tensile failure occurs around the sides of the hole along the horizontal axis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete Properties and Behavior · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. High-performance concrete demystified
2. ASTM D2936-08, Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens. Annual Book of ASTM Standards, vol. 4, ASTM, West Conshohocken, PA.
3. ASTM D2938-86, Test Method for Unconfined Compressive Resistance of Intact Rock Core Specimens. ASTM Designation, 1986.
4. ASTM D3967-16, Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens, Annual Book of ASTM Standards, vol. 4, ASTM, West Conshohocken, PA.
5. Brady · 2006
6. BS1881 – 117 · 1983
7. BS1881 – 118 · 1983
8. Experimental investigation of tensile behavior of high strength concrete10.1590/S1516-14392002000300013 ↗
9. Double-punch test and tensile strength of concrete
10. The mutual effects between two unequal collinear cracks under compression10.1177/1081286515625436 ↗
11. Effect of construction joints on the splitting tensile strength of concrete
12. A new approach for measurement of tensile strength of concrete
13. Static and dynamic behavior of concrete and granite in tension with damage10.1016/S0167-8442(01)00054-4 ↗
14. The tensile strength of concrete: a review paper
15. Multi-modal monitoring of slip along frictional discontinuities10.1007/s00603-014-0588-7 ↗
16. Mechanical properties of high performance concrete
17. Direct tensile strength measurement of concrete
18. Experimental and numerical evaluation of direct tension test for cylindrical concrete specimens
19. Engineering properties of very high performance concrete
20. Experimental and numerical investigations on the shear behavior of a jointed rock mass10.1007/s12303-015-0052-z ↗
21. A new mini-grating absolute displacement measuring system for static and dynamic geomechanical model tests
22. Numerical study on crack propagation in brittle jointed rock mass influenced by fracture water pressure10.3390/ma8063364 ↗
23. Self-monitoring application of conductive asphalt concrete under indirect tensile deformation
24. tensile and shear strength of concrete and rock10.1016/0013-7944(90)90190-R ↗
25. Fracture energy and tension properties of high-strength concrete10.1061/(ASCE)0899-1561(1995)7:2(108) ↗
26. Maso · 1967
27. Uniaxial tension test for the determination of fracture parameters of concrete10.1016/S0013-7944(01)00087-X ↗
28. Backcalculation of residual tensile strength of regular and high performance fibre reinforced concrete from flexural tests10.1016/j.conbuildmat.2014.07.037 ↗
29. Review of the splitting-test standards from a fracture mechanics point of view10.1016/S0008-8846(00)00425-7 ↗
30. The design of high-strength lightweight concrete with density of less than 2000 kg/m10.1016/S0958-9465(01)00046-4 ↗
31. Coalescence of fractures under shear stress experiments10.1029/95JB00040 ↗
32. Tensile strength behaviour of recycled aggregate concrete10.1016/j.conbuildmat.2015.03.034 ↗
33. Direct tension test10.1016/S0008-8846(03)00231-X ↗
34. Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion10.1016/j.conbuildmat.2015.05.015 ↗
35. Split tensile strength on self-compacting concrete containing coal bottom ash10.1016/j.sbspro.2015.06.317 ↗
36. Study of rock dynamic fracture toughness by using VB-SCSC specimens under medium-low speed impacts10.1016/j.engfracmech.2017.06.024 ↗
37. Interactive finite element analysis of fracture processes: an integrated approach10.1016/0167-8442(87)90007-3 ↗
38. Determining tensile properties of mass concrete by direct tensile test
39. Experimental study on the instability mechanism of the major-defect fractured rock10.1007/s12517-017-3095-9 ↗
40. splitting tensile strength of high-performance concrete10.1016/S0008-8846(02)00768-8 ↗
41. Direct tension test of concrete
42. Zhou · 1988
43. The mixed boundary problems for a mixed mode crack in a finite plate10.1016/S0013-7944(96)00123-3 ↗
44. Experimental and numerical study on choosing proper pulse shapers for testing concrete specimens by split Hopkinson pressure bar apparatus10.1016/j.conbuildmat.2016.08.045 ↗
45. A review paper about experimental investigations on failure behaviour of non-persistent joint
46. Experimental and numerical investigation of the centre cracked horseshoe disc method for determining the mode I fracture toughness of rock-like material
47. Experimental and numerical study of shear crack propagation in concrete specimens
48. Shear behavior of non-persistent joint under high normal load10.1007/s11223-017-9872-6 ↗
49. The effect of compression load and rock bridge geometry on the shear mechanism of weak plane
50. Direct and indirect methods for determination of mode I fracture toughness using PFC2D