journal article·2018-04Open access

Improving the fluid transport properties of heat-cured concrete by internal curing

Shuai Nie, Wenqin Zhang, Shuguang Hu, Zhichao Liu, Fazhou Wang

Abstract

Heat curing accelerates cement hydration, leading to a coarse pore structure. This undermines the transport properties of concrete, which is essential in evaluating concrete durability. In this study, effect of saturated lightweight fine aggregate (LWFA) on the mechanical and transport properties and the microscopical characteristics of heat-cured mortar was investigated. Results show internal curing by LWFA promotes cement hydration and benefits the formation of denser hydration products and the interfacial transition zone (ITZ). This is evidenced by a reduced water absorption and chloride diffusion coefficient and an improved compressive strength at later ages. Moreover, the long-term performance of heat-cured mortar with internal curing is similar to and even better than that of the mortar cured at ambient temperature, which can be explained by the combination of the denser hydration products formed at heat curing period and the efficiency of internal curing at the subsequent curing period.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Heat curing and post-heat curing regimes of high-performance concrete: influence on microstructure and CSH composition10.1016/0008-8846(95)00202-2 ↗
2. Influence of heat curing on the pore structure and compressive strength of self-compacting concrete (SCC)10.1016/j.cemconres.2005.12.004 ↗
3. Effect of steam curing cycles on strength and durability of SCC: a case study in precast concrete10.1016/j.conbuildmat.2013.08.040 ↗
4. Effects of steam curing on strength and porous structure of concrete with low water/binder ratio10.1016/j.conbuildmat.2010.06.049 ↗
5. The effect of curing temperature on sulphate-resistant cement hydration and strength10.1016/j.conbuildmat.2007.04.014 ↗
6. Steam-cured concrete incorporating mineral admixtures10.1016/S0008-8846(02)01028-1 ↗
7. P.K. Mehta, B.C.G. Jr, Cracking-corrosion interaction in concrete exposed to marine environment, 4 (1982) 45–51.
8. Chloride resistance of high-performance concretes subjected to accelerated curing10.1016/j.cemconres.2004.03.024 ↗
9. Effects of curing conditions on properties of concrete using slag replacement10.1016/S0008-8846(00)00200-3 ↗
10. Influence of steam curing on the properties of concretes incorporating metakaolin and silica fume10.1617/s11527-009-9571-2 ↗
11. Influences of steam and autoclave curing on the strength and chloride permeability of high strength concrete10.1617/s11527-016-0913-6 ↗
12. Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete10.1016/S0008-8846(03)00112-1 ↗
13. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
14. Effect of temperature on the hydration of the main clinker phases in portland cements: part ii, blended cements10.1016/S0008-8846(98)00107-0 ↗
15. Effect of temperature on the hydration of the main clinker phases in portland cements: part i, neat cements10.1016/S0008-8846(98)00115-X ↗
16. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗
17. Internal curing : a 2010 state-of-the-art review
18. Protected paste volume in concrete: extension to internal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
19. Effect of internal curing on durability-related properties of high performance concrete10.1016/j.cemconres.2011.07.012 ↗
20. Fluid transport in high volume fly ash mixtures with and without internal curing10.1016/j.cemconcomp.2013.09.017 ↗
21. Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars10.1016/j.cemconcomp.2009.03.001 ↗
22. Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete10.1016/j.conbuildmat.2010.06.020 ↗
23. Water absorption in internally cured mortar made with water-filled lightweight aggregate10.1016/j.cemconres.2009.06.009 ↗
24. Internal curing of high-performance blended cement mortars
25. Development of microstructures in plain cement pastes hydrated at different temperatures10.1016/0008-8846(91)90044-I ↗
26. Water sorptivity of mortars and concretes: a review10.1680/macr.1989.41.147.51 ↗
27. Capillary transport in mortars and concrete10.1016/S0008-8846(97)00052-5 ↗
28. Backscattered electron imaging of cement pastes hydrated at different temperatures10.1016/0008-8846(90)90085-C ↗
29. Reaction kinetics of Portland cement mortars hydrated at different temperatures10.1016/0008-8846(92)90141-H ↗
30. The effect of heat treatment of inner product C-S-H10.1016/0008-8846(92)90051-V ↗
31. What causes differences of C-S-H gel grey levels in backscattered electron images?10.1016/S0008-8846(02)00808-6 ↗
32. The ITZ in concrete–a different view based on image analysis and SEM observations10.1016/S0958-9465(00)00065-2 ↗
33. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
34. Pozzolanic reaction of lightweight fine aggregate and its influence on the hydration of cement10.1016/j.conbuildmat.2017.07.111 ↗