Geopolymer synthetized from sludge residue pretreated by the wet alkalinizing method: Compressive strength and immobilization efficiency of heavy metal
Source abstract
Abstract
Abstract To realize the reclamation of the sludge residue, we used the sludge residue pretreated by the wet alkalinizing method to prepare geopolymer. Results showed that, when the dosage of the alkali activator, the silicate modulus of the alkali activator, and the doping amount of the pretreated sludge residue were 82.5%, 1.3 mol/mol, and 20% respectively, the compressive strength of geopolymer reached a maximum at 89.03 MPa. The preparation of geopolymer also realized a highly-efficient immobilization of the unstable-forms of copper and zinc (72.22% and 68.60%) in sludge residue, which significantly reduced the pollution risks of the leaching of heavy metals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. We should expect more out of our sewage sludge10.1021/acs.est.5b01931 ↗
2. Sewage sludge pyrolysis in fluidized bed: Influence of operational conditions on the product distribution10.1021/ie7017788 ↗
3. Land application of biosolids. Soil response to different stabilization degree of the treated organic matter10.1016/j.wasman.2003.08.006 ↗
4. Biochar: bring on the sewage10.1038/518483e ↗
5. Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials10.1016/j.cemconres.2007.04.003 ↗
6. The effectiveness of the incineration of sewage sludge on the evolution of physicochemical and mechanical properties of Portland cement10.1016/j.conbuildmat.2016.02.121 ↗
7. Geopolymer synthetized from bottom coal ash and calcined paper sludge10.1016/j.jclepro.2013.05.017 ↗
8. Leaching behavior of heavy metals from sewage sludge solidified by cement-based binders10.1016/j.chemosphere.2013.01.022 ↗
9. Factors affecting hazardous waste sodification stabilization: a review10.1016/j.jhazmat.2006.01.065 ↗
10. Novel sustainable geopolymer based syntactic foams: an eco-friendly alternative to polymer based syntactic foams10.1016/j.cej.2016.12.046 ↗
11. Use of reservoir sludge as a partial replacement of metakaolin in the production of geopolymer10.1016/j.cemconcomp.2011.03.002 ↗
12. Properties of wastepaper sludge in geopolymer mortars for masonry applications10.1016/j.jenvman.2012.07.008 ↗
13. The heavy metal adsorption characteristics on metakaolin-based geopolymer10.1016/j.clay.2011.11.027 ↗
14. Fly ash based geopolymer for heavy metal removal: a case study on copper removal10.1016/j.jece.2015.06.005 ↗
15. The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers10.1016/S1385-8947(02)00025-6 ↗
16. Development of metakaolin-fly ash based geopolymers for fire resistence applications10.1016/j.conbuildmat.2014.01.040 ↗
17. Synthesis and mechanical properties of metakaolinite-based geopolymer10.1016/j.colsurfa.2005.01.016 ↗
18. New porcelainized stoneware materials obtained by recycling of MSW incinerator fly ashes and granite sawing residues10.1016/S0272-8842(01)00025-6 ↗
19. Recycling the insoluble residue from titania slag dissolution10.1016/j.ceramint.2010.08.007 ↗
20. Synthesis of zeolitic materials from waste porcelain at low temperature via a two-step alkali conversion10.1016/j.ceramint.2006.05.020 ↗
21. Sequential chemical extraction procedure for the speciation of particulate trace metals10.1021/ac50043a017 ↗
22. Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers10.1016/j.conbuildmat.2012.04.102 ↗
23. Strength and microstructure of water treatment residue-based geopolymer containing heavy metals10.1016/j.conbuildmat.2013.08.047 ↗
24. Effect of Fly Ash/Alkaline activator ratio and sodium silicate/NaOH ratio on fly ash geopolymer coating strength
25. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
26. Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete10.1016/j.conbuildmat.2012.04.032 ↗
27. Speciation evolutions of heavy metals during the sewage sludge incineration in a laboratory scale incinerator10.1021/ef901060u ↗
28. An evaluation of lead leachability from stabilized/solidified soils under modified semi-dynamic leaching conditions10.1016/j.enggeo.2005.09.028 ↗
29. Reaction mechanism, kinetics and high temperature transformations of geopolymers10.1007/s10853-006-0568-8 ↗
30. Effects of hydroxyapatite addition on heavy metal volatility during tannery sludge incineration10.1007/s11356-013-1658-1 ↗
31. Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers10.1016/S0301-7516(02)00013-3 ↗