Eco-efficient low cement recycled concrete aggregate mixtures for structural applications
Source abstract
Abstract
Abstract Research has shown that good quality recycled concrete aggregates (RCA) can be produced for structural applications if the aggregate properties are properly considered in the mix design, especially the residual mortar content (RMC). Previous studies on RCA have generally used mixes with moderate to high cement contents, which negates many of the environmental and economic advantages of this material. In this study, the equivalent mortar volume (EMV) method was used to develop RCA mixes with the aim of minimizing new cement content by accounting for the RMC already present, thus improving binder efficiency. Conventional RCA mixes (i.e. 25 and 35 MPa compressive strengths) containing low cement content were developed without any chemical or mineral admixtures. A modified EMV method was proposed to overcome challenges encountered in the fresh state and an optimized 35 MPa mix was developed with a low binder intensity of 9.2 kg/m3·MPa−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovations in Concrete and Construction Materials · Municipal Solid Waste Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. New mixture proportioning method for concrete made with coarse recycled concrete aggregate10.1061/(ASCE)0899-1561(2009)21:10(601) ↗
2. Durability of recycled aggregate concrete designed with equivalent mortar volume method10.1016/j.cemconcomp.2009.02.012 ↗
3. LCA of recycled and conventional concretes designed using Equivalent Mortar Volume and classic methods10.1016/j.conbuildmat.2015.03.051 ↗
4. Flexural Performance of steel-reinforced recycled concrete beams
5. Shear strength of reinforced recycled concrete beams without stirrups10.1680/macr.2008.61.7.477 ↗
6. Eco-efficiency of the world cement industry: a data envelopment analysis10.1016/j.enpol.2011.02.057 ↗
7. Measuring the eco-efficiency of cement use10.1016/j.cemconcomp.2010.07.009 ↗
8. Quantification of the residual mortar content in recycled concrete aggregates by image analysis10.1016/j.matchar.2009.01.010 ↗
9. A three-step method for the recovery of aggregates from concrete10.1016/j.conbuildmat.2013.04.003 ↗
10. ASTM International, ASTM C127-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, West Conshohocken, PA, 2015.
11. ASTM International, ASTM Standard C33/C33-Me1, Standard Specification for Concrete Aggregates, West Conshohocken, PA, 2016.
12. Canadian Standards Association, CSA A23.1-14/A23.2-14, Concrete materials and methods of concrete construction – test methods and standard practices for concrete, Missasagua, Ontario, Canada, 2014.
13. Statistical descriptions of strength of concrete10.1061/JSDEAG.0005161 ↗
14. Mindess · 1981