journal article·2018-07

Optimization of heat cured fly ash/slag blend geopolymer mortars designed by “Combined Design” method: Part 1

Erion Luga, Cengiz Duran Atis

Publisher page

Abstract

Abstract In the current study, heat cured fly ash (FA)/ground granulated blast furnace slag (GGBFS) blend geopolymer mortars activated with sodium hydroxide (NaOH) were investigated. For this reason, ‘Combined Design’ method of Experimental Design has been introduced for the first time as an exceptional tool for the evaluation of the simultaneous effect of the parameters affecting different properties of the mortars. Empirical models were developed to predict the mortars flow workability, compressive strength and flexural strength as well as to find the optimum levels for the most relevant conditions. For this purpose, 40 design points with different FA/GGBFS ratios ranging from 0/450 g to 450/0g; water 180–225 g, NaOH 50–150 g and curing temperature 50–100 °C were generated. For each of the 40 design points, mortars flow workability, flexural and compressive strength were tested and investigated. In the end, Scanning Electron Microscopy (SEM) analysis of three optimal mortar samples, representative of 100% FA, ∼55/45 FA/GGBFS and 100% GGBFS was performed and analysed for the physical properties such as unit weight, water absorption and porosity. The generated models shows excellent correlation coefficients such as R2 = 0.95 for flow workability and R2 = 0.98 for compressive strength. The SEM analysis and physical test results comply with the model results, which show that “Combined Design” method is a very effective and timesaving method to reach very accurate results in the design of geopolymer mortars.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Mehta · 2005 · 453
2. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
3. Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration10.1016/j.conbuildmat.2015.08.089 ↗
4. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
5. B. Baradan, H. Yazıcı, S. Aydın, BETON, İzmir: Altındağ Grafik Matbaacılık, 2012.
6. Martı́nez-Ramı́rez S, Alonso S, Vazquez T. Alkali-activated fly ash/slag cements: strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
7. C. Heidrich, J.J. Feuerborn, A. Weir, Coal Combustion Products: A Global Perspective, in: World of Coal Ash Conference, Lexington, KY, 2013.
8. Alkali-activated fly ash: effect of thermal curing conditions on mechanical and microstructural development–part II10.1016/j.fuel.2006.07.010 ↗
9. Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete10.1016/j.matdes.2010.05.012 ↗
10. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products10.1016/j.jhazmat.2006.02.044 ↗
11. J. Davidovits, Chemistry of geopolymeric systems, terminology, in: Proceedings Second International Conference, Géopolymère ’99, J. Davidovits, R. Davidovits, C. James, C. (eds.), Saint-Quentin, France, 1999
12. Geopolymer: Man-made rocks geosynthesis and the resulting development of very early high strength cement
13. Advancing the use of secondary inputs in geopolymer binders for sustainable cementitious composites: a review10.3390/su3020410 ↗
14. Erdoğan · 1997
15. Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag10.1016/j.buildenv.2006.07.027 ↗
16. Workability and strength of lignite bottom ash geopolymer mortar10.1016/j.jhazmat.2009.01.120 ↗
17. J. Davidovits, M. Davidovics, Geopolymer: Room‐Temperature Ceramic Matrix for Composites, in: Proceedings of the 12th Annual Conference on Composites and Advanced Ceramic Materials, Part 1 of 2: Ceramic Engineering and Science Proceedings, Wiley & Sons, Inc, 2008, 9(7/8), pp. 835–41.10.1002/9780470310496.ch34 ↗
18. A. Palomo, M. Macias, M. Blanco, F. Puertas, Physical, chemical and mechanical characterization of geopolymers, in: Proceedings of the 9th International Congress on the Chem of Cem, 1992.
19. Alkali activation of Australian slag cements10.1016/S0008-8846(98)00170-7 ↗
20. Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar10.1016/j.conbuildmat.2007.10.011 ↗
21. Alkali activation of mortars containing different replacement levels of ground granulated blast furnace slag10.1016/j.conbuildmat.2011.10.018 ↗
22. Hardening mechanisms of an alkaline-activated class F fly ash10.1016/S0008-8846(01)00571-3 ↗
23. Strength and water penetrabillity of fly ash geopolymer concrete
24. Pervious high-calcium fly ash geopolymer concrete10.1016/j.conbuildmat.2011.12.028 ↗
25. Effect of Elevated Temperature Curing on Properties of Alkali-Activated Slag Concrete10.1016/S0008-8846(99)00143-X ↗
26. Early strength development and hydration of blast furnace slag/fly ash blends10.1680/adcr.1999.11.4.189 ↗
27. Activated fly ash/slag blended cement10.1016/j.resconrec.2007.04.002 ↗
28. X-ray microtomography shows pore structure and tortuosity in alkali-activated binders10.1016/j.cemconres.2012.03.004 ↗
29. Experimental design and optimization10.1016/S0169-7439(98)00065-3 ↗
30. Mechanical characteristics investigation of polymer concrete using mixture design of experiments and response surface method10.3923/jas.2008.2242.2249 ↗
31. Models relating mixture composition to the density and strength of foam concrete using response surface methodology10.1016/j.cemconcomp.2006.06.001 ↗
32. Investigating mix proportions of high strength self-compacting concrete by using Taguchi method10.1016/j.conbuildmat.2008.02.014 ↗
33. Properties of fly ash geopolymer concrete designed by Taguchi method10.1016/j.matdes.2011.10.036 ↗
34. Mixture design—design generation, PLS analysis, and model usage10.1016/S0169-7439(98)00126-9 ↗
35. ASTM C989 · 2014
36. EN 450-1 · 2012
37. ASTM C618-94a, Standard Specification for Coal and Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Portland Cement Concrete, Annual Book of ASTM Standards, V. 04.02, Concrete and Aggregates, Philadelphia, American Society for Testing and Materials, 1997.
38. Effect of coarse aggregate size and cement paste volume on concrete behaviour under high triaxial compression loading10.1016/j.conbuildmat.2011.04.026 ↗
39. The effect of coarse aggregate on fresh and hardened properties of self-compacting concrete (SCC)10.1016/j.proeng.2011.07.102 ↗
40. Effect of coarse aggregate size on the compressive behaviour of geopolymer concrete
41. Influence of aggregate content on the behaviour of fly ash based geopolymer concrete10.1016/j.scient.2012.07.006 ↗
42. Experimental investigation of the compressive and tensile strengths of geopolymer mortar: the effect of sand/fly ash (S/FA) ratio10.1016/j.conbuildmat.2016.10.030 ↗
43. TS EN 196-1 · 2009
44. Neville · 2003
45. Myers · 2009
46. Cornell · 2002
47. TS EN 1015-3, Kagir Harcı Deney Metodları-Bölüm 3: Taze Harç KıvamınınTayini (Yayılma Tablası ile), Ankara, Türk Standartları Enstitüsü, 2000.
48. TS EN 1015–11 · 2000
49. Development of a rubber-based product using a mixture experiment: a challenging case study10.1177/147776061302900301 ↗
50. Cornell · 1990
51. Box · 1987
52. Early age strength and workability of slag pastes activated by NaOH and Na2CO310.1016/S0008-8846(98)00025-8 ↗
53. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
54. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
55. An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products10.1016/j.conbuildmat.2014.12.065 ↗
56. Effect of concentration of sodium hydroxide and degree of heat curing on fly ash-based geopolymer mortar
57. Microscopic study of alkali-activated fly ash10.1016/S0008-8846(97)00271-8 ↗
58. Effect of sodium hydroxide on flow and strength of fly ash based geopolymer mortar
59. AS 3600, Standard Australia. Concrete structures, 2009.
60. ACI 318, American Concrete Institute. Building code requirements for structural concrete and commentary, 2008.
61. Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation10.1016/j.cemconres.2013.06.007 ↗
62. A review on alkaline activation: new analytical perspectives10.3989/mc.2014.00314 ↗
63. Improved compressive strength of alkali activated slag upon heating10.1016/j.matlet.2014.07.021 ↗