journal article·2018-07Open access

Ultra-high performance fibre-reinforced cementitious composite with steel microfibres functionalized with silane

Cézar Augusto Casagrande, Sergio Henrique Pialarissi Cavalaro, Wellington Longuini Repette

Abstract

Abstract This paper explores the effect of fibre functionalization with tetraethoxysilane (TEOS) in the microstructure and mechanical property of ultra-high performance cement composites with steel fibres. Fibres treated with three concentrations of TEOS were evaluated by pullout tests and SEM/EDS analysis. Mixes with treated fibres showed up to 35.6% increase in bond strength and up to 49.5% reduction in the crack opening at the peak pullout load in comparison with reference mixes containing untreated fibres. The Si/Ca ratios in the fibre-matrix transition zone increases with the increment of the concentration of TEOS in the treatment of the fibre. This indicates an increase of C-S-H at the interface that justifies the enhanced mechanical performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. H. Bache, Densified cement ultrafine particle-based materials, in: 2nd Int. Conf. Superplast. Concr., Otawa, 1981, p. 33.
2. Flexural strength and porosity of cements10.1038/289388a0 ↗
3. The path to Ultra-High Performance Fiber Reinforced Concrete (UHP-FRC): Five decades of progress
4. H. Russel, G.B.A. Graybeal, Ultra-High Performance Concrete: A State-of-the-Art Report for the Bridge Community – Publication No FHWA-HRT-13-060, McLean, 2013. https://www.fhwa.dot.gov/publications/research/infrastructure/structures/hpc/13060/.
5. Durability study of the first PC bridge constructed with ultra high strength fiber reinforced concrete in japan
6. Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites10.1016/j.compstruct.2013.07.033 ↗
7. A review on ultra high performance concrete: Part I. Raw materials and mixture design10.1016/j.conbuildmat.2015.10.088 ↗
8. The single-fibre pull-out test. 1: Review and interpretation10.1016/1359-835X(95)00069-E ↗
9. Pull-out work of steel fibers from cementitious composites: analytical investigation10.1016/0958-9465(91)90030-L ↗
10. Effect of silica fume on steel fiber bond characteristics in reactive powder concrete10.1016/j.cemconres.2003.12.023 ↗
11. Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing10.1617/s11527-011-9767-0 ↗
12. Effect of nano-silica on the hydration and microstructure development of ultra-high performance concrete (UHPC) with a low binder amount10.1016/j.conbuildmat.2014.04.063 ↗
13. Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution10.1016/j.conbuildmat.2011.07.003 ↗
14. Combined effect of coarse aggregate and fiber on tensile behavior of ultra-high performance concrete10.1016/j.conbuildmat.2016.05.039 ↗
15. Interface between zinc phosphate-deposited steel fibres and cement paste10.1007/BF01154093 ↗
16. Bond between reinforcing steel fibres and magnesium phosphate/calcium aluminate binders10.1016/S0958-9465(00)00006-8 ↗
17. The effect of fibre chemical treatment on the steel fibre/cementitious matrix interface10.1016/j.conbuildmat.2012.09.111 ↗
18. Monitoring of the mechanical behavior of concrete with chemically treated steel fibers by acoustic emission10.1016/j.conbuildmat.2012.06.066 ↗
19. Plueddemann · 1991
20. New Layered calcium organosilicate hybrids with covalently linked organic functionalities10.1021/cm034967o ↗
21. Organic calcium silicate hydrate hybrids: a new approach to cement based nanocomposites10.1039/b515947d ↗
22. New covalent bonded polymer? calcium silicate hydrate composites10.1039/B613077A ↗
23. The influence of silanes on hydration and strength development of cementitious systems10.1016/j.cemconres.2014.10.008 ↗
24. Improving the dispersion of steel fibers in cement mortar by the addition of silane10.1016/S0008-8846(00)00470-1 ↗
25. Exploring the potential of siloxane surface modified nano-SiO2 to improve the Portland cement pastes hydration properties10.1016/j.conbuildmat.2013.12.028 ↗
26. Characterization of silane-based hydrophobic admixtures in concrete using TOF-MS10.1016/j.cemconres.2015.01.008 ↗
27. A method for improving the early strength of pumice concrete blocks by using alkyl alkoxy silane (AAS)10.1016/j.conbuildmat.2011.07.026 ↗
28. A new class of organosilane-modified polycarboxylate superplasticizers with low sulfate sensitivity10.1016/j.cemconres.2011.09.006 ↗
29. Waste fibre–cement matrix bond characteristics improved by using silane-treated fibres10.1016/j.conbuildmat.2012.07.024 ↗
30. Mechanical properties of concrete-reinforced fibres and powders with crushed thermoset composites: The influence of fibre/matrix interaction10.1016/j.conbuildmat.2011.10.026 ↗
31. Silica modified synthetic fiber for improving interface property in FRCC
32. Seguimiento por espectroscopia infrarroja (FT-IR) de la copolimerización de TEOS (tetraetilortosilicato) y PDMS (polidimetilsiloxano) en presencia de tbt (tetrabutiltitanio)10.3989/cyv.2004.v43.i5.417 ↗
33. Corrosion Protection properties of organofunctional silanes—an overview10.1016/S1007-0214(05)70134-6 ↗
34. Electrochemical behavior of carbon steel pre-treated with an organo functional bis-silane filled with copper phthalocyanine10.1590/S0103-50532008000400019 ↗
35. Novel water-based nanosiloxane epoxy coating for corrosion protection of carbon steel10.1016/j.surfcoat.2011.05.036 ↗
36. Characterization of organofunctional silane films on zinc substrates10.1006/jcis.1996.4604 ↗
37. Optimum preparation of silanes for steel pre-treatment10.1016/S0143-7496(01)00004-5 ↗
38. Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses10.1016/j.cemconcomp.2014.09.024 ↗
39. Effects of the composing materials on the rheological and mechanical properties of ultra-high performance concrete (UHPC)
40. Comparative flexural behavior of hybrid ultra high performance fiber reinforced concrete with different macro fibers10.1016/j.conbuildmat.2011.04.051 ↗
41. AENOR, Asociación Española de Normalización y Certificación – UNE-EN 197-1 – Cemento – Parte1: Composición, especificaciones y criterios de conformidad de los cementos comunes, 2011. http://www.aenor.es/aenor/normas/normas/fichanorma.asp?tipo=N&codigo=N0048623#. VyEWb1bhDDd.
42. ASTM, C1437 – Standard Test Method for Flow of Hydraulic Cement Mortar, 2013.
43. AENOR, UNE-EN 196-1. Métodos de ensayo de cementos – Parte 1: Determinación de resistencias mecánicas, 2005, 35.
44. Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix10.1016/j.conbuildmat.2010.03.009 ↗
45. Bonding properties of amorphous micro-steel fibre-reinforced cementitious composites10.1016/j.compstruct.2013.02.015 ↗
46. Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC)10.1016/j.cemconcomp.2016.05.005 ↗
47. Fedération Internationale du Béton, International Federation for Structural Concrete (fib) Model Code 2010 – First complete draft – Volume 1 – Bulletin 55: march, Lausanne – Switzerland, 2010.
48. Effect of grain size on the mechanical properties and crack formation of HPFRCC containing deformed steel fibers10.1016/j.cemconres.2012.02.011 ↗
49. Effect of sand grain size and sand-to-cement ratio on the interfacial bond strength of steel fibers embedded in mortars10.1016/j.conbuildmat.2013.06.064 ↗
50. Effect of nano-SiO2 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete10.1016/j.cemconres.2017.02.031 ↗
51. Hydrolysis and condensation of silicates: effects on structure10.1016/0022-3093(88)90005-1 ↗
52. Sol-gel kinetics of tetraethylorthosilicate (TEOS) in acid catalyst10.1016/0022-3093(89)90178-6 ↗
53. Sol-gel process kinetics for Si(OEt)410.1016/0022-3093(89)90571-1 ↗
54. Early age hydration of cement pastes with different types of accelerators for sprayed concrete10.1016/j.conbuildmat.2016.02.101 ↗
55. The structure and stoichiometry of C-S-H10.1016/j.cemconres.2004.04.035 ↗
56. Materne · 2010 · 1