Elastic modulus damage model of cement mortar under salt freezing circumstance based on X-ray CT scanning
Source abstract
Abstract
Abstract In this paper, the properties of cement mortar with 0.5 W/C before and after freeze-thaw cycles in 4 wt% NaCl solution were measured. The experiments include mass loss, X-CT scanning and axial compression full curve. Results showed that cement mortar damage under freeze-thaw cycle was a layer-by-layer peeling process from exterior to interior. As the freeze-thaw cycles proceeded, the initial mass loss rate of mortar slowly increased and then the rate rapidly increased, and a mass loss prediction equation was proposed. Using X-ray CT scanning and 3D reconstruction technology, a method for the evaluation of the internal damage rule of cement mortar under freeze-thaw cycles was proposed. The porosity change of sample before and after freeze-thaw cycles was calculated by X-ray CT scanning technology. As the number of freeze-thaw cycles increased, the porosity increment of the samples increased approximately linearly. The peak compressive stress, initial elasticity modulus and residual strength of cement mortar caused by freeze-thaw cycles reduced gradually, and with the increase in cycling number, the downward trend became more obvious. Based on mass loss and the change of internal overall porosity of mortar, an elastic modulus damage model of cement mortar was established which is in good agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Durability of concrete in marine environment–a review
2. Mechanism of sea water attack on cement mortar
3. Towards sustainable concrete10.1038/nmat4930 ↗
4. The behaviour of cement composite under compression load at sulphate attack10.1016/0008-8846(94)90161-9 ↗
5. Effect of external loads on the frost-resistant properties of mortar with and without silica fume
6. Pozzolanic reaction of fly ash modified by fluidized bed reactor-vapor deposition10.1016/j.cemconres.2016.11.016 ↗
7. Chemical and mineralogical alterations of concrete subjected to chemical attacks in complex underground tunnel environments during 20–36 years10.1016/j.cemconcomp.2017.11.007 ↗
8. Stress corrosion initiated cracking of concrete10.1016/0008-8846(86)90091-8 ↗
9. Effect of Baltic seawater and binder type on frost durability of concrete10.1061/(ASCE)MT.1943-5533.0000803 ↗
10. Performance of 15 reinforced concrete mixtures in magnesiumsodium sulphate environments10.1016/0950-0618(95)00007-3 ↗
11. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate10.1016/S0958-9465(02)00083-5 ↗
12. Durability of self-consolidating concrete to different exposure regimes of sodium sulfate attack10.1617/s11527-008-9442-2 ↗
13. Durability of self-consolidating concrete to sulfate attack under combined cyclic environments and flexural loading10.1016/j.cemconres.2008.12.003 ↗
14. A working hypothesis for further studies of frost resistance of concrete
15. Theory of volume changes in hardened portland-cement paste during freezing
16. Freezing and thawing resistance of air-entrained concrete incorporating recycled coarse aggregate: the role of air content in demolished concrete10.1016/j.cemconres.2003.09.014 ↗
17. Durability of concrete containing fly ash and silica fume against combined freezing-thawing and sulfate attack10.1016/j.conbuildmat.2017.04.172 ↗
18. Mechanical properties and frost resistance of silica fume concrete10.1016/S0958-9465(97)00020-6 ↗
19. Freeze/thaw durability of concrete with recycled demolition aggregate compared to virgin aggregate concrete10.1016/j.jclepro.2010.09.014 ↗
20. Study of deterioration mechanism of concrete in multiaggressive and freeze-thaw environment
21. Durability of concrete subjected to the combined actions of flexural stress, freeze-thaw cycles and bittern solutions10.1007/s11595-007-6893-1 ↗
22. Freeze/thaw durability of concrete with synthetic fiber additions
23. Freeze-thaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method10.1016/j.cemconcomp.2013.01.009 ↗
24. Evaluation of environmental degradation of concrete in cold regions
25. Modeling the service life of concrete exposed to frost. International conference on ion and mass transport in cement-based materials
26. Surface and internal deterioration of concrete due to saline and non-saline freeze-thaw loads10.1016/j.cemconres.2005.10.007 ↗
27. Prediction of cyclic freeze-thaw damage in concrete structures based on response surface method10.1016/j.conbuildmat.2007.04.018 ↗
28. Service life prediction method of concrete subjected to freezing-thawing cycles and/or chemical attack I-damage development equation and degradation mode
29. Strength degradation model and durability service life prediction of concrete in freezing-thawing circumstance
30. Computational investigation of pore permeability and connectivity from transmission X-ray microscope images of a cement paste specimen
31. Micromechanics of randomly oriented ellipsoidal inclusion composites, Part II: Elastic moduli10.1063/1.362639 ↗
32. 1993
33. Some elastic properties of reinforced solids, with special reference to isotropic solids containing spherical inclusions10.1016/0020-7225(84)90033-8 ↗
34. Elastic moduli for a class of porous materials10.1007/BF01175799 ↗
35. Effective elastic moduli of two-phase composites containing randomly dispersed spherical inhomogeneities10.1007/BF01180222 ↗
36. Average stress in the matrix and effective moduli of randomly oriented composites10.1016/0266-3538(86)90067-9 ↗
37. Porosity-dependence of elastic moduli and hardness of 3Y-TZP ceramics10.1016/S0272-8842(98)00037-6 ↗