journal article·2019-02

Blast testing of high performance geopolymer composite walls reinforced with steel wire mesh and aluminium foam

Jian Liu, Chengqing Wu, Chunguang Li, Wenxue Dong, Yu Su, Jun Li, Ning Cui, Fan Zeng, Lan Dai, Qingfei Meng, Jiabao Pang

Publisher page

Abstract

Abstract Two blast tests were conducted to study the blast resistance of high performance geopolymer composite walls reinforced with steel wire mesh (SWM) and aluminium foam (AF). Conventional reinforced concrete (CRC) walls were also tested as control specimens. In total seven walls were tested under different blast loading conditions. The first blast test was conducted on one 2260 mm × 2260 mm × 150 mm SWM reinforced, one 2260 mm × 1000 mm × 150 mm SWM reinforced and one 2260 mm × 1000 mm × 150 mm combined SWM and AF reinforced high performance geopolymer composite walls under 50 kg TNT explosives at a standoff distance of 2.3 m. The second blast test was conducted on one 2260 mm × 2260 mm × 150 mm SWM reinforced and one 2260 mm × 2260 mm × 150 mm combined SWM and AF reinforced high performance geopolymer composite walls under 100 kg TNT explosives on the ground at the same standoff distance. Blast tests were also performed on two 2260 mm × 2260 mm × 150 mm CRC walls under such two designed explosions to compare their behaviours with reinforced high performance geopolymer composite walls. LVDT (linear variable differential transformer) devices were used to record the deflection histories and pressure sensors were used to measure the airblast pressure histories. The testing results indicated that the combined SWM and AF reinforced high performance geopolymer composite walls had a better blast resistance than the CRC walls, and the SWM reinforced high performance geopolymer composite wall was superior to both.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior · Engineering and Material Science Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Experimental and numerical study on steel wire mesh reinforced concrete slab under contact explosion10.1016/j.matdes.2016.11.098 ↗
2. Effect of steel fibers on static and blast response of high strength concrete10.1016/j.ijimpeng.2017.04.027 ↗
3. Experimental study on the effectiveness of fiber sheet reinforcement on the explosive-resistant performance of concrete plates10.1016/j.ijimpeng.2008.07.022 ↗
4. Fragmentation from spallation of RC slabs due to airblast loads10.1016/j.ijimpeng.2009.03.014 ↗
5. Experimental investigation of ultra-high performance concrete slabs under contact explosions10.1016/j.ijimpeng.2016.02.007 ↗
6. Alkali-activated slag cement based radioactive waste forms10.1016/0008-8846(91)90026-E ↗
7. Slurry infiltrated fiber concrete (SIFCON): properties and applications
8. Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)
9. Preparation of C200 green reactive powder concrete and its static–dynamic behaviors10.1016/j.cemconcomp.2008.06.008 ↗
10. Effects of steel fibres on dynamic strength of UHPC10.1016/j.conbuildmat.2016.04.007 ↗
11. Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements10.1016/j.cemconcomp.2017.02.010 ↗
12. Wu · 2018
13. Bond strength between blended slag and Class F fly ash geopolymer concrete with steel reinforcement10.1016/j.cemconres.2015.02.016 ↗
14. Compressive strength and microstructure of alkali-activated fly ash/slag binders at high temperature10.1016/j.cemconcomp.2017.09.011 ↗
15. Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers10.1016/j.cemconcomp.2016.11.014 ↗
16. Mechanical and thermal properties of lightweight geopolymer composites10.1016/j.cemconcomp.2017.11.016 ↗
17. Fire resistant melamine based organic-geopolymer hybrid composites10.1016/j.cemconcomp.2015.03.007 ↗
18. Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete10.1016/j.matdes.2014.06.059 ↗
19. Suitability of Sarawak and Gladstone fly ash to produce geopolymers: a physical, chemical, mechanical, mineralogical and microstructural analysis10.1016/j.ceramint.2016.03.046 ↗
20. Formulation and performance of flash metakaolin geopolymer concretes10.1016/j.conbuildmat.2016.05.061 ↗
21. Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash10.1016/j.conbuildmat.2016.08.097 ↗
22. Thermal performance modeling of geopolymer concrete10.1061/(ASCE)MT.1943-5533.0001291 ↗
23. Mix design and production of flyash based geopolymer concrete
24. Toward an indexing approach to evaluate fly ashes for geopolymer manufacture10.1016/j.cemconres.2016.04.007 ↗
25. Effect of ferrocement confinement on behavior of concrete10.1016/j.conbuildmat.2008.08.004 ↗
26. An approach to improve conventional square ferrocement jacket for strengthening application of short square RC column10.1617/s11527-015-0556-z ↗
27. Compressive behavior of CFFT with inner steel wire mesh10.1016/j.compstruct.2015.07.075 ↗
28. A study of concrete slabs with steel wire mesh reinforcement under close-in explosive loads10.1016/j.ijimpeng.2017.01.016 ↗
29. Comparative evaluation of steel wire mesh, steel fibre and high performance polyethylene fibre reinforced concrete slabs in blast tests
30. Experimental and numerical study of reactive powder concrete reinforced with steel wire mesh against projectile penetration10.1016/j.ijimpeng.2017.06.006 ↗
31. Basalt scale-reinforced aluminium foam under static and dynamic loads10.1016/j.compstruct.2018.07.070 ↗
32. Experiments and numerical analyses of HB400 and aluminum foam sandwich structure under landmine explosion10.1016/j.compstruct.2015.08.133 ↗
33. Protective effect of graded density aluminium foam on RC slab under blast loading – an experimental study10.1016/j.conbuildmat.2016.02.092 ↗
34. The blast and impact loading of aluminium foam10.1016/j.matdes.2012.08.016 ↗
35. Close-range blast loading of aluminium foam panels10.1016/S0734-743X(01)00155-5 ↗
36. Attenuation or enhancement – a one-dimensional analysis on shock transmission in the solid phase of a cellular material10.1016/S0734-743X(02)00016-7 ↗
37. Ufc, Structures to Resist the Effects of Accidental Explosions, Department of Defense.
38. Effect of strain rate on splitting tensile strength of geopolymer concrete10.1680/macr.13.00322 ↗
39. Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading10.1016/j.msea.2008.11.063 ↗
40. Impact characterization of basalt fiber reinforced geopolymeric concrete using a 100-mm-diameter split Hopkinson pressure bar
41. Dynamic splitting-tensile testing of highly fluidised geopolymer concrete10.1680/macr.12.00172 ↗
42. Research on the dynamic compressive test of highly fluidized geopolymer concrete10.1016/j.conbuildmat.2013.06.035 ↗
43. Engineering properties of inorganic polymer concretes (IPCs)10.1016/j.cemconres.2006.10.008 ↗
44. Effect of alkali-activator types on the dynamic compressive deformation behavior of geopolymer concrete10.1016/j.matlet.2014.03.102 ↗
45. Blast testing of ultra-high performance fibre and FRP-retrofitted concrete slabs10.1016/j.engstruct.2009.03.020 ↗