journal article·2019-02Open access

Corrosion behavior and flexural performance of reinforced concrete/ultrahigh toughness cementitious composite (RC/UHTCC) beams under sustained loading and shrinkage cracking

Lijun Hou, Bingxuan Zhou, Shang Guo, Farhad Aslani, Da Chen

Abstract

Abstract This paper presents an experimental study of the corrosion behavior of reinforced concrete/ultrahigh toughness cementitious composite (RC/UHTCC) beams under simultaneous loading and shrinkage cracking, and of the flexural performance of these beams after corrosion. During corrosion, a two-stage corrosion test was applied – wet/dry cycles of chloride solution first and then accelerated corrosion using impressed current. Corrosion potential in the first corrosion stage and corrosion electrical resistance and corrosion pattern in the accelerated corrosion stage were measured, and rebar corrosion appearance was observed after bending tests. The results indicated that the corrosion potential decreased rapidly after exposure to chloride solution while the corrosion electrical resistance increased with corrosion time. No corrosion-induced longitudinal cracks occurred at corrosion levels up to 16.32%, but severe pitting corrosion of reinforcement was observed at transverse cracks. The load-carrying capacity, deformation, ductility, and flexural crack pattern of corroded RC/UHTCC beams were degraded greatly due to pitting corrosion effect. Ductile concrete crushing failure mode was transformed to brittle rebar rupture failure mode. The sustained loading action further aggravated the degradation in flexural capacity of corroded RC/UHTCC beams.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Stress-strain relationship of corroded steel bars
2. Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion10.1016/S0008-8846(02)00783-4 ↗
3. Effects of confinements on the bond strength between concrete and corroded steel bars10.1016/j.conbuildmat.2016.05.040 ↗
4. Experimental investigation of corrosion effect on bond behavior between reinforcing bar and concrete10.1016/j.conbuildmat.2017.06.169 ↗
5. Probabilistic prediction with bayesian updating for strength degradation of RC bridge beams10.1016/j.strusafe.2013.07.006 ↗
6. Effect of bond and corrosion within partial length on shear behavior and load capacity of RC beam10.1016/j.conbuildmat.2010.11.081 ↗
7. Flexural strength of concrete beams with corroding reinforcement
8. Residual flexure capacity of corroded reinforced concrete beams10.1016/j.engstruct.2006.07.018 ↗
9. Residual strength of corrosion-damaged reinforced concrete beams
10. Shear and flexural strength prediction of corroded R.C. beams10.1016/j.conbuildmat.2017.05.125 ↗
11. Interaction between loading, corrosion and serviceability of reinforced concrete
12. Steel corrosion on RC structures under sustained service loads – a critical review10.1016/j.engstruct.2009.07.016 ↗
13. Behaviour of RC beams under sustained service loads10.1016/j.conbuildmat.2009.06.005 ↗
14. Structural performance of RC beams under simultaneous loading and reinforcement corrosion10.1016/j.conbuildmat.2012.08.010 ↗
15. The effect of fibres on steel bar corrosion and flexural behaviour of corroded RC beams10.1016/j.engstruct.2018.02.068 ↗
16. Review of potential structural applications of hybrid fiber engineered cementitious composites10.1016/j.conbuildmat.2012.04.010 ↗
17. Tensile and flexural properties of ultra high toughness cemontious composite10.1007/s11595-009-4677-5 ↗
18. Tensile strain–hardening behavior of PVA-ECC
19. van Zijl · 2011
20. Compressive fatigue damage and failure mechanism of fiber reinforced cementitious material with high ductility10.1016/j.cemconres.2016.09.019 ↗
21. Shear behaviors of reinforced ultrahigh toughness cementitious composite slender beams with stirrups10.1061/(ASCE)MT.1943-5533.0000833 ↗
22. A review on durability properties of strain hardening fibre reinforced cementitious composites (SHFRCC)10.1016/j.cemconcomp.2006.12.014 ↗
23. Water permeability of engineered cementitious composites10.1016/j.cemconcomp.2009.07.002 ↗
24. Transport properties of engineered cementitious composites under chloride exposure
25. Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ash10.1016/j.conbuildmat.2013.11.001 ↗
26. Autogenous healing of engineered cementitious composites under wet-dry cycles10.1016/j.cemconres.2009.01.013 ↗
27. Influence of microcrack self-healing behavior on the permeability of engineered cementitious composites10.1016/j.cemconcomp.2017.04.004 ↗
28. Self-healing of microcracks in engineered cementitious composites under sulfate and chloride environment10.1016/j.conbuildmat.2017.07.126 ↗
29. Corrosion protection performance of high performance fiber reinforced cement composites as a repair material10.1016/j.cemconcomp.2010.03.005 ↗
30. Corrosion resistance of reinforced concrete beams with cover replaced by UHTCC
31. Experimental study on bond behavior between UHTCC and corroded reinforcement using beam members
32. Corrosion durability of reinforcing steel in cracked high-performance fiber-reinforced cementitious composite beams10.1061/(ASCE)MT.1943-5533.0001191 ↗
33. Matrix design for waterproof Engineered Cementitious Composites (ECCs)10.1016/j.conbuildmat.2017.02.076 ↗
34. Drying behavior of ultra high toughness cementitious composite and its influence on anti-racking capacity
35. Code of China · 2011
36. Theoretical analysis on bending behavior of functionally graded composite beam crack-controlled by ultrahigh toughness cementitious composites10.1007/s11431-008-0337-9 ↗
37. ASTM · 2011
38. Half-cell potential measurements: potential mapping on reinforced concrete structures10.1007/BF02481526 ↗
39. ASTM · 2012
40. Observation and quantification of water penetration into strain hardening cement-based composites (SHCC) with multiple cracks by means of neutron radiography10.1016/j.nima.2010.04.119 ↗
41. Corrosion initiation in cracked fibre reinforced concrete: influence of crack width, fibre type and loading conditions10.1016/j.corsci.2015.05.021 ↗
42. Corrosion-induced cracking and bond behaviour of corroded reinforcement bars in SFRC10.1016/j.compositesb.2017.01.020 ↗
43. Permeability and self-healing of cracked concrete as a function of temperature and crack width10.1016/S0008-8846(02)01099-2 ↗