Influence of assumed absorption capacity of superabsorbent polymers on the microstructure and performance of cement mortars
Source abstract
Abstract
Abstract A correctly selected absorption capacity of SAP in cement paste is quite important for the microstructure and performance of internally cured cement-based materials. In present work, various water absorption capacity values were assumed to investigate the impacts of water exchange behavior of SAP on the performance and microstructure of cement mortars. The over-entrained water content due to the rapid desorption as well as the real effective water-to-cement ratio during the mixing was quantified and was proved to be the key factor for the notably decreased mechanical strength and anti-transport property (electrical resistivity), as well as the clearly increased fluidity and capillary porosity. However, no negative influence on the self-desiccation and shrinkage mitigation was observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Study on mechanism of desorption behavior of saturated superabsorbent polymers in concrete
2. Water-entrained cement-based materials: I. Principles and theoretical background10.1016/S0008-8846(01)00463-X ↗
3. Water-entrained cement-based materials: II. Experimental observations10.1016/S0008-8846(02)00737-8 ↗
4. Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio10.1007/s10973-013-3359-x ↗
5. Hydration kinetics of high-performance cementitious systems under different curing conditions10.1617/s11527-012-0001-5 ↗
6. Effect of internal curing with super absorbent polymers on the relative humidity of early-age concrete10.1016/j.conbuildmat.2015.08.042 ↗
7. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
8. The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials10.1016/j.cemconres.2015.03.020 ↗
9. Autogenous shrinkage of concrete with super-absorbent polymer
10. Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks10.1016/j.conbuildmat.2010.06.063 ↗
11. The use of superabsorbent polymers to reduce cracking of bonded mortar overlays10.1016/j.cemconcomp.2014.03.009 ↗
12. Void structure of concrete with superabsorbent polymers and its relation to frost resistance of concrete10.1617/s11527-013-0188-0 ↗
13. Effect of superabsorbent polymers (SAP) on the freeze–thaw resistance of concrete: results of a RILEM interlaboratory study10.1617/s11527-016-0868-7 ↗
14. Use of superabsorbent polymers in construction materials
15. Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography10.1016/j.cemconres.2012.05.005 ↗
16. Self-sealing of cracks in concrete using superabsorbent polymers10.1016/j.cemconres.2015.09.008 ↗
17. Mechtcherine · 2012
18. Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete10.1617/s11527-014-0351-2 ↗
19. Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete10.1016/j.conbuildmat.2016.03.010 ↗
20. Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.5010.1016/j.conbuildmat.2014.09.012 ↗
21. Mitigating early age shrinkage of ultra-high performance concrete by using super absorbent polymers (SAP)
22. Superabsorbent polymers—an additive to increase the freeze-thaw resistance of high strength concrete
23. The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments10.1016/j.cemconres.2015.06.013 ↗
24. Improving the performance of cement-based composites containing superabsorbent polymers by utilization of nano-SiO2 particles10.1016/j.matdes.2012.05.030 ↗
25. Interactions between superabsorbent polymers and cement-based composites incorporating colloidal silica nanoparticles10.1016/j.cemconcomp.2012.10.005 ↗
26. Influence of superabsorbent polymers on the surrounding cement paste10.1016/j.cemconres.2015.12.004 ↗
27. Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test10.1617/s11527-013-0078-5 ↗
28. Can superabsorent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?10.1016/j.conbuildmat.2011.12.062 ↗
29. Collagen-based highly porous hydrogel without any porogen: synthesis and characteristics10.1016/j.eurpolymj.2006.12.020 ↗
30. Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage10.1016/j.cemconres.2012.03.011 ↗
31. Sorption kinetics of superabsorbent polymers (SAPs) in fresh Portland cement-based pastes visualized and quantified by neutron radiography and correlated to the progress of cement hydration10.1016/j.cemconres.2015.05.001 ↗
32. Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars — development of yield stress and plastic viscosity over time10.1016/j.cemconres.2014.07.003 ↗
33. Prediction of standard compressive strength of cement by the electrical resistivity measurement10.1016/j.conbuildmat.2011.12.111 ↗
34. Impedance measurement to characterize the pore structure in Portland cement paste10.1016/j.conbuildmat.2013.10.064 ↗
35. Penetration resistance and electrical resistivity of cement paste with superplasticizer10.1617/s11527-013-0079-4 ↗
36. Preliminary interpretation of Portland cement hydration process using resistivity measurements
37. Wei · 2004
38. Pore structure evaluation of cementing composites blended with coal by-products: calcined coal gangue and coal fly ash10.1016/j.fuproc.2018.09.013 ↗
39. Utilization of lithium slag by wet-grinding process to improve the early strength of sulphoaluminate cement paste10.1016/j.jclepro.2018.09.027 ↗
40. Realistic pore structure of portland cement paste: experimental study and numerical simulation10.12989/cac.2013.11.4.317 ↗
41. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
42. Water consumption of the early-age paste and the determination of “time-zero” of self-desiccation shrinkage10.1016/j.cemconres.2007.08.005 ↗
43. Early-age water absorption and release behavior of superabsorbent polymers in cement-based materials
44. A dilatometer for measuring autogenous deformation in hardening Portland cement paste10.1007/BF02473076 ↗
45. Internal curing with lightweight aggregate produced from biomass-derived waste10.1016/j.cemconres.2014.01.025 ↗
46. Mechanical properties of cement mortars with superabsorbent polymers
47. D.P. Bentz, M. Geiker, O.M. Jensen, On the mitigation of early age cracking, in: B. Persson, G. Fagerlund (Eds.) Proceedings 3rd International Seminar on Self-desiccation and its Importance in Concrete Technology, Sweden, 2002, pp. 195–204.
48. Early age cement hydration behavior by resistivity method
49. The mechanical strength, degree of hydration, and electrical resistivity of cement pastes modified with superabsorbent polymers10.1016/j.conbuildmat.2015.12.082 ↗
50. The influence of superabsorbent polymers on the microstructure and permeability of cementitious materials
51. J. Yang, F. Wang, Y. Liu, Comparison of ordinary pores with internal cured pores produced by superabsorbent polymers, in: S.F. Wong, K.H. Tan, K.C.G. Ong (Eds.) 15th International Congress on Polymers in Concrete, Singapore, 2015, pp. 315–322.10.4028/www.scientific.net/AMR.1129.315 ↗
52. Preliminary results about 3d distribution of superabsorbent polymers in mortars
53. Experimental study on prevention of autogenous deformation by internal curing using super-absorbent polymer particles
54. Effect of water-to-cementitious materials ratio and silica fume on the autogenous shrinkage of concrete10.1016/S0008-8846(03)00149-2 ↗
55. Recommended method for measurement of absorbency of superabsorbent polymers in cement-based materials10.1617/s11527-014-0324-5 ↗
56. Effect of internal curing by superabsorbent polymers – internal relative humidity and autogenous shrinkage of alkali-activated slag mortars10.1016/j.conbuildmat.2016.07.007 ↗
57. Characterization of superabsorbent poly(sodium-acrylate acrylamide) hydrogels and influence of chemical structure on internally cured mortar10.1617/s11527-016-0823-7 ↗