journal article·2019-07

Optimization of mortars containing steel scale using Taguchi based grey relational analysis method

Erdinç Arıcı, Oğuzhan Keleştemur

Publisher page

Abstract

Abstract This paper examined the performance of cement mortars containing steel scale as experimentally and statistically. To this end, mortar samples with different levels of fine scale (0%, 5%, 10%, 15%), coarse scale (0%, 5%, 10%, 15%), water/cement ratio (0.5, 0.6) and cement dosage (400 kg/m3, 500 kg/m3) were produced and their compressive strength, flexural tensile strength and porosity value were determined. Taguchi based grey relational analysis method was performed to obtain optimal parameter levels for simultaneously achieving the desired properties of the mortars. L16 (42 × 22) orthogonal array table was chosen for the tests according to the Taguchi quality design concept. ANOVA (Analysis of variance) method was applied to determine statistically effects of the parameters. Optimization results were compared with initial parameters (control sample) and it was concluded that there was a good fit between them. Based on the overall observations, it is recommended that the Taguchi based grey relational analysis method could be effectively used in such studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Solid industrial wastes and their management in Asegra (Granada, Spain)10.1016/j.wasman.2005.02.023 ↗
2. Reuse of waste iron as a partial replacement of sand in concrete10.1016/j.wasman.2007.07.009 ↗
3. Investigation of gamma radiation shielding and compressive strength properties of concrete containing scale and granulated lead-zinc slag wastes10.1016/j.jclepro.2017.07.203 ↗
4. Towards zero waste
5. Comparison of mechanical properties of mortar containing industrial by product10.1016/j.apcbee.2014.01.056 ↗
6. Mechanical and durability performance of concrete incorporating fine recycled concrete and glass aggregates10.1617/s11527-014-0342-3 ↗
7. A comprehensive analytical study on the mechanical properties of concrete containing waste bottom ash as natural aggregate replacement10.1016/j.conbuildmat.2016.06.078 ↗
8. Recycling of scale and steel chips waste as a partial replacement of sand in concrete10.1016/j.conbuildmat.2011.08.047 ↗
9. The implementation of scale and steel chips waste as a replacement for raw sand in concrete manufacturing10.1016/j.jclepro.2016.07.211 ↗
10. Steel scale waste as component in mortars production: An experimental study
11. Characterization of mill scale for potential application in construction industry
12. Mechanical and micro-structural characteristics of steel mill scale as a partial replacement for fine aggregate in concrete
13. Effect of mill scale and fly ash waste on the performance of cement mortar10.15623/ijret.2015.0402048 ↗
14. Effect of sand replacement by mill scale on the properties of concrete
15. Effect of elevated temperature on the compressive strength of concrete produced with pulverized steel mill scale
16. Use of billet scale as partial replacement of sand in concrete
17. An experimental investigation on partial replacement of steel slag and steel millscale
18. Optimization of biodegradable foam composites from cassava starch, oil palm fiber, chitosan and palm oil using Taguchi method and grey relational analysis10.1007/s10924-016-0818-z ↗
19. Optimizing mix proportion of lightweight concrete containing plastic waste by Taguchi method10.4028/www.scientific.net/AMR.931-932.431 ↗
20. Optimization of durability properties of concrete containing fly ash using Taguchi’s approach and Anova analysis10.7764/RDLC.17.3.364 ↗
21. Long-term microstructure and mechanical properties of polymer-phosphazene concrete exposed to freeze-thaw10.1016/j.conbuildmat.2018.08.068 ↗
22. Long-term performance of the healed mortar with polymer containing phosphazene after exposed to sulfate attack10.1016/j.conbuildmat.2018.02.054 ↗
23. Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume10.1016/j.conbuildmat.2010.04.013 ↗
24. Effect of elevated temperature on the mechanical properties of concrete produced with finely ground pumice and silica fume10.1016/j.firesaf.2010.08.002 ↗
25. Effect of marble dust on the corrosion resistance of glass fiber reinforced mortars
26. Performance evaluation of cement mortars containing marble dust and glass fiber exposed to high temperature by using Taguchi method10.1016/j.conbuildmat.2014.02.061 ↗
27. Statistical analysis for freeze-thaw resistance of cement mortars containing marble dust and glass fiber10.1016/j.matdes.2014.04.013 ↗
28. Analysis of process parameters in surface grinding with graphite as lubricant based on the Taguchi method10.1016/S0924-0136(02)01112-3 ↗
29. Optimization of turning parameters for surface roughness and tool life based on the Taguchi method10.1007/s00170-007-1147-0 ↗
30. Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method10.1007/s00170-007-0981-4 ↗
31. Multi-response optimization in the development of oleo-hydrophobic cotton fabric using Taguchi based grey relational analysis10.1016/j.apsusc.2016.01.165 ↗