journal article·2019-07

The effect of different types of fiber on flexure strength and fracture toughness in SIFCON

Metin Ipek, Mecbure Aksu

Publisher page

Abstract

Abstract Slurry Infiltrated Fiber Concrete (SIFCON) is a special kind of steel fiber-reinforced cement composite which has extraordinary toughness values and surpassing mechanical characteristics like compressive, tensile, shear, and flexural strengths. In this study, steel and polypropylene fibers have been used by mixing in different combinations. 1/1, 1/3 and 2/3 of the beam molds have been filled with these fibers. In the study, the physical and mechanical properties and also the unit strength cost analyses of SIFCON have been examined. The use of the fibers with combinations has caused to an increase in the fiber volume. The highest flexural strength values have been reached with the beam samples completely filled with fiber respectively as 44.02 MPa and 41.23 MPa with the steel fiber at the length of 60 mm and 35 mm and with 60 mm steel and 50 mm polypropylene fiber combination. The combined use of polypropylene fiber and steel fiber has increased the flexural strength and fracture toughness. Consequently; it has been observed that the polypropylene fiber provides significant advantages for the use of SIFCON in terms of unit weight and cost due to the fact that its density and cost are lower when compared to those of the steel fiber.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M. A. Tasdemi̇r, F. Bayramov, A.N. Kocatürk, M. Yerlikaya, Betonun Performansa Göre Tasarımında Yeni Gelişmeler, Beton, Kongresi, İstanbul, sf. 1–34 2004.
2. The effect of pre-setting pressure applied flexural strength and fracture toughness of reactive powder concrete during the setting phase10.1016/j.conbuildmat.2011.06.045 ↗
3. M. L. Wang Constitutive properties of SIFCON. In: Proceeding, workshop on fibre reinforced cement and concrete, Sheffield, July 28–30; 1994. p. 237–255.
4. D. R. Lankard. Properties, applications: slurry infiltrated fiber concrete (SIFCON). Concrete international, December 1984. p. 287–306.10.1557/PROC-42-277 ↗
5. D. R. Lankard, Newell JK. Preparation of highly reinforced steel fiber reinforced concrete composites. In: Fiber reinforced concrete–international symposium, ACI SP-81, American Concrete Institute, Detroit, 1984. p. 287–306.
6. M.L. Wang, A.K. Maji. Shear properties of slurry infiltrated fiber concrete (SIFCON). London: High Performance Fiber Reinforced Cement Composites; 1992. p. 203–212.
7. V. Tabak Çelik Lifli Betonda Lif ve Lif Boy/Çap Oranlarının Değişiminin Betonun Mekanik Özelliklerine Etkisi, Dokuz Eylül Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, 2004. p. 73–76.
8. http://SIFCON.quinting.com
9. M. Wecharatana S. Lin. Tensile Properties of High Performance Fiber Reinforced Concrete. High Performance Fiber Reinforced Cement Composites 1992 London 248 258.
10. Preparation, properties and application of cement-based composites containing 5 to 20 percent steel fibre
11. Pull-out behavior of single steel fiber from SIFCON matrix10.1016/j.conbuildmat.2012.04.110 ↗
12. Response of SIFCON twoway slabs under impact loading10.1016/j.ijimpeng.2009.06.003 ↗
13. Residual load capacity of exposed and hardened concrete columns under explosion loads
14. The effect of pre-setting pressure on the flexural strength and fracture toughness of SIFCON during the setting phase10.1016/j.conbuildmat.2014.04.107 ↗
15. Neville · 1995
16. A high-silica-modulus cement for high performance concrete
17. The influence of microfillers on enhancement of concrete strength10.1016/0008-8846(93)90050-J ↗
18. I. Talebinejad, S. A. Bassam, A. Iranmanesh, M. Shekarchizadeh Optimizing mix proportions of normal weight reactive powder concrete with strengths of 200-350 MPa. Ultra high performance concrete (UHPC). In: International symposium on ultra high performance concrete, September 13–15; 2004. p. 133–41.
19. Ipek · 2004
20. A quantitative study on the surface crack pattern of concrete with high concent of steel fiber10.1016/S0008-8846(02)00788-3 ↗
21. The flexural strength and fracture toughness of reactive powder concrete in response to changing fibre size and pre-setting pressure10.1111/j.1460-2695.2011.01632.x ↗
22. TS 10513. Çelik teller-beton takviyesinde kullanılan. Turkish Standards Institute; 1992.
23. TS 10514. Beton-Çelik Tel Takviyeli-Çelik Telleri Betona Karıstırma ve Kontrol Kuralları, Turkish Standards Institute; 1992.
24. TS 10515. Çelik Tel Takviyeli Betonun Eğilme Mukavemeti Deney Metodu, Turkish Standards Institute; 1992.
25. ASTM C 1018. Standard test method for flexural toughness and first-crack strength of fiber-reinforced concrete (using beam with third-point loading), annual book of ASTM standards, V 4.02. American Society for Testing and Materials, Philadelphia, PA; 1989. p. 637–44.
26. JSCE standard SF-4, method of test for flexural strength and flexural toughness of fiber reinforced concrete. Japan Society of Civil Engineers (JSCE) Standard; 1984. p. 58–66.
27. 50-FMC, Committee of fracture mecanics of concrete determination of fracture energy of mortar and concrete by means of three-point bend tests on notched beams
28. Flexural performance of SIFCON composites subjected to high temperature10.1016/j.conbuildmat.2015.12.034 ↗
29. Mechanical properties of slurry infiltrated fiber concrete produced with waste steel fibers10.1016/j.conbuildmat.2018.08.042 ↗