Performance of lightweight hemp concrete with alkali-activated cenosphere binders exposed to elevated temperature
Source abstract
Abstract
Abstract This study investigates the performance of three different types of cenosphere as a lightweight supplementary cementitious material for alkali-activated binder for lightweight carbon-negative hemp-concrete for non-load bearing applications. Mechanical performance of hemp concrete exposed to three temperatures, room temperature (RT), 300 °C and 600 °C are studied using mechanical testing, thermogravimetric analysis (TGA) and Fourier-transform Infrared Spectroscopy (FTIR). Hemp concrete with cenosphere binder remained its integrity and showed a lower load carrying capacity even after exposure to elevated temperatures. Compressive strength capacity and elastic modulus of the samples reduced with the increase of temperature and shows the composite material is more suitable for non-load bearing application considering its mechanical behavior and fire requirements. The density, age, and type of cenosphere showed effects on mechanical properties at room temperature and elevated temperatures. The study shows that alkali activated cenosphere binders can potentially be a sustainable alternative to the lime binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Utilization of alternative materials in lightweight composites10.1016/j.jclepro.2012.01.031 ↗
2. M. Bell, The Potential of Hemp: A new approach to the material and its use within the construction industry, 2012.
3. Hygrothermal performance of hempcrete for Ontario (Canada) buildings10.1016/j.jclepro.2016.10.102 ↗
4. Introducing economic actors and their possibilities for action in LCA using sensitivity analysis: application to hemp-based insulation products for building applications10.1016/j.jclepro.2016.10.069 ↗
5. Design and performance evaluation of ultra-lightweight geopolymer concrete10.1016/j.matdes.2015.09.167 ↗
6. Thermal and structural properties of a hemp–lime biocomposite10.1016/j.conbuildmat.2013.07.096 ↗
7. Thermal conductivity of hemp concretes: variation with formulation, density and water content10.1016/j.conbuildmat.2014.05.039 ↗
8. A life-cycle energy and carbon analysis of hemp-lime bio-composite building materials10.1016/j.enbuild.2017.09.097 ↗
9. Hygrothermal performance of an experimental hemp–lime building10.1016/j.conbuildmat.2012.04.123 ↗
10. An energy and carbon footprint assessment upon the usage of hemp-lime concrete and recycled-PET façades for office facilities in France and Italy10.1016/j.jclepro.2016.10.111 ↗
11. R. Busbridge, R. Rhydwen, An investigation of the thermal properties of hemp and clay monolithic walls, 2010.
12. Life cycle assessment of natural building materials: the role of carbonation, mixture components and transport in the environmental impacts of hempcrete blocks10.1016/j.jclepro.2017.02.161 ↗
13. Physical properties and structure of composite made by using hemp hurds and different binding materials10.1016/j.proeng.2013.04.023 ↗
14. Variability of the mechanical properties of hemp concrete10.1016/j.mtcomm.2016.03.003 ↗
15. Mechanical properties and durability of hemp-lime concretes10.1016/j.conbuildmat.2014.02.065 ↗
16. Novel sustainable hemp-based composites for application in the building industry: physical, thermal and mechanical characterization10.1016/j.enbuild.2014.03.033 ↗
17. Lightweight composites containing hemp hurds10.1016/j.proeng.2013.09.013 ↗
18. Hammond · 2008
19. Embodied energy of common and alternative building materials and technologies10.1016/S0378-7788(01)00141-4 ↗
20. Life cycle greenhouse gas emissions of hemp–lime wall constructions in the UK10.1016/j.resconrec.2012.09.001 ↗
21. High temperature thermal barrier coatings from recycled fly ash cenospheres10.1016/j.applthermaleng.2012.05.004 ↗
22. Green lightweight cementitious composite incorporating aerogels and fly ash cenospheres – mechanical and thermal insulating properties10.1016/j.conbuildmat.2016.04.134 ↗
23. Catherine · 2014
24. Catherine · 2017
25. Impact of embodied energy on materials/buildings with partial replacement of ordinary Portland Cement (OPC) by natural Pozzolanic Volcanic Ash10.1016/j.jclepro.2017.12.234 ↗
26. Comparison of embodied energies of Ordinary Portland Cement with Bayer-derived geopolymer products10.1016/j.jclepro.2015.03.008 ↗
27. Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement10.1016/j.jclepro.2011.02.010 ↗
28. Fire resistance of a prefabricated bushfire bunker using aerated concrete panels10.1016/j.conbuildmat.2018.04.065 ↗
29. AS 1530.4 · 2005
30. Lubos · 2014
31. EN 13823 · 2010
32. Hemp lime bio-composite as a building material Irish construction
33. Stanwix · 2014
34. BS EN 1365-1 · 1999
35. Experimental study of parameters influencing mechanical properties of hemp concretes10.1016/j.conbuildmat.2011.07.052 ↗
36. Effect of hemp shive sizes on mechanical properties of lightweight fibrous composites10.1016/j.proeng.2012.07.441 ↗
37. AS 1141.6 · 2000
38. AS 1012.3.5 · 2015
39. AS 3582.2 · 2001
40. AS/NZS 3582.3 · 2002
41. Mechanical properties of hemp fibre reinforced cement: influence of the fibre/matrix interaction10.1016/j.jeurceramsoc.2007.05.019 ↗
42. Effects of high temperature on the properties of high performance concrete (HPC)10.1016/j.proeng.2017.02.108 ↗
43. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
44. Stability of cenospheres in lightweight cement composites in terms of alkali–silica reaction10.1016/j.cemconres.2012.02.010 ↗
45. The influence of fly ash cenospheres on the details of cracking in flyash-bearing cement pastes10.1016/0008-8846(84)90001-2 ↗
46. An investigation on strength development of cement with cenosphere and silica fume as pozzolanic replacement10.1155/2016/9367619 ↗
47. Studying the hardening and mechanical performances of rice husk and hemp-based building materials cured under natural and accelerated carbonation10.1016/j.conbuildmat.2015.06.032 ↗
48. Characteristics of low-density hemp-lime building materials10.1680/coma.1000021 ↗
49. Influence of compactness and hemp hurd characteristics on the mechanical properties of lime and hemp concrete10.1080/19648189.2009.9693171 ↗
50. ASTM C 1018 · 1998
51. Hempcrete Installation Facts Sheet, Hempcrete Aust. Pty Ltd. (2014). http://www.hempcrete.com.au/index.php?option=com_content&view=article&id=2&Itemid=3 (accessed March 14, 2017).
52. Experimental study on the physical–mechanical durability of innovative hemp-based composites for the building industry10.1016/j.enbuild.2015.07.022 ↗
53. The relation between structure and vibrational spectra of natural zeolites10.1016/S0022-2860(01)00741-4 ↗
54. C.A. Rees, Mechanisms and kinetics of gel formation in geopolymers, PhD Thesis, 2007.
55. The mechanism of geopolymer gel formation investigated through seeded nucleation10.1016/j.colsurfa.2007.12.019 ↗
56. Use of infrared spectroscopy to study geopolymerization of heterogeneous amorphous aluminosilicates10.1021/la026127e ↗
57. Attenuated total reflectance Fourier transform infrared analysis of fly ash geopolymer gel aging10.1021/la700713g ↗
58. Compatibility studies between NASH and CASH gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
59. Compressive strength and microstructural characteristics of class C fly ash geopolymer10.1016/j.cemconcomp.2009.11.003 ↗
60. Synthesis and thermal properties of inorganic polymers (geopolymers) for structural and refractory applications from volcanic ash10.1016/j.ceramint.2011.05.002 ↗
61. Influence of binder composition on the gel structure in alkali activated fly ash/slag pastes exposed to elevated temperatures10.1016/j.ceramint.2016.11.042 ↗
62. Effect of hemp fibers on fire resistance of concrete10.1016/j.conbuildmat.2018.07.014 ↗