journal article·2019-12

Rheological and aging behaviors of liquid rubber modified asphalt binders

Ming Wang, Rui Li, Yong Wen, Jianzhong Pei, Xiangyang Xing, Zixuan Chen

Publisher page

Abstract

Abstract To provide a quality option for road materials in cold regions and reduce the energy consumption of modified asphalt in road engineering, liquid styrene butadiene rubber (LSBR) was selected to modify asphalt. In this study, under the condition of 60 °C, base asphalt (SK-90#) was modified by LSBR and the rations of LSBR were 1 wt%, 3 wt%, 5 wt% and 7 wt% of base asphalt. Dynamic shear rheometer (DSR) and bending beam rheometer (BBR) were used to investigate the rheological properties (fatigue performance and low temperature cracking resistance performance) and anti-aging performance of asphalt binders. The results showed that LSBR had a negative effect on the high temperature performance of asphalt binder, but it had the best improving effect on ductility in conventional properties. After aging procedure, the deformation resistance ability of the modified asphalt binder was greater than the recovery deformation ability. LSBR effectively improved the low temperature cracking resistance and obviously improved the fatigue performance of asphalt binders. The modified asphalt binders had good anti-aging ability when the test temperature was under 5 °C and the LSBR content was no more than 3 wt% of base asphalt. Considering the comprehensive properties of LSBR modified asphalt binders, the mixing content of LSBR should be no more than 3 wt%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
2. Polymer modification of paving asphalt binders10.5254/1.3538685 ↗
3. The engineering, economic, and environmental performance of terminal blend rubberized asphalt binders with wax-based warm mix additives10.1016/j.jclepro.2018.03.011 ↗
4. Effect and mechanism of calcium carbonate whisker on asphalt binder10.1088/2053-1591/aafa2c ↗
5. Preparation of a novel flow improver and its viscosity-reducing effect on bitumen10.1016/j.fuel.2016.05.028 ↗
6. Evaluation of nano-ZnO dispersed state in bitumen with digital imaging processing techniques10.1520/JTE20160401 ↗
7. The use of natural rubber latex as a renewable and sustainable modifier of asphalt binder10.1080/10298436.2015.1095913 ↗
8. Controlling Performance of Crumb Rubber-Modified Binders Through Addition of Polymer Modifiers10.1177/0361198106196200108 ↗
9. Effects of polymer additives on bituminous mixtures10.1016/j.conbuildmat.2014.04.108 ↗
10. Investigating the effects of SBR on the properties of gilsonite modified asphalt10.1016/j.conbuildmat.2018.09.190 ↗
11. J. Cai, Y. Wang, D. Wang, R. Li, J. Zhang, J. Pei, Investigation on high-temperature performance of waste-based high-viscosity asphalt binders (WHABs) by Repeated Creep Recovery (RCR) test, Canadian Journal of Civil Engineering (ja).
12. Comparisons of synchronous measurement methods on various moduli of asphalt mixtures10.1016/j.conbuildmat.2017.09.193 ↗
13. Modeling viscosity behavior of crumb rubber modified binders10.1016/j.conbuildmat.2009.04.005 ↗
14. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber10.1016/j.conbuildmat.2011.06.061 ↗
15. Low temperature fracture of polyethylene-modified asphalt binders and asphalt concrete mixes (with discussion)
16. Low temperature performance of SBS-modified asphalt mixes
17. Temperature induced stresses and deformations in asphalt concrete
18. Evolution and locational variation of asphalt binder aging in long-life hot-mix asphalt pavements10.1016/j.conbuildmat.2014.05.091 ↗
19. Effects of aging on the properties of asphalt at the nanoscale10.1016/j.conbuildmat.2015.01.059 ↗
20. Shen · 1999
21. The effect of long-term oxidation on the rheological properties of polymer modified asphalts☆10.1016/S0016-2361(03)00144-3 ↗
22. Evaluation of aging behaviors of asphalt with different thermochromic powders10.1016/j.conbuildmat.2017.08.161 ↗
23. Effect of ageing on bitumen chemistry and rheology10.1016/S0950-0618(01)00033-2 ↗
24. Effects of short-term aging on asphalt binders and hot mix asphalt at elevated temperatures and extended aging time
25. Performance evaluation of high-elasticity asphalt mixture containing inorganic nano-titanium dioxide for applications in high altitude regions10.1016/j.conbuildmat.2018.12.053 ↗
26. Anti-ultraviolet aging tests of asphalts adapting to environment in Tibetan Plateau of China
27. Ground-based measurements of solar ultraviolet radiation in Tibet: preliminary results10.1029/97GL01319 ↗
28. Ultraviolet radiation over China: spatial distribution and trends10.1016/j.rser.2017.03.102 ↗
29. Ageing by UV radiation of an elastomer modified bitumen10.1016/j.fuel.2008.02.008 ↗
30. Laboratory study on ultraviolet radiation aging of bitumen10.1061/(ASCE)MT.1943-5533.0000010 ↗
31. Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review10.1016/j.conbuildmat.2013.09.007 ↗
32. Interaction effects of crumb rubber modified asphalt binders10.1016/j.conbuildmat.2009.10.024 ↗
33. Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt10.1016/j.conbuildmat.2008.12.009 ↗
34. Caltrans use of scrap tires in asphalt rubber products: a comprehensive review10.1016/S2095-7564(15)30087-8 ↗
35. Additives in asphalt
36. Becker · 2001
37. Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)10.1002/app.35417 ↗
38. Synthesis and characterization of liquid natural rubber as impact modifier for epoxy resin10.1016/j.phpro.2014.07.019 ↗
39. The effect of a liquid CTBN rubber modifier on the thermo-kinetic parameters of an epoxy resin during a pultrusion process10.1016/S0266-3538(02)00269-5 ↗
40. Physical, rheological and chemical characterization of aging behaviors of thermochromic asphalt binder10.1016/j.fuel.2017.09.111 ↗
41. Aging rheological characteristics of SBR modified asphalt with multi-dimensional nanomaterials10.1016/j.conbuildmat.2017.06.121 ↗
42. Characterization of fume composition and rheological properties of asphalt with crumb rubber activated by microwave and TOR10.1016/j.conbuildmat.2017.07.199 ↗
43. Modification and validation of linear amplitude sweep test for binder fatigue specification10.3141/2207-13 ↗
44. Johnson · 2010
45. Practical application of continuum damage theory to fatigue phenomena in asphalt concrete mixtures (With Discussion and Closure)
46. Rheological and aging behaviors of base and SBS modified asphalt with thermochromic microcapsule10.1016/j.conbuildmat.2018.12.083 ↗
47. Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive10.1016/j.conbuildmat.2010.06.087 ↗
48. Asphalt modification using nano-materials and polymers composite considering high and low temperature performance10.1016/j.conbuildmat.2016.12.073 ↗
49. Effects of steel slag fillers on the rheological properties of asphalt mastic10.1016/j.conbuildmat.2017.04.034 ↗
50. Characteristics of steel slag filler and its influence on rheological properties of asphalt mortar10.1016/j.conbuildmat.2018.12.174 ↗
51. DYNAMIC rheology and hot-mix performance of polymer modified asphalt (with discussion and closure)
52. Xiaoning · 2006
53. Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber10.1016/j.polymer.2007.11.030 ↗
54. Riew · 1984
55. Investigation of mechanical behavior for a selected rubber-modified epoxy adhesive