journal article·2019-12Open access

Influence of the microstructure of TMT reinforcing bars on their corrosion behavior in concrete with chlorides

A. Bautista, J.C. Pomares, M.N. González, F. Velasco

Abstract

Thermomechanically treated (TMT) carbon steel bars, often known as TempCoreTM bars, are commonly used as reinforcements in concrete structures. TMT causes the formation of a martensite case in the outer surface of the bars, increasing their hardness, while the remaining ferritic-perlitic core maintains the typical ductility of hot rolled bars. In this work, the effect of this TMT induced microstructure on the development of pitting attacks in chloride media has been analyzed in depth. Electrochemical impedance spectroscopy (EIS) measurements and polarization curves have been carried out in simulated pore solutions to understand the effect of the presence of different phases in the microstructure and to quantify the strength of the galvanic couple that the outer martensite can form with the inner core. Moreover, accelerated corrosion tests in chloride contaminated concrete slabs have been performed. Bars from six different slabs where corrosive attack has been forced for different times have been studied. The shape of the main pits in the bars corroded in concrete has been analyzed through optoelectronic microscopy and the results obtained prove that the depth of the attack is related to the microstructure of the TMT bars.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Prediction model of chloride diffusion in concrete considering the coupling effects of coarse aggregate and steel reinforcement exposed to marine tidal environment10.1016/j.conbuildmat.2019.04.221 ↗
2. Calculation of chloride ion diffusion in glass and polypropylene fiber-reinforced concrete10.1016/j.conbuildmat.2019.04.246 ↗
3. Residual behaviour of steel rebars and R/C sections after fire10.1016/j.conbuildmat.2009.06.050 ↗
4. Experimental evaluation of mechanical properties of steel reinforcement at elevated temperature10.1016/j.firesaf.2009.05.004 ↗
5. Corrrosion behaviour of high strength TMT steel bars for reinforcing cement concrete structures10.1016/j.proeng.2015.11.084 ↗
6. Microstructure, mechanical properties and corrosion performance of a few TMT rebars10.1080/1478422X.2016.1141744 ↗
7. High and low cycle fatigue performance comparison between micro alloyed and TMT rebar10.1016/j.conbuildmat.2013.12.061 ↗
8. EN 10080:2005 standard, Steel for the reinforcement of concrete – Weldable reinforcing steel – General.
9. Hardened case properties and tensile behaviors of TMT steel bars10.12691/ajme-2-1-2 ↗
10. Experimental investigation and simulation of structure and tensile properties of Tempcore treated rebar10.1016/j.jmatprotec.2015.11.023 ↗
11. Modeling and experiment on microstructure evolutions and mechanical properties in grade 600 MPa reinforcing steel rebar subjected to TempCore process10.1016/j.msea.2018.12.079 ↗
12. Prediction of hardness of the tempered martensitic rim of TMT rebars10.1016/j.msea.2012.02.041 ↗
13. Tensile and impact behavior of thermomechanically treated and micro-alloyed medium carbon steel bar10.1016/j.conbuildmat.2018.10.098 ↗
14. Residual mechanical behavior of (SD 500) hot rolled TMT reinforcing steel bars after elevated temperatures10.1016/j.conbuildmat.2018.09.008 ↗
15. Low cycle fatigue performance evaluation of TMT rebar
16. Some considerations on the effect of chloride ions on the corrosion of steel reinforcements embedded in concrete structures10.1680/macr.1998.50.3.189 ↗
17. Experimental investigations on the influence of cover depth and concrete quality on time to cover cracking due to carbonation-induced corrosion of steel in RC structures in an urban, inland environment10.1016/j.conbuildmat.2018.11.215 ↗
18. Effect of alloying elements on tensile properties, microstructure, and corrosion resistance of reinforcing bar steel10.1007/s11665-008-9336-z ↗
19. Corrosion of coupled steels with different microstructures in concrete environment10.1016/j.conbuildmat.2018.02.083 ↗
20. Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement10.1016/j.conbuildmat.2017.05.079 ↗
21. Chloride-induced corrosion of steel reinforcement- Mechanical performance and pit depth analysis10.1016/j.conbuildmat.2012.07.087 ↗
22. Mechanical behaviour of corroded reinforced concrete beams – Part 2: Bond and notch effects10.1007/BF02480534 ↗
23. Static and fatigue behaviour investigation of artificial notched steel reinforcement10.3390/ma10050532 ↗
24. Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ-ε behaviour10.1016/j.conbuildmat.2015.10.139 ↗
25. Influence of the forming process of corrugated stainless steel on their corrosion behaviour in simulated pore solutions10.1016/j.corsci.2012.01.010 ↗
26. Propagation of corrosion and corrosion patterns of bars embedded in RC beams stored in chloride environment for various periods10.1016/j.conbuildmat.2017.03.210 ↗
27. Z. Zhao, L. Fu. The probability distribution of pitting for accelerated corrosion reinforcement. Case Studies Contr. Mater. (in press). https://doi.org/10.1016/cscm.2018.e00193
28. Corrugated stainless steels embedded in mortar for 9 years: Corrosion results of non-carbonated, chloride-contaminated samples10.1016/j.conbuildmat.2015.04.060 ↗
29. UNE 36065:2011, Barras corrugadas de acero soldable con características especiales de ductilidad para armaduras de hormigón armado.
30. Weldability characteristics of torr and corrosion-resistant TMT bars using SMAW process10.1361/105994902770343881 ↗
31. Bard · 1980
32. Electrochemical tests
33. Considerations on reproducibility of potential and corrosion rate measurements in reinforced concrete10.1016/j.corsci.2004.02.003 ↗
34. On site measurements of corrosion rate of reinforcements10.1016/S0950-0618(00)00063-5 ↗
35. Mathematical models to predict the mechanical behaviour of reinforcements depending on their degree of corrosion and the diameter of the rebars10.1016/j.conbuildmat.2014.03.003 ↗
36. Study of mechanical properties of corroded steels embedded in concrete with the modified surface length10.1016/j.conbuildmat.2016.04.109 ↗
37. Influence of the cold working induced martensite on the electrochemical behavior of AISI 304 stainless steel surfaces10.1016/j.jmrt.2018.10.004 ↗
38. ASTM 876-15. Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete.
39. P Castro Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
40. Corrosion and corrosion inhibition of reinforcing steel10.1179/000705970798324450 ↗
41. Chloride-induced corrosion of steel rebars in simulated pore solutions of alkali-activated concretes10.1016/j.cemconres.2017.08.006 ↗
42. Threshold concentration of chlorides in concrete for stainless steel reinforcement: Classic austenitic and new duplex stainless steel10.1016/j.conbuildmat.2018.07.081 ↗
43. Corrosion performance of reinforcing steel in concrete under simultaneous flexural load and chlorides attack10.1016/j.conbuildmat.2017.05.092 ↗
44. Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: a new approach10.1016/j.conbuildmat.2016.02.047 ↗
45. Welded, sand-blasted stainless steel corrugated bars in non-carbonated and carbonated mortars: A 9-year corrosion study10.1016/j.corsci.2015.10.029 ↗