Analysis of the improved water-resistant properties of plaster compounds with the addition of plastic waste
Source abstract
Abstract
The aim of this article is to analyse the water-resistant properties of gypsum compounds with plastic cable waste added in order to determine the suitability of their use as an alternative to combat moisture problems in buildings. In the experimental process, test samples were made and subjected to capillary water absorption, water vapour permeability, wet chamber, water-stove cycle and total water absorption tests, and their porosimetry was also studied using the mercury porosimetry test. The results showed a significant decrease in water absorption and retention capacity. This is due in part to the reduced pore volume of the compounds that is achieved without affecting the hygrothermal properties of the gypsum products and keeping their mechanical properties above the minimum values indicated in the regulations. Thus, the material studied is a good alternative to the gypsums currently available on the market to be applied in the areas of buildings most exposed to water and it contributes to reduce environmental impacts. (C) 2019 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Evaluación de la humedad por condensación de viviendas sociales10.5354/0718-8358.2005.62167 ↗
2. Sardiña · 2011
3. Zaruma Uzhca · 2018
4. L. de Villanueva Domínguez, A. García Santos, Manual del yeso, CIE Inversiones Editoriales-DOSSAT 2000, Madrid (España), 2001.
5. CTE, Código Técnico de la Edificación, BOE Núm. 74. (2006) 11816–11831.
6. EN ISO 13788:2016 Características higrotérmicas de los elementos y componentes de edificación. Temperatura superficial interior para evitar la humedad superficial crítica y la condensación intersticial. Métodos de cálculo, (2016).
7. L.C. Huerta, Estudio del envejecimiento climático en plásticos agrarios mediante difracción de rayos X, Universidad Politécnica de Madrid (España), 2017. doi:oai:oa.upm.es:47937.
8. Analysis of the feasibility of the use of CDW as a low-environmental-impact aggregate in conglomerates10.1016/j.conbuildmat.2018.05.011 ↗
9. PlasticsEurope, An analysis of European plastics production, demand and waste data, (2018). https://www.plasticseurope.org/es/resources/publications/1240-plasticos-situacion-en-2018 (accessed May 5, 2019).
10. Elaboración de planchas celuplásticas a través o del reciclaje de celulosa residual y tereftalato de polietileno (PET)10.48190/cumbres.v1n2a10 ↗
11. Silvestre Velasquez · 2017
12. Mezclas asfálticas modificadas con un elastómero (caucho) y un plastómero (tiras de bolsas de leche con asfalto 80–100)
13. Proceso de transformación de la materia prima para tableros de madera plástica
14. Pastor Castillo · 2015
15. Arrascue Bazán · 2017
16. E. García De Los Santos, M. Martínez Mateo, A. Nina Pérez, A. Mejía Suero, A. Olivo Nuñez, B. Morantín Ventura, F. Ortiz, I. Escorbores, I. Roberto Féliz, Estudio de factibilidad bloques de hormigón con agregado de residuo plástico ABS, Elev. LACCEI Lat. Am. Caribb. Conf. Eng. Technol. (2013) 1–10.
17. M. del Río Merino, Elaboración y aplicaciones constructivas de paneles prefabricados de escayola aligerada y reforzada con fibras de vidrio E y otros aditivos, PhD, Universidad Politécnica de Madrid (España), 1999. doi:oai:oa.upm.es:612.
18. Mezclas de residuos de poliestireno expandido (EPS) conglomerados con yeso o escayola para su uso en la construcción10.3989/ic.2008.v60.i509.589 ↗
19. Nuevos materiales de base yeso con incorporación de residuos de caucho: caracterización físico-mecánica., Actas IX Jornadas Iberoam
20. P. Villoria Sáez, M. del Río Merino, A. San-Antonio González, Material de construcción ligero fabricado con yeso y residuo de poliestireno extruido, Proc. II Int. Congr. Sustain. Constr. Eco-Efficient Solut. Sev. 25-27 Mayo. (2015) 443–451.
21. Characterization of gypsum plasterboard with polyurethane foam waste reinforced with polypropylene fibers10.3989/mc.2016.06015 ↗
22. Herrero del Cura · 2016
23. Properties of gypsum composites containing vermiculite and polypropylene fibers: numerical and experimental results10.1016/j.enbuild.2013.11.047 ↗
24. Caracterización de compuestos de escayola reforzados, en relación con el tipo de refuerzo y la relación A/Y10.3989/ic.2004.v56.i493.436 ↗
25. A. Samková, P. Kulhavy, M. Pechočiaková, Possibilities to improve electromagnetic shielding of plaster composites adding carbon fibers, in: IOP Conf. Ser. Mater. Sci. Eng., 2017: p. UNSP 042025. doi:10.1088/1757-899X/254/4/042025.10.1088/1757-899X/254/4/042025 ↗
26. Analytical modeling of strength in randomly oriented PP and PPTA short fiber reinforced gypsum composites10.1016/j.commatsci.2010.12.020 ↗
27. UNE-EN 13279-1:2009, Yesos de construcción y conglomerantes a base de yeso para la construcción. Parte 1: definiciones y especificaciones, 2009.
28. UNE-EN 13279-2:2014, Yesos de construcción y conglomerantes a base de yeso para la construcción. Parte 2: Métodos de ensayo, 2014.
29. RILEM RC 25-PEM, Recommended tests to measure the deterioration of stone and to assess theeffectiveness of treatment methods, Mater. Struct. 13 (1980) pp. 175–253.10.1007/BF02473564 ↗
30. UNE-EN ISO 12572:2016, Prestaciones higrotérmicas de los productos y materiales para edificación. Determinación de las propiedades de transmisión de vapor de agua. Método de la taza, (2017).
31. UNE-EN ISO 12572:2016, Placas de yeso laminado. Definiciones, especificaciones y métodos de ensayo, (2010).
32. Mejía Betancourt · 2017
33. Recycling of gypsum plasterboard lightened with polyurethane waste