Development of low absorption and high-resistant sodium acetate concrete for severe environmental conditions
Source abstract
Abstract
This research presents new insight on the performance of concrete when integrated with sodium acetate and cured under extremely harsh environmental conditions: freezing temperature of −25 °C and hot temperature of 60 °C. Mechanical properties, water absorption, microstructural analysis and interaction mechanism of concrete and sodium acetate were evaluated by conducting the compressive strength test, Initial Surface Absorption Test (ISAT), Scanning Electron Microscope (SEM) analysis and Fourier-transform Infrared Spectroscopy (FTIR) analysis. Despite the harsh curing conditions, results showed an enhancement of 64% in compressive strength when 4% (based on the weight of cement) sodium acetate is incorporated within concrete with w/c ratio of 0.32 and cured under temperature of 60 °C. Also, water absorption was observed to decrease by more than 79% when 2% sodium acetate is added to concrete with w/c ratio of 0.32. SEM and FTIR analyses revealed the formation, high distribution and strong bonding of sodium acetate crystals within the concrete’s micropores.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Influence of environmental temperatures on the concrete compressive strength: Simulation of hot and cold weather conditions10.1016/j.cemconres.2005.01.004 ↗
2. Effect of curing conditions on strength, porosity, absorptivity, and shrinkage of concrete in hot and dry climate10.1016/0008-8846(94)90124-4 ↗
3. Fundamental interaction of hydrophobic materials in concrete with different moisture contents in saline environment10.1016/j.conbuildmat.2019.02.119 ↗
4. Optimum mix design for internally integrated concrete with crystallizing protective material10.1061/(ASCE)MT.1943-5533.0002694 ↗
5. Use of tabletting & coating accelerator for the prevention of early-frost of concrete in cold weather10.1016/j.coldregions.2012.11.005 ↗
6. Development of hydrophobic concrete by adding dual-crystalline admixture at mixing stage10.1002/suco.201700254 ↗
7. Influence of early water exposure on modified cementitious coating10.1016/j.conbuildmat.2017.02.159 ↗
8. Influence of crystalline admixture on fresh concrete to develop hydrophobicity
9. Performance enhancement of self-compacting concrete in saline environment by hydrophobic surface protection10.1139/cjce-2018-0546 ↗
10. Remediation and protection of masonry structures with crystallising moisture blocking treatment10.1108/IJBPA-02-2017-0011 ↗
11. Moisture evaluation of concrete pavement treated with hydrophobic surface impregnants
12. Hydrophobic treatment of concrete10.1016/S0950-0618(97)00046-9 ↗
13. Surface treatments for concrete: assessment methods and reported performance10.1016/S0950-0618(97)00019-6 ↗
14. Performance of silane impregnants for the protection of reinforced concrete
15. Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: the role of cracks10.1016/j.cemconcomp.2009.11.001 ↗
16. Integration of anhydrous sodium acetate (ASAc) into concrete pavement for protection against harmful impact of deicing salt
17. Moisture efficacy of impregnant in concrete protection
18. A brief overview of the potential environmental hazards of ionic liquids10.1016/j.ecoenv.2013.10.019 ↗
19. Crystallization technology for reducing water permeability into concrete10.1021/ie070527l ↗
20. British Standards Institution. BS 1881-125:2013: Testing concrete. Methods for mixing and sampling fresh concrete in the laboratory. 2013.
21. British Standards Institution. BS 1881-208:1996: Testing concrete. Recommendations for the determination of the initial surface absorption of concrete. 1996.
22. British Standards Institution. BS EN 12390-3:2009: Testing hardened concrete. Compressive strength of test specimens. 2009.
23. Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete10.1016/S0008-8846(01)00601-9 ↗
24. United States Environmental Protection Agency. Sodium Acetate 127-09-3 | DTXSID2027044. https://comptox.epa.gov/dashboard/dsstoxdb/results?search=DTXSID2027044 (Accessed 05 July 2019)
25. Sharma · 1997
26. Chang · 2005
27. Cold weather concreting admixtures10.1016/S0958-9465(97)00063-2 ↗
28. Influence of cold weather during casting and curing on the stiffness and strength of concrete10.1016/j.conbuildmat.2013.03.016 ↗