journal article·2020-01

Ecological bricks from dimension stone waste and polyester resin

Maiccon Martins Barros, Marcelo Ferreira Leão de Oliveira, Roberto Carlos da Conceição Ribeiro, Daniele Cruz Bastos, Márcia Gomes de Oliveira

Publisher page

Abstract

Abstract In this work, the viability of using dimension stone (limestone) waste by mixing them with polyester resin to produce a new type of ecological brick, in the model of soil-cement bricks, was tested. First, limestone waste were characterized by infrared spectroscopy (FTIR), thermogravimetry/derivative thermogravimetry analysis (TG/DTG), X-ray diffraction (XRD), X-ray fluorescence spectrometry (XRF) and scanning electron microscopy (SEM). Second, the polyester resin was analyzed by FTIR and TG/DTG. Then the materials were mixed manually in a plastic beaker with the aid of a glass stick, and the limestone/polyester composites were compounded in ratios of 70/30, 80/20, 85/15 and 90/10 (weight percentage). The amount of curing agent (methyl ethyl ketone peroxide, MEKP) used for each composition was 0.6, 0.4, 0.3 and 0.2 mL, respectively. After the mixing step, the specimens were cylindrically shaped for the compression test (ASTM D695). The 70/30 composite presented the highest compressive strength, with a value of approximately 54 MPa, followed by 80/20, 85/15 and 90/10. The 90/10 composite, despite presenting a lower result than the other composites, achieved the value required by the standard at 600%, and its use will imply a lower cost due to the use of only 10% resin, plus the benefit of 90% waste no longer discarded in the environment. Due to these factors, the 90/10 composite was selected to be produced in real scale (prototype) and properly characterized. The bricks thus obtained were submitted to tests of compression (NBR 8492), water absorption (NBR 8492), TG/DTG and flammability (ASTM D635). The compressive strength of the limestone/polyester (90/10) brick was 280% and 350% higher when compared to the soil-cement brick and to the requirements for building bricks, respectively. The mean value of water absorption for the soil-cement brick was approximately 16.3%, close to the limit required by the standard (20%). In contrast, the value for the limestone/polyester (90/10) ecological brick was only 4%. The flammability test results showed that pure polyester resin has a tendency to propagate flames, but in the limestone/polyester (90/10) ecological brick, no propagation occurred because inorganic matter increased fire resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Towards sustainable bricks production: an overview10.1016/j.conbuildmat.2018.01.038 ↗
2. Ecycling of dimensional stone waste in concrete: a review10.1016/j.jclepro.2016.06.126 ↗
3. A simple novel mix design method and properties assessment of foamed concretes with limestone slurry waste10.1016/j.jclepro.2017.10.073 ↗
4. Optimization of bricks production by earth hypercompaction prior to firing
5. Fabrication of geopolymer bricks using ceramic dust waste10.1016/j.conbuildmat.2017.09.052 ↗
6. Development of rubberized geopolymer interlocking bricks
7. Preparation of eco-friendly construction bricks from hematite tailings10.1016/j.conbuildmat.2010.11.025 ↗
8. Preparation of high strength autoclaved bricks from hematite tailings10.1016/j.conbuildmat.2011.08.078 ↗
9. Incorporation of wastes from granite rock cutting and polishing industries to produce roof tiles10.1016/j.jeurceramsoc.2008.05.045 ↗
10. Chemical and mineralogical characterization and soil reactivity of Brazilian waste limestones10.1016/j.apcbee.2014.01.002 ↗
11. Limestone biodeterioration: a review on the Portuguese cultural heritage scenario
12. Clay-bricks from recycled rock tailings
13. Recycling of water treatment plant waste for production of soil-cement bricks10.1016/j.mspro.2015.04.064 ↗
14. Influência da incorporação de lodo de estação de tratamento de água (ETA) nas propriedades tecnológicas de tijolos solo-cimento10.1590/S0366-69132013000400010 ↗
15. Reuse of waste grits for the production of soilecement bricks10.1016/j.jenvman.2013.09.040 ↗
16. R.C.C. Ribeiro, M.G. Oliveira, M.N. Conceição, 2013. Processo de formação de papel polimérico utilizando como carga resíduos gerados na lavra e no beneficiamento de rochas ornamentais. Patente depositada BR1020130188816, INPI. Available in: https://gru.inpi.gov.br/pePI/servlet/PatenteServletController?Action=detail&CodPedido=1010119&SearchParameter=BR1020130188816%20%20%20%20%20%20&Resumo=&Titulo (accessed 12 March 2019).
17. R.C.C. Ribeiro, M.G. Oliveira, 2015. Processo de formação de tubetes e/ou vasos poliméricos agrícolas utilizando como carga, resíduos minerais. Patente depositada BR1020150182465, INPI. Available in: https://gru.inpi.gov.br/pePI/servlet/PatenteServletController?Action=detail&CodPedido=1339566&SearchParameter=BR1020150182465%20%20%20%20%20%20&Resumo=&Titulo (accessed 12 March 2019).
18. R.C.C. Ribeiro, M.G. Oliveira, N. Souza, 2016. Processo de formação de papel Braille polimérico utilizando como carga resíduos gerados na lavra e no beneficiamento de rochas ornamentais. Patente depositada BR1020160082854, INPI. Available in: https://gru.inpi.gov.br/pePI/servlet/PatenteServletController?Action=detail&CodPedido=1376226&SearchParameter=BR1020160082854%20%20%20%20%20%20&Resumo=&Titulo (accessed 12 March 2019).
19. R.C.C. Ribeiro, M.G. Oliveira, D.P.S. Dalto, N. Toscano, 2017. Processo de obtenção de piso gerador de energia a partir de resíduos do corte de rochas ornamentais. Patente depositada BR1020170210197, INPI. Available in: https://gru.inpi.gov.br/pePI/servlet/PatenteServletController?Action=detail&CodPedido=1431715&SearchParameter=BR1020170210197%20%20%20%20%20%20&Resumo=&Titulo (accessed 12 March 2019).
20. In-situ investigations of the curing of a polyester resin10.1016/j.polymertesting.2011.10.004 ↗
21. ASTM – American Society for Testing Materials. Standard Test Method for Compressive Properties of Rigid Plastics. West Conshohocken, PA (2015). D95-15.
22. Associação Brasileira de Normas Técnicas – ABNT (1984). NBR 8492: Tijolo maciço de solo-cimento – Determinação da resistência à compressão e da absorção d’água. Rio de Janeiro, Brazil.
23. ASTM – American Society for Testing Materials. Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position. West Conshohocken, PA (2010). D635-10.
24. Heat resistance and surface properties of polyester resin modified with fluorosilicone10.1016/j.surfcoat.2016.06.075 ↗
25. Microbial-induced CaCO3filled seaweed-based film for green plasticulture application10.1016/j.jclepro.2018.07.111 ↗
26. Compósito de Resina de poliéster insaturada com bagaço de cana-de-açúcar: influência do tratamento das fibras nas propriedades10.1590/S0104-14282010005000034 ↗
27. O efeito da granulometria na decrepitação durante a decomposição térmica de calcários e carvão10.1590/S0100-40422004000100012 ↗
28. Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais
29. Lead and cadmium immobilization on calcitic limestone materials10.1016/j.desal.2010.04.043 ↗
30. Sintering of nascent calcium oxide10.1016/0009-2509(89)85232-7 ↗
31. Caracterização tecnológica de um calcário dolomítico in natura, calcinado e sulfatado como meio dessulfurante10.1590/S0366-69132013000200020 ↗
32. E. Siqueira, A.G. Amaral, R.M. Schneider, C. Atoatti, Características mecânicas de tijolos ecológicos com incorporação de resíduo, Nativa, Sinop, 4 (2016) 170-174. DOI:10.14583/2318-7670.v04n03a09.10.14583/2318-7670.v04n03a10 ↗
33. Gorninski · 2002
34. Presa · 2011
35. Use of manufacture residue of fluidized-bedcatalyst-cracking catalyzers as flame retardant in recycled high density polyethylene10.1016/j.jmrt.2018.11.015 ↗