journal article·2020-03

Studying the feasibility of a selection of Southern European ceramic clays for the production of lightweight aggregates

José Manuel Moreno-Maroto, Manuel Uceda-Rodríguez, Carlos Javier Cobo-Ceacero, Teresa Cotes-Palomino, Carmen Martínez-García, Jacinto Alonso-Azcárate

Publisher page

Abstract

Nine clays traditionally used in the ceramic brick and tile sector in Southern Europe were evaluated for the production of lightweight aggregates: four from Spain, three from Portugal and two from Italy. The clays’ suitability was thoroughly examined according to their capacity for pelletizing, their tendency to burst during heating, the firing temperature and their technological properties. A greater proportion of phyllosilicates over nonplastic components is directly related to the bursting of the pellets during preheating. Increased sand contents and SiO2/(∑Flux = K2O + Na2O + CaO + MgO + FeO + Fe2O3) ratios are connected to higher firing temperatures, the opposite occurring with the MgO percentage. Those clays with a higher iron content (highlighting in this study the two Italian clays and the Spanish red one) would be more optimal for the development of an expanded structure. The findings of this work show that Southern Europe holds clay deposits with enormous potential in the production of lightweight aggregates. In particular, the red clay from the Zocca deposit (Italy) is remarkable for its excellent characteristics for the production of expanded lightweight aggregates (bloating index of 24.4% and loose bulk density of 0.47 g/cm3). These raw materials could have a new market line due to the multiple applications of lightweight aggregate in construction (lightweight concrete), horticulture as well as in civil and environmental engineering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. ANEFA, El sector (The aggregate sector in Spain), Asociación Nacional de Empresarios Fabricantes de Áridos. http://www.aridos.org/el-sector/, 2018 (accessed 13.05.18).
2. FdA, Estadísticas (Statistics on aggregate production in Spain), Federación de Áridos. http://www.aridos.info/pagina.html?pagina=3, 2018 (accessed 14.08.18).
3. ESCSI, Expanded Shale, Clay and Slate Institute, Applications. https://www.escsi.org/applications/, 2018 (accessed 20.08.18).
4. Use of clay in the manufacture of lightweight aggregate10.1016/j.conbuildmat.2017.12.018 ↗
5. Clayey wastes-based lightweight aggregates: Heating transformations and physical/mechanical properties10.1016/j.clay.2017.09.011 ↗
6. The Maastrichtian-Danian Dakhla formation, eastern desert, egypt: utilization in manufacturing lightweight aggregates10.1016/j.clay.2017.08.027 ↗
7. Use of residual materials for synthesis of lightweight granulates by thermal treatment process10.1016/j.clay.2015.12.027 ↗
8. Relation of chemical properties to the bloating of clays10.1111/j.1151-2916.1951.tb11619.x ↗
9. Specifications for clayey raw materials used to produce expanded lightweight aggregates10.1007/BF02590206 ↗
10. Rupelian Boom clay as raw material for expanded clay manufacturing10.1016/0169-1317(93)90032-V ↗
11. Definition of clay and clay mineral: joint report of the AIPEA nomenclature and CMS nomenclature committees10.1346/CCMN.1995.0430213 ↗
12. Measuring and Modeling the Plasticity of Clays10.1590/S1516-14392010000300019 ↗
13. Los límites de Atterberg y su significado en la industria cerámica y ladrillera10.3989/mc.1966.v16.i124.1695 ↗
14. Workability test method for metals applied to examine a workability measure (plastic limit) for clays10.1016/S0169-1317(01)00042-4 ↗
15. A study of the plasticity of lightweight aggregate green bodies including bottom ash
16. Measuring the plasticity of clays: a review10.1016/j.clay.2010.10.028 ↗
17. Extrusion of ceramic emulsions: plastic behavior10.1016/j.clay.2014.08.021 ↗
18. Plastic limit and other consistency parameters by a bending method and interpretation of plasticity classification in soils10.1520/GTJ20160059 ↗
19. Development of lightweight aggregates from stone cutting sludge, plastic wastes and sepiolite rejections for agricultural and environmental purposes10.1016/j.jenvman.2017.05.085 ↗
20. Manufacturing of lightweight aggregates with carbon fiber and mineral wastes10.1016/j.cemconcomp.2017.08.001 ↗
21. ASTM D 4318-10e1, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2014.
22. What is clay? A new definition of “clay” based on plasticity and its impact on the most widespread soil classification systems10.1016/j.clay.2018.04.011 ↗
23. Zeolitic tuffs as raw materials for lightweight aggregates10.1016/j.clay.2003.08.005 ↗
24. Effects of sand addition on production of lightweight aggregates from tunisian smectite-rich clayey rocks10.1016/j.clay.2006.09.006 ↗
25. Lightweight aggregates based on industrial wastes
26. Martínez García, A study on the valorization of a metallic ore mining tailing and its combination with polymeric wastes for lightweight aggregates production10.1016/j.jclepro.2018.12.057 ↗
27. EN-1097-3, 1998. Tests for mechanical and physical properties of aggregates. Part 3: Determination of loose bulk density and voids. European Committee for Standardization.
28. EN-1097-6, 2013. Tests for mechanical and physical properties of aggregates. Part 6: Determination of particle density and water absorption. European Committee for Standardization.
29. Mechanical properties of lightweight aggregates10.1016/j.jeurceramsoc.2013.05.013 ↗
30. Análisis del peso específico y porosidad de materiales porosos mediante picnometría de helio
31. Relationship between particle size and fracture energy or impact velocity required to fracture as estimated from single particle crushing10.1016/0032-5910(87)80030-X ↗
32. Measurement and statistics of single pellet mechanical strength of differently shaped catalysts10.1016/S0032-5910(00)00231-X ↗
33. An apparatus for the determination of the workability and plastic limit of clays10.1016/j.clay.2013.04.014 ↗
34. The thermal behaviour of an Fe-rich illite10.1180/claymin.1996.031.1.04 ↗
35. M. Földvári, Handbook of thermogravimetric system of minerals and its use in geological practice. Occasional Papers of the Geological Institute of Hungary Vol. 213, Geological Institute of Hungary, Budapest, 2011. ISBN: 978-963-671-288-4.
36. F. Bergaya, G. Lagaly, General Introduction: Clays, Clay Minerals, and Clay Science, in: F. Bergaya, G. Lagaly (Eds), Handbook of Clay Science, Developments in Clay Science, Vol. 5A, second ed., Fundamentals, Amsterdam, 2013, pp. 1-19. ISBN: 9780080993645.10.1016/B978-0-08-098258-8.00001-8 ↗
37. Size-dependent melting behaviour of nanometre-sized Pb particles studied by dynamic mechanical analysis10.1088/0256-307X/23/6/053 ↗
38. O’Bannon · 1983 · 302
39. Influence of magnesia on iron ore sinter properties and productivity – use of dolomite and dunite
40. Assessment of crystalline phase changes and glass formation by Rietveld- XRD method on ceramic lightweight aggregates sintered from mineral and polymeric wastes10.1016/j.ceramint.2018.03.274 ↗
41. M. Arnould, Matières premières pour la fabrication de granulats légers. In Granulats et betons legers-Bilan de dix ans de recherches, by M. Arnould et M. Virlogeux. Presses de l'école nationale des ponts et chaussées, 1986, pp. 3-24.
42. Lightweight aggregates from waste materials: reappraisal of expansion behavior and prediction schemes for bloating10.1016/j.conbuildmat.2016.09.111 ↗
43. The mechanism of lightweight aggregate formation
44. M. Albenque, M. Arnould, G. Cougny, La fabrication des granulats d'argile et de schistes expansés. In Granulats et betons legers-Bilan de dix ans de recherches, de M. Arnould et M. Virlogeux. Presses de l'école nationale des ponts et chaussées, 1986, pp. 25–46
45. P.L. Owens, Lightweight aggregates for structural concrete. In: Structural Lightweight Aggregate Concrete by J.L. Clarke. Chapman & Hall, 1993. pp 1–18
46. Bloating mechanism of lightweight aggregate with the size10.4191/kcers.2016.53.2.241 ↗
47. EN-13055-1, 2002. Lightweight aggregates. Part 1: Lightweight aggregates for concrete, mortar and grout. European Committee for Standardization.