journal article·2020-03

Assessing the freezing process of early age concrete by resistivity method

Yuan Sang, Yingzi Yang

Publisher page

Abstract

Abstract In order to prevent damage to concrete due to early age freezing, it is very important to monitor the microstructure formation process and strength development of early-age concrete in winter construction. A resistivity method is presented in this study to assess the freezing process of early age concrete at different negative ambient temperatures. The results show that the freezing temperature leads to a sharp rise in resistivity of concrete. The evolution of resistivity can be divided into three stages, which are cooling and nucleuses formation stage, rapid crystallization stage and crystallization finish stage. In addition, some characteristic values, such as blocking time t1, maximum ice content time t2 and freezing rate α, are extracted from the resistivity-time relationship curve and further clarify the freezing process of concrete. There is a good log-linear relationship between resistivity and compressive strength, which can be used to predict the extent of frost damage to concrete. Moreover, the monitoring results of outdoor concrete resistivity confirm that this method is suitable for the evaluation of concrete frost damage on site during winter construction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Concrete and Cement Materials Research · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. ACI Committee 306. Guide to cold weather concreting ACI 306R-16. Farmington Hills, Michigan, American Concrete Institute, 2016.
2. Damage study on service performance of early-age frozen concrete10.1016/j.conbuildmat.2019.03.199 ↗
3. Experiment on the chloride ion diffusion coefficient of concrete with different water-cement ratio at the early age frost
4. T.R. Naik, Maturity functions for concrete cured during winter conditions. ASTM Special Technical Publication. 858 (11) (1985), pp. 107–117.10.1520/STP34210S ↗
5. Minimum curing time for preventing frost damage of early-age concrete10.1080/19373260802088475 ↗
6. Minimum curing time prediction of early-age concrete to prevent frost damage10.1016/j.conbuildmat.2010.09.021 ↗
7. Experimental research on early stage deformation of negative temperature concrete
8. Experimental study of deformation of early age concrete suffering from frost damage10.1016/j.conbuildmat.2019.04.187 ↗
9. Evaluation of frost damage in cement-based materials by a nonlinear elastic wave technique
10. ASTM, Standard test method for fundamental transverse, longitudinal, and torsional resonant frequencies of concrete specimens (ASTM C215-2014). American Society for Testing and Materials, West Conshohocken, 2014.
11. Determining porosity and pore network connectivity of cement-based materials by a modified non-contact electrical resistivity measurement: Experiment and theory10.1016/j.matdes.2018.06.045 ↗
12. A new model for the electrical conductivity of cement-based material by considering pore size distribution10.1680/jmacr.16.00535 ↗
13. Investigation of the capillary rise in cement-based materials by using electrical resistivity measurement10.1016/j.conbuildmat.2018.02.155 ↗
14. Critical features of microstructure development of early-age cement paste revealed by non-contact electrical resistivity measurement10.1016/j.conbuildmat.2017.08.046 ↗
15. Determination of the reinforced concrete strength by apparent resistivity depending on the curing conditions10.1016/j.jappgeo.2018.03.007 ↗
16. Early-age hydration of fresh concrete monitored by non-contact electrical resistivity measurement10.1016/j.cemconres.2007.09.027 ↗
17. Characterisation of pore structure development of alkali-activated slag cement during early hydration using electrical responses10.1016/j.cemconcomp.2018.02.016 ↗
18. Evaluation of the influence of a superplasticizer on the hydration of varying composition cements by the electrical resistivity measurement method10.1016/j.conbuildmat.2017.03.138 ↗
19. Evaluation of mortar setting time by using electrical resistivity measurements10.1016/j.conbuildmat.2017.04.088 ↗
20. Determination of concrete setting time using electrical resistivity measurement10.1061/(ASCE)0899-1561(2007)19:5(423) ↗
21. Evolutionary trace for early hydration of cement paste using electrical resistivity method10.1016/j.conbuildmat.2016.03.127 ↗
22. Farnam · 2015
23. Effect of moisture content on freeze–thaw behavior of cement paste by electrical resistance measurements10.1007/s10853-014-8126-2 ↗
24. P. Panchmatia, J. Olek, N. Whiting, M. Byers, T.E. Nantung. Concrete Conductivity: Effects of temperature, saturation and air content. Transportation Research Board 93rd Annual Meeting. 144 (2) (2014), pp.215-230.
26. Dimensional and ice content changes of hardened concrete at different freezing and thawing temperatures10.1016/j.cemconcomp.2009.09.001 ↗
27. Electrical response of mortar with different degrees of saturation and deicing salt solutions during freezing and thawing10.1016/j.cemconcomp.2015.03.003 ↗
28. Characterizing blended cement pastes under cyclic freeze–thaw actions by electrical resistivity10.1016/j.conbuildmat.2013.02.042 ↗
29. Freeze-thaw durability of concrete: ice formation process in pores10.1016/S0008-8846(98)00103-3 ↗
30. Theoretical model for estimation of ice content of concrete by using electrical measurements10.1016/j.proeng.2014.12.195 ↗
31. Conductivity/activation energy relationships for cement-based materials undergoing cyclic thermal excursions10.1007/s10853-014-8669-2 ↗
32. Freezing of water in Portland cement paste-an ac impedance spectroscopy study10.1016/S0958-9465(01)00078-6 ↗
33. Coupled AC impedance and thermomechanical analysis of freezing phenomena in cement paste10.1617/s11527-010-9635-3 ↗
34. Damage evolution during freeze-thaw cycling of cement mortar, studied by electrical resistivity measurement10.1016/S0008-8846(02)00856-6 ↗
35. Electrical resistivity of cement pastes undergoing cyclic freeze-thaw action10.1061/(ASCE)MT.1943-5533.0001042 ↗
36. A comparison of methods to evaluate mass transport in damaged mortar10.1016/j.cemconcomp.2016.03.007 ↗
37. Effect of early-age subfreezing temperature on grouted dowel precast concrete wall connections10.1016/j.conbuildmat.2017.02.144 ↗
38. Method for determining early-age frost damage of concrete by using air-permeability index and influence of early-age frost damage on concrete durability10.1016/j.conbuildmat.2017.07.140 ↗
39. Electrode configurations for resistivity measurements on concrete
40. Instantaneous in-situ determination of water-cement ratio of fresh concrete
41. ASTM, Estimating concrete strength by the maturity method (ASTM C1074-11). American Society for Testing and Materials, West Conshohocken, 2011.
42. Early age electrical resistivity behaviour of various concrete mixtures subject to low temperature cycling10.1016/j.cemconcomp.2017.07.028 ↗
43. Study on hydration process of early-age concrete using embedded active acoustic and non-contact complex resistivity methods10.1016/j.conbuildmat.2013.04.032 ↗
44. Influence of temperature and humidity on Portland cement mortar resistivity monitored with inner sensors10.1002/maco.200805075 ↗
45. Dielectric capacity, liquid water content, and pore structure of thawing-freezing materials10.1016/j.coldregions.2005.07.001 ↗
46. Pore size and shape in mortar by thermoporometry10.1016/j.cemconres.2009.11.011 ↗
47. Effect of pore solution freezing on thermal strain of water-saturated cement based material at low temperature by differential scanning calorimetry
48. Equivalent circuit model for AC electrochemical impedance spectroscopy of concrete10.1016/S0008-8846(00)00400-2 ↗
49. Clustering in supercooled water10.1063/1.1680718 ↗
50. Neville · 2011
51. A new method for the simultaneous determination of the size and shape of pores: the thermoporometry10.1016/0040-6031(77)85122-8 ↗
52. Interpretation of the impedance spectroscopy of cement paste via computer modelling - Part III Microstructural analysis of frozen cement paste10.1007/BF00356052 ↗
53. Observations of ice lens formation and frost heave in young Portland cement paste10.1016/S0008-8846(03)00103-0 ↗
54. Experimental study on the influence of different cooling rate to frost heave of silty clay10.4028/www.scientific.net/AMR.912-914.136 ↗
55. Experimental identification of ice formation in small concrete pores10.1016/j.cemconres.2004.01.022 ↗
56. The effects of low temperature curing on the compressive strength of ordinary and high performance concrete
57. Li · 2015