journal article·2020-04

Shear capacity of steel plates with random local corrosion

Zhongwei Zhao, Ni Zhang, Jinjia Wu, Youran Gao, Qingwei Sun

Publisher page

Abstract

Abstract Steel plates have been widely used in various structures, including buildings, bridges, ocean platforms, and industrial equipment. Corrosion is inevitable for steel plates adopted in these structures, of which pitting corrosion is one of the most common types. The shear capacity of steel plates is the most important performance utilized by steel structures, such as a steel plate shear wall. However, corrosion can significantly deteriorate the shear capacity of steel plates. Hence, the shear capacity of corroded steel plates is investigated to reveal the influence of corrosion. Stochastic numerical analysis is performed and the randomness of the pitting corrosion, including corrosion location and pitting size, is accurately considered. The relationship between shear capacity and mass loss ratio is the key research content. The influences of geometrical parameters and the constitutive model of steel on randomly corroded steel plates are investigated. Lastly, the changing trends of shear capacity and mass loss ratio are derived.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Integrity and Reliability Analysis · Corrosion Behavior and Inhibition · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Experimental study on generalized constitutive model of hull structural plate with multi-parameter pitting corrosion10.1016/j.oceaneng.2018.10.038 ↗
2. Ultimate strength of locally damaged panels10.1016/j.tws.2015.09.025 ↗
3. Experimental study on collapse of cracked stiffened plate with initial imperfections under compression10.1016/j.tws.2016.12.028 ↗
4. Analytical simulation of nonlinear elastic–plastic average stress–average strain relationships for un-corroded/both-sides randomly corroded steel plates under uniaxial compression10.1016/j.tws.2014.10.012 ↗
5. Effect of corrosion degradation on the ultimate strength of steel box girders10.1179/1743278212Y.0000000005 ↗
6. Reliability of maintained ship hulls subjected to corrosion10.5957/jsr.1996.40.3.235 ↗
7. Ultimate strength assessment of plated steel structures with random pitting corrosion damage10.1016/j.jcsr.2018.01.014 ↗
8. Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression10.1016/j.marstruc.2007.02.003 ↗
9. Effect of pitting corrosion on strength of web plates subjected to patch loading10.1016/j.tws.2005.09.004 ↗
10. Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression10.1016/j.oceaneng.2010.08.001 ↗
11. Influence of corrosion on the ultimate compressive strength of steel plates and stiffened panels
12. Strength assessment of a severely corroded box girder subjected to bending moment10.1016/j.jcsr.2013.09.010 ↗
13. Effect of corrosion severity on the ultimate strength of a steel box girder10.1016/j.engstruct.2012.11.017 ↗
14. Analysis of plate deflections during ultimate strength experiments of corroded box girders10.1016/j.tws.2012.01.010 ↗
15. Finite element investigation of shear capacity of locally corroded end panel of steel plate girder10.1007/s13296-013-4004-z ↗
16. Ultimate shear strength of plate elements with pit corrosion wastage10.1016/j.tws.2004.03.024 ↗
17. Influence of pitting-corrosion on bending capacity of thin-walled circular tubes10.1007/s40430-018-1475-z ↗
18. Probability distribution of the compression capacity of welded hollow spherical joints with randomly located corrosion10.1016/j.tws.2019.01.031 ↗
19. Assessment of the bending capacity of welded hollow spherical joints with pit corrosion10.1016/j.tws.2018.07.010 ↗
20. Shear strength degradation of steel plate shear walls with optional located opening10.1016/j.acme.2018.06.012 ↗
21. Implementation of M-PFI method in design of steel plate walls10.1016/j.jcsr.2007.09.005 ↗
22. Experimental investigation on cyclic behavior of perforated steel plate shear walls10.1016/j.jcsr.2011.09.016 ↗