journal article·2020-04

Influence of accelerator type and dosage on the durability of wet-mixed sprayed concrete against external sulfate attack

Renan P. Salvador, Dimas A.S. Rambo, Roberto M. Bueno, Silvio R. Lima, Antonio D. Figueiredo

Publisher page

Abstract

Abstract External sulfate attack in concrete comprises a series of interdependent processes resulting from the interaction of sulfate ions from the external environment and cement phases, resulting in matrix degradation. To obtain a sulfate-resisting matrix, C3A content in cement and water/cement ratio must be controlled. In sprayed concrete, accelerator type and dosage and the interaction between cement and accelerator are important parameters that control sprayed concrete strength and may influence the durability of the matrix. In this context, the objective of this study is to evaluate how accelerator type and dosage influence the durability of sprayed concrete exposed to a sulfate solution. Samples were analyzed by XRD, TGA, SEM, length change, US propagation velocity, compressive strength and water accessible porosity for 270 days. Results showed that sprayed concrete produced with accelerators presents a high deterioration rate due to sulfate attack. Kinetics of specimen expansion and reduction of compressive strength are directly related to the final SO3/Al2O3 ratio of the matrix. This study may be useful to understand how external sulfate attack occurs in sprayed concrete and to develop prediction models and guidelines.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Influence of early sulfate exposure on the pore network development of mortars10.1016/j.conbuildmat.2017.03.081 ↗
2. Degradation mechanism of slag blended mortars immersed in sodium sulfate solution10.1016/j.cemconres.2015.02.015 ↗
3. Effect of very high limestone content and quality on the sulfate resistance of blended cements10.1016/j.conbuildmat.2018.08.169 ↗
4. Alternative methodology to consider damage and expansions in external sulfate attack modeling10.1016/j.cemconres.2014.05.011 ↗
5. The confused world of sulfate attack on concrete10.1016/j.cemconres.2004.04.004 ↗
6. Current knowledge of external sulfate attack10.1680/adcr.14.00089 ↗
7. Simplified analytical assessment of damaged induced by the external sulphate attack in concrete piles
8. Mechanism of expansion of mortars immersed in sodium sulfate solutions10.1016/j.cemconres.2012.10.001 ↗
9. Thaumasite and secondary calcite in some Norwegian concretes10.1016/S0958-9465(03)00143-4 ↗
10. Thaumasite sulfate attack, popcorn calcite deposition and acid attack in concrete stored at the «Blindtarmen» test site Oslo, from 1952 to 198210.1016/j.matchar.2009.01.007 ↗
11. Evaluation of field concrete deterioration under real conditions of seawater attack10.1016/j.conbuildmat.2016.05.014 ↗
12. Durability of concrete containing fly ash and silica fume against combined freezing-thawing and sulfate attack10.1016/j.conbuildmat.2017.04.172 ↗
13. A state-of-the-art review on delayed ettringite attack on concrete10.1016/S0958-9465(02)00080-X ↗
14. American Concrete Institute, ACI 201, 201.2R-08, Guide to Durable Concrete, 2008.
15. Fédération internationale du béton. 2010. Fib model code for concrete structures 2010.
16. Brazilian Association of Technical Standards, NBR 6118:2014. Design of concrete structures - Procedure, 2014.
17. AENOR, UNE-EN 197-1:2011. Cement - Part 1: Composition, specifications and conformity criteria for common cements, 2011.
18. Effects of biaxial confinement in mortars exposed to external sulfate attack10.1016/j.cemconcomp.2018.10.017 ↗
19. I.G. Reyes, Characterization and control of wet-mix sprayed concrete with accelerators, 2013.
20. C. Herrera, Evaluación de mezclas proyectadas: comportamiento y durabilidad, 2017.
21. Durability of shotcrete for underground support–Review and update10.1016/j.conbuildmat.2018.12.151 ↗
22. Relation between chemical processes and mechanical properties of sprayed cementitious matrices containing accelerators10.1016/j.cemconcomp.2017.02.002 ↗
23. Influence of spraying on the early hydration of accelerated cement pastes10.1016/j.cemconres.2016.06.005 ↗
24. Relation between ultrasound measurements and phase evolution in accelerated cementitious matrices10.1016/j.matdes.2016.10.022 ↗
25. An evaluation of the sulfate resistance of cementitious material accelerated with alkali-free and alkaline admixtures: laboratory vs. field10.1016/S0008-8846(01)00739-6 ↗
26. On the relevance of volume increase for the length changes of mortar bars in sulfate solutions10.1016/j.cemconres.2013.01.002 ↗
27. The role of porosity in external sulphate attack10.1016/j.cemconcomp.2018.12.016 ↗
28. An effective transport model of sulfate attack in concrete10.1016/j.conbuildmat.2019.04.218 ↗
29. Durability of cement pastes exposed to external sulfate attack and leaching: physical and chemical aspects10.1016/j.cemconres.2018.11.006 ↗
30. Sulfate attack expansion mechanisms10.1016/j.cemconres.2013.07.005 ↗
31. Thaumasite sulfate attack in Portland and Portland-limestone cement mortars exposed to sulfate solution10.1016/j.conbuildmat.2012.09.104 ↗
32. Tensile strength of concrete exposed to sulfate attack10.1016/j.cemconres.2018.11.005 ↗
33. Comparison study on the sulfate attack resistivity of cement-based materials modified with nanoSiO2 and conventional SCMs: mechanical strength and volume stability10.1016/j.conbuildmat.2019.03.235 ↗
34. Improved volume stability of mortar bars exposed to magnesium sulfate in the presence of bicarbonate ions10.1016/j.cemconres.2018.04.022 ↗
35. Influence of bicarbonate ions on the deterioration of mortar bars in sulfate solutions10.1016/j.cemconres.2012.10.016 ↗
36. Experiment study on the failure mechanism of dry-mix shotcrete under the combined actions of sulfate attack and drying-wetting cycles10.1016/j.conbuildmat.2015.02.007 ↗
37. Direct shear behavior of sulfate-exposed shotcrete: experimental and modelling research10.1016/j.conbuildmat.2019.03.229 ↗
38. Damage layer thickness and formation mechanism of shotcrete with and without steel fiber under sulfate corrosion of dry–wet cycles by ultrasound plane testing method10.1016/j.conbuildmat.2016.06.146 ↗
39. Investigation of sulfate attack resistance of shotcrete under dry-wet cycles10.1007/s11595-016-1535-0 ↗
40. Mechanical properties, permeability and durability of accelerated shotcrete10.1016/j.conbuildmat.2015.07.148 ↗
41. On the use of blast-furnace slag in sprayed concrete applications10.1016/j.conbuildmat.2019.05.132 ↗
42. AENOR, UNE-EN 196-2. Methods of Testing Cement. Part 2: Chemical Analysis of Cement, 2013.
43. Parameters controlling early age hydration of cement pastes containing accelerators for sprayed concrete10.1016/j.cemconres.2016.09.002 ↗
44. P.D. James Speight, Lange’s Handbook of Chemistry, Sixteenth Edition, 16th ed., McGraw-Hill Education, New York, 2005. https://www.accessengineeringlibrary.com/content/book/9780071432207.
45. UNE-EN, EN 206-1. Concrete – Part 1: Specification, performance, production and conformity, 2013.
46. Numerical assessment of external sulfate attack in concrete structures. A review10.1016/j.cemconres.2019.04.010 ↗
47. Influence of sulfate solution concentration on the formation of gypsum in sulfate resistance test specimen10.1016/j.cemconres.2005.04.006 ↗
48. New procedure to investigate external sulphate attack on cementitious materials10.1016/j.cemconcomp.2011.11.010 ↗
49. T. Ikumi, New insights on the fundamentals and modeling of the external sulfate attack in concrete structures, 2017.
50. R. Snellings, X-ray powder diffraction applied to cement, in: A Pract. Guid. to Microstruct. Anal. Cem. Mater., CRC Press, 2015: pp. 107–176. doi:10.1201/b19074-5.10.1201/b19074-5 ↗
51. B. Lothenbach, P. Durdzinski, K.D.E. Weerdt, Thermogravimetric analysis, in: A Pract. Guid. to Microstruct. Anal. Cem. Mater., CRC Press, 2015: pp. 177–212. doi:10.1201/b19074-6.10.1201/b19074-6 ↗
52. K. Scrivener, A. Bazzoni, B. Mota, J. Rossen, Electron microscopy, in: A Pract. Guid. to Microstruct. Anal. Cem. Mater., CRC Press, 2015: pp. 351–418. doi: 10.1201/b19074-9.10.1201/b19074-9 ↗
53. ASTM, ASTM: C490 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste , Mortar , and Concrete 1, ASTM Int. (2008) 1–5.
54. AENOR, UNE 83980. Concrete durability. Test methods. Determination of the water absorption, density and accessible porosity for water in concrete, (2014) 6.
55. AENOR, UNE-EN 12390-3. Testing hardened concrete. Part 3: Compressive strength of test specimens, (2009) 20.
56. Monitoring of Portland cement chemical reaction and quantification of the hydrated products by XRD and TG in function of the stoppage hydration technique
57. Physical and microstructural aspects of sulfate attack on ordinary and limestone blended Portland cements10.1016/j.cemconres.2009.08.005 ↗
58. Thermodynamics of crystallization stresses in DEF10.1016/j.cemconres.2007.10.002 ↗
59. Stress from crystallization of salt10.1016/j.cemconres.2003.12.034 ↗
60. Effect of gypsum content in sprayed cementitious matrices: early age hydration and mechanical properties10.1016/j.cemconcomp.2018.10.015 ↗
61. The relationship between porosity and strength for porous concrete10.1016/j.conbuildmat.2011.05.005 ↗