journal article·2020-05Open access

Influence of nanoclays on flowability and rheology of SCC pastes

Hugo Varela, Gonzalo Barluenga, Irene Palomar

Abstract

SCC rheology is the key factor of fresh performance and its control is required to overcome cast in place issues regarding pumping and formwork lateral pressure that still limits its widespread use. Nanoclays are good candidates to improve rheological properties of cement pastes as yield stress, viscosity and thixotropy, controlling paste flow behavior. However, some interactions between nanoclays and admixtures can limit their efficiency. In this study, a comparative analysis on rheology and flowability of SCC cement pastes blended with limestone filler and 2 % by cement weight of four types of nanoclays, attapulgite, bentonite, and sepiolite in powder form and dispersed in water, is presented. Two water to binder ratios (w/b), 0.35 and 0.45, were considered and a high range water reducing admixture (HRWRA) was used to reach the required flowability. Water adsorption of nanoclays, flowability and rheological properties of SCC cement pastes with nanoclays were evaluated. It was found that HRWRA was less effective on pastes with nanoclays and low w/b, particularly bentonite. Sepiolite showed larger water adsorption and higher enhancing of rheological properties. It was observed that, the relation of nanoclays and HRWRA was decisive to produce flowability on pastes with low w/b. Besides, flowability was deeply affected by w/b, as water saturation of nanoclays increased HRWRA efficiency. All nanoclays modified rheological properties due to its different particles morphology characteristics, however sepiolite showed the largest effects and reached the higher values of yield stress, viscosity and thixotropy ratios used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Quality control parameters for on-site evaluation of pumped self-compacting concrete10.1016/j.conbuildmat.2017.07.223 ↗
2. Rheological behavior and formwork pressure of SCC, SFSCC, and NC mixtures10.1016/j.cemconcomp.2014.05.001 ↗
3. Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)10.1016/j.cemconres.2018.06.013 ↗
4. Fifty-cent rheometer for yield stress measurements: from slump to spreading flow10.1122/1.1879041 ↗
5. From mini-cone test to Abrams cone test: measurement of cement-based materials yield stress using slump tests10.1016/j.cemconres.2004.07.032 ↗
6. Identifying viscosity of cement paste from mini-slump-flow test
7. On the identification of rheological properties of cement suspensions: rheometry, Computational Fluid Dynamics modeling and field test measurements10.1016/j.cemconres.2012.05.007 ↗
8. Estimation of rheological properties of UHPC using mini slump test10.1016/j.conbuildmat.2015.12.106 ↗
9. The mini-conical slump flow test: analysis and numerical study10.1016/j.cemconres.2010.06.005 ↗
10. Performance-based design and optimization of rheological and strength properties of self-compacting cement composite incorporating micro/nano admixtures10.1016/j.compositesb.2019.01.028 ↗
11. Effect of vane configuration on yield stress measurements of cement pastes10.1016/j.jnnfm.2016.01.002 ↗
12. D. Feys, R. Cepuritis, S. Jacobsen, K. Lesage, E. Secrieru, A. Yahia, Measuring rheological properties of cement pastes: most common techniques, procedures and challenges, RILEM Tech. Lett. 2 (2017) 129–135, doi: 10.21809/rilemtechlett.2017.43.10.21809/rilemtechlett.2017.43 ↗
13. Q. Yuan, D. Zhou, K.H. Khayat, D. Feys, C. Shi, On the measurement of evolution of structural build-up of cement paste with time by static yield stress test vs. small amplitude oscillatory shear test, Cem. Concr. Res. 99 (2017) 183–189, doi: 10.1016/j.cemconres.2017.05.014.10.1016/j.cemconres.2017.05.014 ↗
14. Extension of the Reiner-Riwlin equation to determine modified Bingham parameters measured in coaxial cylinders rheometers10.1617/s11527-012-9902-6 ↗
15. Use of thixotropy-enhancing agent to reduce formwork pressure exerted by self-consolidating concrete
16. Correlating water extraction to viscosity variations of injection grouts10.1016/j.conbuildmat.2014.12.024 ↗
17. M. Tuyan, R.S. Ahari, T.K. Erdem, Ö.A. Çakır, K. Ramyar, Influence of thixotropy determined by different test methods on formwork pressure of self-consolidating concrete, Constr. Build. Mater. 173 (2018) 189–200. doi: 10.1016/j.conbuildmat.2018.04.046.10.1016/j.conbuildmat.2018.04.046 ↗
18. Measuring the thixotropy of conventional concrete: the influence of viscosity modifying agent, superplasticiser and water10.1016/j.conbuildmat.2019.07.240 ↗
19. A thixotropy model for fresh fluid concretes: theory, validation and applications10.1016/j.cemconres.2006.05.025 ↗
20. R. Ferron, A. Gregori, Z. Sun, S.P. Shah, Rheological Method to Evaluate Structural Build-Up in Self-Consolidating Concrete Cement Paste, ACI Mater. J. 104:3 (2007) 242-250. doi: 10.14359-18669.10.14359/18669 ↗
21. Non-linear modeling of yield stress increase due to SCC structural build-up at rest10.1016/j.cemconres.2016.11.020 ↗
22. Thixotropy of SCC—a model describing the effect of particle packing and superplasticizer adsorption on thixotropic structural build-up of the mortar phase based on interparticle interactions10.1016/j.cemconres.2017.11.004 ↗
23. Structural build-up of rigid fiber reinforced cement-based materials10.1617/s11527-012-9997-9 ↗
24. Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC)10.1016/j.cemconres.2018.02.019 ↗
25. H.H. Murray, Structure and Composition of the Clay Minerals and their Physical and Chemical Properties, in: Elsevier (Eds.), applied clay mineralogy occurrences, processing and application of kaolins, bentonites, palygorskite-sepiolite, and common clays, Amsterdam, The Netherlands, 2007, pp. 7–31.10.1016/S1572-4352(06)02002-2 ↗
26. A. Álvarez, J. Santarén, A. Esteban-Cubillo, P. Aparicio, Current Industrial Applications of Palygorskite and Sepiolite, in: Elsevier (Eds.), Developments in Palygorskite-Sepiolite Research: a new outlook on these nanomaterials, Amsterdam, The Netherlands, 2011, pp. 281–298, doi: 10.1016/B978-0-444-53607-5.00012-8.10.1016/B978-0-444-53607-5.00012-8 ↗
27. Clay in cement-based materials: critical overview of state-of-the-art10.1016/j.conbuildmat.2013.10.059 ↗
28. Influence of clays on the rheology of cement pastes10.1016/j.cemconres.2009.11.001 ↗
29. Rate of thixotropic rebuilding of cement pastes modified with highly purified attapulgite clays10.1016/j.cemconres.2013.05.019 ↗
30. Modification of cement-based materials with nanoparticles10.1016/j.cemconcomp.2012.06.012 ↗
31. Effect of mineral admixtures on the structural build-up of cement paste10.1016/j.conbuildmat.2017.11.050 ↗
32. Influence of nano-sized highly purified magnesium alumino silicate clay on thixotropic behavior of fresh cement pastes10.1016/j.conbuildmat.2014.07.050 ↗
33. Aggregation and breakage kinetics of fresh cement paste10.1016/j.cemconres.2013.03.002 ↗
34. Influence of bentonite clay on the rheological behaviour of fresh mortars10.1016/j.cemconres.2011.01.002 ↗
35. Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars10.1016/j.conbuildmat.2019.06.111 ↗
36. A study on the impact of different clay minerals on the dispersing force of conventional and modified vinyl ether based polycarboxylate superplasticizers10.1016/j.cemconres.2014.02.009 ↗
37. Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars – development of yield stress and plastic viscosity over time10.1016/j.cemconres.2014.07.003 ↗
38. Effect of polycarboxylate superplasticiser adsorption on fluidity of cement–clay system10.1179/1432891714Z.0000000001124 ↗
39. Interaction mechanisms between Na-montmorillonite clay and MPEG-based polycarboxylate superplasticizers10.1016/j.cemconres.2012.03.005 ↗