Fiberboards Based on Sugarcane Bagasse Lignin and Fibers
Source abstract
Abstract
Abstract Summary: Fiberboards were prepared using phenolic type resins (phenol‐formaldehyde) and sugarcane bagasse fibers. Lignin extracted through an organosolv process from sugarcane bagasse was used as substitute of phenol in phenolic resins from 40 (lignin‐phenol‐formaldehyde) to 100 wt.‐% (lignin‐formaldehyde) substitution. Some of the fibers were chemically modified by oxidation with chlorine dioxide and treatment with furfuryl alcohol (FA), leading to fibers coated with polyfurfuryl alcohol. Thermal analysis (DSC and TGA) of the prepolymers allowed setting up an efficient curing to prepare fiberboards. Impact strength and water absorption were measured showing the importance of the curing pressure to obtain good performance. When chemically modified fibers were used to prepare board samples, enhanced durability against white root fungi is observed, and to a less degree against brown root fungi. Sugarcane bagasse fiberboards were prepared from prepolymers where lignin substituted phenol up to 100%. This replaces these materials in advantageous position, relating to those prepared from phenol‐formaldehyde resins, due to their high content of renewable raw materials. The results obtained are promising for the utilization of sugarcane bagasse as raw materials for preparing fiberboards to be used in tropical areas. Stabilization of sugarcane bagasse fiberboards made with unmodified and modified (ClO2 + furfuryl alcohol) fibers and phenolic resin after 8 weeks exposure against fungi. magnified image Stabilization of sugarcane bagasse fiberboards made with unmodified and modified (ClO2 + furfuryl alcohol) fibers and phenolic resin after 8 weeks exposure against fungi.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Lignin and Wood Chemistry · Nanocomposite Films for Food Packaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Maloney T. M. · 1977
2. Pizzi A. · 1983 · 105
3. 10.1007/978-1-4419-9050-1_1210.1007/978-1-4419-9050-1_12 ↗
4. 10.1016/S0142-9418(01)00014-910.1016/S0142-9418(01)00014-9 ↗
5. 10.1016/j.indcrop.2004.04.01310.1016/j.indcrop.2004.04.013 ↗
6. 10.1016/j.ijadhadh.2004.01.00310.1016/j.ijadhadh.2004.01.003 ↗
7. 10.1016/j.compositesa.2005.01.00410.1016/j.compositesa.2005.01.004 ↗
8. 10.1016/j.compscitech.2004.09.02010.1016/j.compscitech.2004.09.020 ↗
9. 10.1002/mame.20030032010.1002/mame.200300320 ↗
10. 10.1021/bm05800610.1021/bm058006 ↗
11. M.Westin S.Lande M.Schneider Proceedings of the First European Conference on Wood Modification Ghent Belgium April 3–4 2003 289.
12. 10.1002/app.1322410.1002/app.13224 ↗
13. 10.1002/app.1008510.1002/app.10085 ↗
14. Paiva J. M. F. · 2000 · 229
15. 10.1007/BF0261535210.1007/BF02615352 ↗
16. 10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W ↗
17. 10.1016/S0960-8524(97)00030-810.1016/S0960-8524(97)00030-8 ↗
18. 10.1016/S0143-7496(02)00058-110.1016/S0143-7496(02)00058-1 ↗
19. 10.1016/j.polymdegradstab.2004.07.00510.1016/j.polymdegradstab.2004.07.005 ↗
20. Browning B. L. · 1967
21. Mark H. F. · 1993 · 981
22. Oliverio J. L. · Int. Sugar J. · 2004 · 106 · 168
23. 10.1002/app.1992.07045060410.1002/app.1992.070450604 ↗
24. 10.1016/j.compositesa.2004.04.00410.1016/j.compositesa.2004.04.004 ↗
25. Fengel D. · 1989
26. Van Krevelen D. W. · 1990 · 38
27. 10.1002/pc.75011030310.1002/pc.750110303 ↗
28. 10.1016/0266-3538(92)90055-810.1016/0266-3538(92)90055-8 ↗
29. Ray B. C. · J. Reinf. Plast. Compos. · 2006