Effect of carbon black on electrical curing of fresh concrete for cold regions
Source abstract
Abstract
Abstract Nowadays, there are many accelerated curing methods which are an important issue for early strengthening of concrete. It was aimed to accelerate the hydration of carbon-black-blended concrete by shortening the molding time, and to achieve concrete casting under cold weather. For this purpose; 0, 1, 2 and 3 percent of carbon black added to the concrete instead of cement by weight and the concrete was produced by electrical curing method. During the curing, 0, 45, 60 and 90 V voltage values were applied on fresh concrete for 24 h. The voltage applications were carried out at different temperatures as under ambient temperature conditions (22 °C), and at 0 °C and −10 °C using an air-conditioning cabinet. After the electrical curing process, the concrete samples were demoulded and cured in the standard curing pool for 7 and 28 days, and then physical and mechanical properties were investigated. It was found that increased carbon black ratio and stress intensity resulted with increase in the internal temperature of the concrete. With an increase in voltage and carbon black ratio, it was found that the duration of the setting was accelerated and the molding time was shortened. With an increase in carbon black ratio, the setting times decreased. In the electrically cured concrete, 30% increase in strength was observed at early days.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Concrete and Cement Materials Research · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. K.R. Backe, O.B. Backe, S.K. Lyomov, Characterizing curing cement slurries by electrical conductivity, SPE Drill. Complete 16: 201–207, 2001.10.2118/74694-PA ↗
2. Heat curing and post-heat curing regimes of high-performance concrete: influence on microstructure and CSH composition10.1016/0008-8846(95)00202-2 ↗
3. Effect of electrical curing application on setting time of concrete with different stress intensity10.1016/j.conbuildmat.2017.12.036 ↗
4. Effect of mix design inputs, curing and compressive strength on the durability of Na2SO4-activated high volume fly ash concretes10.1016/j.cemconcomp.2018.03.028 ↗
5. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗
6. Minimum curing time prediction of early-age concrete to prevent frost damage10.1016/j.conbuildmat.2010.09.021 ↗
7. T. Uygunoglu, B. Şimşek, E. Çınar, Effect of Carbon Black on Electrical Rapid Curing of Concrete, 2th International Conference on Engineering Technology and Innovation, ICETI 2018, 7-11 March, Hungary, Budapest, 2018.
8. ACI 306, 2002. Cold Weather Concreting, American Concrete Institute.
9. Electrical conductivity of setting cement paste with different mineral admixtures10.1016/j.conbuildmat.2011.08.068 ↗
10. Cement-matrix composites for thermal engineering10.1016/S1359-4311(01)00043-6 ↗
11. Electrical conductivity of setting cement paste with different mineral admixtures10.1016/j.conbuildmat.2011.08.068 ↗
12. G.O. Galao, L. Banon, F.J. Baeza, J. Carmona, P. Garces, Highly conductive carbon fiber reinforced concrete for icing prevention and curing, Materials, 2016.10.3390/ma9040281 ↗
13. A.O. Monteiro, P.B. Cachim, P.M.F.J. Costa, Electrical properties of cement-based composites containing carbon black particles, 5th International conference on Advanced Nano Materials, 193-199, 2015.10.1016/j.matpr.2015.04.021 ↗
14. Effect of powdered activated carbon on the air void characteristics of concrete containing fly ash10.1016/j.conbuildmat.2015.01.019 ↗
15. TS EN 197-1, 2012. Cement- Stage 1: General cements – component, TSE, Ankara Turkey.
16. ASTM D1765 – 18. Standard Classification System for Carbon Blacks Used in Rubber Products. Annual Book of ASTM Standards, Easton, MD, USA.
17. ASTM C 1202, 2018. Standard test methods for electrical indication of concrete’s ability to resist chloride lon penetration. Annual Book of ASTM Standards, Easton, MD, USA.
18. ASTM C191-08, 2008. Standard test methods for time of setting of hydraulic cement by Vicat needle, Annual Book of ASTM Standards, Easton, MD, USA.
19. ASTM, C403, 2008. Standard test method for time of setting of concrete mixtures by penetration resistance. Annual Book of ASTM Standards, Easton, MD, USA.
20. TS EN 12390-7, 2010. Testing hardened concrete - Part 7: Density of hardened concrete, TSE, Ankara.
21. TS EN 196-1, 2016. Methods of testing cement - Part 1: Determination of strength, TSE, Ankara.
22. Early hydration process of Portland cement paste by electrical measurement10.1061/(ASCE)0899-1561(2006)18:1(99) ↗
23. Examination of three methods for studying ion diffusion in cement pastes, mortars, and concrete10.1007/BF02472720 ↗
24. Determination of concrete setting time using electrical resistivity measurement10.1061/(ASCE)0899-1561(2007)19:5(423) ↗
25. Electrical properties of fluidified Portland cement mixes in the early stage of hydration10.1016/S0008-8846(00)00282-9 ↗