journal article·2020-08

Investigation of engineering properties of steel fiber reinforced concrete exposed to homogeneous magnetic field

Mohammad Hajforoush, Ali Kheyroddin, Omid Rezaifar

Publisher page

Abstract

Abstract The present study was performed to investigate the effect of applying homogeneous magnetic field (HMF) of density 0.5 Tesla (T) to steel fiber reinforced concrete (SFRC) specimens containing 1.5% volume of fiber on engineering properties. To achieve this goal, compressive and flexural strengths tests were employed to evaluate mechanical properties of the SFRC specimens at the age of 28 days. Furthermore, durability characteristic of the specimens was investigated for water absorption and permeable porosity tests. The non-destructive test based on ultrasonic pulse velocity (UPV) was used to assess the compressive strength of the specimens exposed to the HMF applied to either fresh or hardened states. In order to generate HMF, a magnetic device capable of causing the intended intensity was designed and manufactured. The concrete tests results indicated that the applying HMF to the SFRC specimens, during the casting process, increased their mechanical strength in the terms of compressive and flexural strengths to 18 and 16%, respectively. Also, flexural toughness of the specimens was enhanced by 7% compared to the specimen with no magnetic treatment. Due to the HMF exposure to the SFRC specimens, water absorption and permeable porosity values of the specimens decreased by 11 and 18%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Energy Technologies and Civil Engineering Innovations · Smart Materials for Construction · Electromagnetic Effects on Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres10.1016/j.conbuildmat.2019.08.006 ↗
2. Cyclic behaviour of steel ring filled with compressive plastic or concrete, installed in the concentric bracing system, Asian
3. Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing10.1016/j.conbuildmat.2019.07.110 ↗
4. Behaviour of different types of fibre reinforced concrete without admixture10.1016/j.engstruct.2016.01.041 ↗
5. Experimental characterization of the post-cracking response in hybrid steel/polypropylene fiber-reinforced concrete10.1016/j.conbuildmat.2016.08.068 ↗
6. In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test
7. Reinforcement effect and mechanism of carbon fibers to mechanical and electrically conductive properties of cement-based materials10.1016/j.conbuildmat.2016.08.063 ↗
8. Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks10.1016/j.conbuildmat.2016.08.111 ↗
9. Aligning steel fibers in cement mortar using electro-magnetic field10.1016/j.conbuildmat.2016.11.081 ↗
10. The construction method and directional dispersion of steel fiber reinforced concrete
11. A new type of steel fiber reinforced concrete
12. P.L. Rotondo, K.H. Weiner, Aligned steel fibers in concrete poles, Concr. Int. 8 (1986) 22–27.
13. Shahir Liew · 2019 · 215
14. Alignment of hooked-end fibres in matrices with similar rheological behaviour to cementitious composites through homogeneous magnetic fields10.1016/j.conbuildmat.2017.12.084 ↗
15. A model about dynamic parameters through magnetic fields during the alignment of steel fibres reinforcing cementitious composites10.1016/j.conbuildmat.2018.12.105 ↗
16. Effect of magnetic field treated water on mortar and concrete containing fly ash10.1016/S0958-9465(02)00098-7 ↗
17. Effect of magnetic water on the engineering properties of concrete containing granulated blast-furnace slag10.1016/S0008-8846(00)00215-5 ↗
18. An investigation on the fresh and hardened properties of self-compacting concrete incorporating magnetic water with various pozzolanic materials10.1016/j.conbuildmat.2017.09.135 ↗
19. Effects of simultaneous utilization of natural zeolite and magnetic water on engineering properties of self-compacting concrete10.1007/s42107-018-00106-w ↗
20. Effect of magnetized water on the mechanical and durability properties of concrete block pavers10.3390/ma11091647 ↗
21. Influence of magnetic water on early-age shrinkage cracking of concrete10.1016/j.conbuildmat.2017.04.140 ↗
22. Behavior of magnetic concrete incorporated with Egyptian nano alumina10.1016/j.conbuildmat.2017.06.022 ↗
23. Magnetized water effect on compressive strength and dosage of superplasticizers and water in self-compacting concrete10.1061/(ASCE)MT.1943-5533.0002174 ↗
24. Effect of magnetized water on foam stability and compressive strength of foam concrete10.1016/j.conbuildmat.2018.11.160 ↗
25. Using statistical analysis and laboratory testing to evaluate the effect of magnetized water on the stability of foaming agents and foam concrete10.1016/j.conbuildmat.2019.02.098 ↗
26. Influence of constant magnetic field on the properties of waste phosphogypsum and fly ash composites10.1016/j.conbuildmat.2015.04.029 ↗
27. J. J. Soto-Bernal, R. Gonzalez-Mota, I. Rosales-Candelas, J. A. Ortiz-Lozano, Effects of static magnetic fields on the physical, mechanical, and microstructural properties of cement pastes,Adv. Mater. Sci. Eng.2015.10.1155/2015/934195 ↗
28. Alternating magnetic field effect on fine-aggregate steel chip-reinforced concrete properties10.1061/(ASCE)MT.1943-5533.0002267 ↗
29. Inductive method for the orientation of steel fibers in recycled mortars10.1016/j.conbuildmat.2019.06.113 ↗
30. Alternating magnetic field effect on fine-aggregate concrete compressive strength10.1016/j.conbuildmat.2016.12.109 ↗
31. Magneto-electric control of scaled-down reinforced concrete beams10.14359/51689452 ↗
32. Magneto-electric active control of scaled-down reinforced concrete columns10.14359/51700790 ↗
33. Study of magnetically driven concrete10.1016/j.conbuildmat.2016.05.152 ↗
34. Orientation of steel fibers in magnetically driven concrete and mortar10.3390/ma11010170 ↗
35. ASTM C494, Standard Specification for Chemical Admixtures for Concrete, Annual Book of ASTM Standards, American Society for Testing and Materials, West Conshohocken, PA, USA, 2004.
36. Mechanical properties of high-strength steel fiber-reinforced concrete10.1016/j.conbuildmat.2004.04.027 ↗
37. ASTM C192, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken. PA, USA, 2018
38. A numerical approach to the complete stress-strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
39. J.D. Bapat Mineral admixtures in cement and concrete 2013 Taylor & Francis10.1201/b12673 ↗
40. ASTM C469, Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression, West Conshohocken 2002 PA, USA
41. ACI (American Concrete Institute), Building code requirements for structural concrete and commentary. ACI 318-14, Farmington Hills, MI, USA, 2014.
42. CEB-FIP, Diagnosis and assessment of concrete structures-state of the art report, CEB Bull, 192 (1989) 83–85.
43. ASTM C1609, Standard Test Method for Flexural Performance of Fiber Reinforced Concrete (using Beam with Third-point Loading), 2006.
44. High mechanical performance of fibre reinforced cementitious composites: the role of “casting-flow induced” fibre orientation10.1617/s11527-010-9613-9 ↗
45. Soniscope tests concrete structures
46. Bungey · 2006
47. Effect of mineral admixtures on the correlation between ultrasonic velocity and compressive strength for self-compacting concrete10.1134/S1061830908050100 ↗
48. ASTM C 642, Standard test method for density, absorption, and voids in hardened concrete, in: Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia. 4(2), 2002.
49. Water permeability of reinforced concrete with and without fiber subjected to static and constant tensile loading10.1016/j.cemconres.2012.03.014 ↗
50. Influence of fiber type and fiber orientation on cracking and permeability of reinforced concrete under tensile loading10.1016/j.cemconres.2017.01.004 ↗
51. Influence of fiber content and reinforcement ratio on the water permeability of reinforced concrete10.1617/s11527-014-0354-z ↗