journal article·2020-10

Engineering properties evaluation of unfired sludge bricks solidified by cement-fly ash-lime admixed nano-SiO2 under compaction forming technology

Lei Lang, Bing Chen, Yongjian Pan

Publisher page

Abstract

Abstract This paper investigated the engineering properties of unfired sludge bricks (USB) made from dredged sludge and cement-fly ash-lime admixed nano-SiO2 binders under compaction forming technology. A series of laboratory tests were conducted to evaluate the effects of cement content, mass ratio of lime to fly ash (L/FA) and nano-SiO2 (NS) content on the physical, mechanical and thermal insulation performance of USB. Furthermore, scanning electron microscopy (SEM) and X-ray diffraction (XRD) tests were also performed to explore the microstructural properties of USB. The results indicated that the binder composed of 15% cement, 1% lime, 9% fly ash and 1.5% NS was recommended to replace 25% cement for preparing USB, which can increase 7-, 28- and 60-day compressive strength by 1.37, 12.94 and 23.30%, respectively. The bulk density of USB increased with the increase of cement and NS content, but decreased with the L/FA. The water absorption of USB decreased with increasing cement and NS content, but increased with the L/FA. The lime content used in USB should be less than 3%. The pH of USB decreased with increasing NS content, and tended to be stable as the NS content increased to more than 1.5%. The increase of cement and NS content had adverse effect on the thermal insulation performance, but this can be effectively improved by the inclusion of lime and fly ash. A positive linear relationship was achieved between thermal conductivity and bulk density. The microstructure analysis confirmed that the CSH and CAH gels were the main cementitious products inside the USB, and the calcite (CaCO3) may be responsible for the micro-cracks appeared in USB.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Effectiveness of waste steel slag powder on the strength development and associated micro-mechanisms of cement-stabilized dredged sludge10.1016/j.conbuildmat.2019.117975 ↗
2. Valorization of stabilized river sediments in fired clay bricks: Factory scale experiment10.1016/j.jhazmat.2008.07.153 ↗
3. Marine dredged sediments as new materials resource for road construction10.1016/j.wasman.2007.03.027 ↗
4. Solidification/stabilization of dredged marine sediments for road construction10.1080/09593330.2011.633565 ↗
5. Strength properties and associated mechanisms of magnesium oxychloride cement-solidified urban river sludge10.1016/j.conbuildmat.2020.118933 ↗
6. 1-D compressibility behavior of cement-lime stabilized soft clays
7. Elevated curing temperature-associated strength and mechanisms of reactive MgO-activated industrial by-products solidified soils
8. Characterization of marine sediments for a reuse in land disposal and embankment10.1080/19648189.2011.9693316 ↗
9. Brick production with dredged harbor sediments: an industrial-scale experiment10.1016/S0956-053X(01)00048-4 ↗
10. Multiproperty characterization of cleaner and energy-efficient vegetal concrete based on one-part geopolymer binder10.1016/j.jclepro.2019.119916 ↗
11. Hydration characteristics of waste sludge ash that is reused in eco-cement clinkers10.1016/j.cemconres.2004.11.014 ↗
12. Utilization of the sludge derived from dyestuff-making wastewater coagulation for unfired bricks10.1016/j.conbuildmat.2010.10.012 ↗
13. Characteristics of the fired bricks with low-silicon iron tailings10.1016/j.conbuildmat.2014.07.075 ↗
14. Influence of tea waste concentration in the physical, mechanical and thermal properties of brick clay mixtures10.1016/j.conbuildmat.2019.05.114 ↗
15. Using slag for unfired-clay masonry-bricks
16. Experimental research on magnesium phosphate cements modified by red mud10.1016/j.conbuildmat.2019.117131 ↗
17. Engineering properties of unfired clay masonry bricks10.1016/j.enggeo.2009.05.002 ↗
18. Compressive strength and microstructural analysis of unfired clay masonry bricks10.1016/j.enggeo.2009.08.010 ↗
19. Design thermal values for unfired clay bricks10.1016/j.matdes.2009.07.011 ↗
20. Stabilised unfired clay bricks for environmental and sustainable use10.1016/j.clay.2012.01.011 ↗
21. Strength and environmental evaluation of stabilized Clay-PFA eco-friendly bricks10.1016/j.conbuildmat.2016.08.114 ↗
22. Estimated and real durability of unfired clay bricks: determining factors and representativeness of the laboratory tests10.1016/j.conbuildmat.2016.11.107 ↗
23. Magnesium oxide as alternative binder for unfired clay bricks manufacturing10.1016/j.clay.2017.05.034 ↗
24. Durability evolution and associated micro-mechanisms of carbonated reactive MgO-fly ash solidified sludge from East Lake, China10.1016/j.conbuildmat.2019.02.173 ↗
25. Carbonating magnesia for soil stabilization10.1139/cgj-2012-0364 ↗
26. Alkali-activated ground-granulated blast furnace slag for stabilization of marine soft clay10.1061/(ASCE)MT.1943-5533.0001100 ↗
27. Strength development of solidified dredged sludge containing humic acid with cement, lime and nano-SiO210.1016/j.conbuildmat.2019.116971 ↗
28. Utilization of low-quality desulfurized ash from semi-dry flue gas desulfurization by mixing with hemihydrate gypsum10.1016/j.fuel.2019.115783 ↗
29. Leakage behavior of toxic substances of naphthalene sulfonate-formaldehyde condensation from cement based materials10.1016/j.jenvman.2019.109934 ↗
30. Strength gain and microstructure of carbonated reactive MgO-fly ash solidified sludge from East Lake, China10.1016/j.enggeo.2019.02.012 ↗
31. Geotechnical characteristics of recycled crushed brick blends for pavement sub-base applications10.1139/t2012-041 ↗
32. Strength development in silty clay stabilized with calcium carbide residue and fly ash10.1016/j.sandf.2013.06.001 ↗
33. Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction10.1016/j.conbuildmat.2019.117195 ↗
34. Comparison between reactive MgO-and Na2SO4- activated low-calcium fly ash-solidified soils dredged from East Lake, China
35. Small-strain dynamic properties of silty clay stabilized by cement and fly ash10.1016/j.conbuildmat.2019.117646 ↗
36. CO2 carbonation-induced improvement in strength and microstructure of reactive MgO-CaO-fly ash-solidified soils10.1016/j.conbuildmat.2019.116914 ↗
37. Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators10.1016/j.jclepro.2019.03.290 ↗
38. Strength characteristics of class F fly ash modified with lime and gypsum10.1061/(ASCE)1090-0241(2007)133:7(757) ↗
39. An experimental investigation on strength properties of fly ash blended soils treated with cement
40. Stabilization/solidification of a municipal solid waste incineration residue using fly ash-based geopolymers10.1016/j.jhazmat.2010.08.127 ↗
41. Influence of nano-SiO2 on the Portland cement pastes10.1016/j.compositesb.2011.12.015 ↗
42. S. Y. Oderji, B. Chen, M. R. Ahmad, S. F. Ali Shah. Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators, Journal of Cleaner Production 225 (2019) 1-10, https://doi.org/10.1016/j.jclepro.2019.03.290.10.1016/j.jclepro.2019.03.290 ↗
43. Development of nanotechnology in high performance concrete
44. Modification of cement-based materials with nanoparticles10.1016/j.cemconcomp.2012.06.012 ↗
45. Stabilization of residual soil using SiO2 nanoparticles and cement10.1016/j.conbuildmat.2014.04.086 ↗
46. Ministry of Construction of the People’s Republic of China, Standard for Soil Test Method, GB/T50123-1999, 1999, China Planning Press. (in Chinese)
47. American Society of Testing and Material (ASTM), Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, ASTM D4318–10, West 2010 Conshohocken, PA.
48. American Society . Rock by Mass, ASTM D2216–10, West, of Testing and Material (ASTM), Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and 2010 Conshohocken, PA
49. American Society of Testing and Material (ASTM), Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort West (56,000 2012 Conshohocken, PA ft-lbf/ft3 (2,700
50. American Society of Testing and Material (ASTM), Standard Test Method for pH of Soils, ASTM D4972-13, 2013, West Conshohocken, PA.
51. Lime stabilization of clay minerals and soils10.1016/0013-7952(96)00028-2 ↗
52. Swelling-shrinkage properties and soil improvement of compacted expansive soil, Ning-Liang Highway, China10.1016/S0013-7952(98)00086-6 ↗
53. Effect of lime, cement and Sarooj (artificial pozzolan) on the sweeling potential of an expansive soil from Oman10.1016/j.buildenv.2004.08.028 ↗
54. A review on bricks and stabilized compressed earth blocks
55. Effect of the addition of coal-ash and cassava peels on the engineering properties of compressed earth blocks10.1016/j.conbuildmat.2012.04.056 ↗
56. Utilization of granulated blast furnace slag and cement in the manufacture of compressed stabilized earth blocks10.1016/j.conbuildmat.2018.01.125 ↗
57. Standardization Administration of China, Test methods for the concrete and brick, GB/T 4111-2013, 2013, China Standards Press. (in Chinese)
58. American Society of Testing and Material (ASTM), Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water, ASTM C20-00 (2005), 2005, West Conshohocken, PA.
59. American Society of Testing and Material (ASTM), Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale), ASTM C62, 2012, West Conshohocken, PA.
60. Standards and Testing Institution Tejgaon Industrial Area, Specification for Common Building Clay Bricks (Third Revision), BDS 208, 2009, Dhaka.
61. Bureau of Indian Standards, Common Burnt Clay Building Bricks Specification, IS 1007, 1992, New Delhi, India.
62. Department of Standards Malaysia, General Specification for Bricks, MS7.6:1972, 1972, Selangor, Malaysia.
63. Specification for Masonry Units-Part 1: Clay Masonary Units, TS EN 771-1, 2005, Ankara, Turkey.
64. Standardization Administration of China, Normal Concrete Small Block, GB/T 8239-2014, 2014, China Standard Press.
65. Development of nanotechnology in high performance concrete
66. Effects of nano-SiO2 and different ash particle sizes on sludge ash-cement mortar10.1016/j.jenvman.2007.03.036 ↗
67. Effects of colloidal nanoSiO2 on fly ash hydration10.1016/j.cemconcomp.2012.06.013 ↗
68. An investigation on use of paper mill sludge in brick manufacturing10.1016/j.conbuildmat.2017.05.087 ↗
69. Thermally efficient fired clay bricks incorporating waste marble sludge: an industrial-scale study10.1016/j.jclepro.2017.11.060 ↗
70. Sustainable utilization of deinking paper mill sludge for the manufacture of building bricks10.1016/j.jclepro.2018.09.028 ↗
71. Sustainable use of tannery sludge in brick manufacturing in Bangladesh10.1016/j.wasman.2016.12.041 ↗
72. Reduction of the calcium leaching rate of cement paste by addition of silica nanoparticles10.1016/j.cemconres.2008.03.021 ↗
73. The use of alkali activated waste binders in enhancing the mechanical properties and durability of soft alluvial soils10.1016/j.enggeo.2012.10.013 ↗
74. Measuring the engineering properties of marine clay treated with disposed granite waste10.1016/j.measurement.2018.08.053 ↗
75. Microstructure and mechanical properties of a metakaolinite-based geopolymer nanocomposite reinforced with carbon nanotubes10.1016/j.ceramint.2016.06.080 ↗
76. Effect of nano-SiO2 on the alkali-activated characteristics of spent catalyst metakaolin-based geopolymers10.1016/j.conbuildmat.2017.03.152 ↗