journal article·2020-11Open access

Effect of different vinyl-acetate contents in hybrid SBS-EVA modified bitumen

Ilya Binti Joohari, Filippo Giustozzi

Abstract

Abstract One of the most common polymers for bitumen modification and polymer-modified bitumen is Ethylene-vinyl acetate (EVA). Although of standard use, EVA can assume very different acceptations depending on the VA content within the copolymer matrix; low VA contents make EVA similar to a tough plastic while higher VA content makes it similar to a flexible rubber. The current study was conducted to evaluate the effect of vinyl acetate (VA) content on the performance of polymer-modified bitumen. In this study, base bitumen was modified with both styrene butadiene styrene (SBS) and EVA with 9%, 12%, 18%, and 24% VA content. A reference modified bitumen with SBS and low-density polyethene (LDPE) is also studied. Tensile strength tests were initially conducted on the single and hybrid polymers only, prior to bitumen addition. Differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and rheological tests were then carried out on the polymer-modified bitumen. The results from the thermal analysis concluded that the increase in vinyl acetate hinders the crystallization of the polymer, thus reducing the melting temperature and enthalpy. The rheological results showed that modifying bitumen with various EVA has allowed the formation of a rigid three-dimensional network when the polymers are dispersed within the bitumen thus improving the rheological behaviour primarily at low frequencies (high temperature).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Internal structure and linear viscoelastic properties of EVA/asphalt nanocomposites10.1016/j.eurpolymj.2009.12.024 ↗
2. Thermo-rheological behavior and compatibility of modified asphalt with various styrene–butadiene structures in SBS copolymers10.1016/j.matdes.2015.09.002 ↗
3. Rheological properties of SBS/CR-C composite modified asphalt binders in different aging conditions10.1016/j.conbuildmat.2019.04.076 ↗
4. Rheological studies of performance grade bitumens prepared by blending elastomeric SBS (styrene butadiene styrene) co-polymer in base bitumens10.1016/j.jiec.2016.08.017 ↗
5. Using waste polymers as a reliable alternative for asphalt binder modification – Performance and morphological assessment10.1016/j.conbuildmat.2018.11.279 ↗
6. Morphology, rheology, and physical properties of polymer-modified asphalt binders10.1016/j.eurpolymj.2018.10.049 ↗
7. Hybrid Polymerisation: An Exploratory Study of the Chemo-Mechanical and Rheological Properties of Hybrid-Modified Bitumen
8. Rheological studies of asphalt modified with elastomeric polymer10.1016/j.conbuildmat.2015.12.142 ↗
9. Impacts of multiple-polymer components on high temperature performance characteristics of airfield modified binders10.1016/j.conbuildmat.2016.12.156 ↗
10. Low-content crumb rubber modified bitumen for improving Australian local roads condition10.1016/j.jclepro.2020.122484 ↗
11. Recycled plastic as bitumen modifier: The role of recycled linear low-density polyethylene in the modification of physical, chemical and rheological properties of bitumen10.1016/j.jclepro.2020.121988 ↗
12. S. Fakirov, Amorphous State of Polymers, Fundamentals of Polymer Science for Engineers, Wiley-VCH2017.10.1002/9783527802180 ↗
13. Nanostructured Polymer Blends for Gas/Vapor Barrier and Dielectric Applications10.1016/B978-0-323-39408-6.00011-X ↗
14. A. Riley, Basics of polymer chemistry for packaging materials, Basics of polymer chemistry for packaging materials2012.10.1533/9780857095701.2.262 ↗
15. Study of transport of small molecules through ethylene-covinyl acetate copolymers films. Part A: Water molecules10.1016/S0142-9418(01)00078-2 ↗
16. Effect of the acetate group content on gas permeation through membranes based on poly(ethylene-co-vinyl acetate) and its blends10.1016/j.memsci.2013.04.057 ↗
17. Evaluation of the properties and microstructure of plastomeric polymer modified bitumens10.1016/j.fuproc.2009.08.007 ↗
18. Influence of thermo-oxidative aging on chemical composition and physical properties of polymer modified bitumens10.1016/j.conbuildmat.2011.06.033 ↗
19. Rheological characteristics of EVA modified bitumen and their correlations with bitumen concrete properties10.1016/j.conbuildmat.2013.07.032 ↗
20. Laboratory and in-situ tests for estimating improvements in asphalt concrete with the addition of an LDPE and EVA polymeric compound10.1016/j.conbuildmat.2018.11.152 ↗
21. Influence of aging on properties of polymer-modified asphalt10.1016/j.conbuildmat.2018.11.105 ↗
22. Effect of polymer modification on the ageing properties of asphalt binders: Chemical and morphological investigation10.1016/j.conbuildmat.2019.02.050 ↗
23. Correlation between phase separation and rheological behavior in bitumen/SBS/PE blends10.1039/C8RA08944B ↗
24. Polymer-modified bitumen of recycled LDPE and maleated bitumen10.1002/app.36810 ↗
25. Effect of chain structure on the properties of Glass fibre/polyethylene composites10.1016/j.matdes.2012.11.063 ↗
26. Polymer modification of bitumen: Advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
27. Glass transitions and amorphous phases in SBS–bitumen blends10.1016/j.tca.2005.02.017 ↗
28. Influence of polymer melting point and Melt Flow Index on the performance of ethylene-vinyl-acetate modified bitumen for reduced-temperature application10.1016/j.matdes.2016.02.003 ↗
29. Thermomechanical and microstructural evaluation of hybrid rubberised bitumen containing a thermoplastic polymer10.1016/j.conbuildmat.2017.09.126 ↗
30. Rheology and thermal stability of polymer modified bitumen with coexistence of amorphous phase and crystalline phase10.1016/j.conbuildmat.2018.05.073 ↗
31. Validation of ATR FT-IR to identify polymers of plastic marine debris, including those ingested by marine organisms10.1016/j.marpolbul.2017.12.061 ↗
32. Analytical characterization of polymers used in conservation and restoration by ATR-FTIR spectroscopy10.1007/s00216-009-3201-2 ↗
33. H. Lobo, J.V. Bonilla, Handbook of plastics analysis, Scitech Book News;.
34. TG/FTIR study of the thermal pyrolysis of EVA copolymers10.1016/j.jaap.2004.09.009 ↗
35. The prediction of bitumen properties based on FTIR and multivariate analysis methods10.1016/j.fuel.2017.07.048 ↗
36. Transitions in unmodified and modified bitumen using FTIR spectroscopy10.1617/s11527-018-1308-7 ↗
37. Ageing in modified bitumen using FTIR spectroscopy10.1080/10298436.2015.1007230 ↗
38. Investigation of rheological properties of light colored synthetic asphalt binders containing different polymer modifiers10.1016/j.conbuildmat.2017.11.098 ↗
39. Effects of ethylene vinyl acetate and nanoclay additions on high-temperature performance of asphalt binders10.1016/j.conbuildmat.2018.03.012 ↗
40. Use of black diagrams to identify inconsistencies in rheological data10.1080/14680629.2002.9689933 ↗
41. Viscoelastic phase separation and crystalline-to-amorphous phase transition in bitumen/SBS/PE blends10.1016/j.polymer.2018.09.042 ↗
42. Rheological evaluation of ethylene vinyl acetate polymer modified bitumens10.1016/S0950-0618(02)00103-4 ↗
43. A Comparative Study of the Influence of Shift Factor Equations on Master Curve Construction
44. Effect of storage stability on chemical and rheological properties of polymer-modified asphalt binders for road pavement construction10.1016/j.conbuildmat.2017.04.014 ↗
45. Rheological properties of styrene butadiene styrene polymer modified road bitumens⋆10.1016/S0016-2361(03)00146-7 ↗