journal article·2021-01

Analysis of the chemical properties and high-temperature rheological properties of MDI modified bio-asphalt

Linlong Shao, Hainian Wang, Ran Zhang, Wenhua Zheng, Nabil Hossiney, Chunying Wu

Publisher page

Abstract

Abstract As an environmentally friendly material, bio-oil is employed to partially replace non-renewable petroleum asphalt, but its addition weakens the high-temperature non-deformability of petroleum asphalt. Therefore, the 4,4′-diphenylmethane diisocyanate (MDI) was employed as a chemical modifier of bio-asphalt to improve its high temperature rheological properties. The MDI with addition of 0.5%, 1%, 2%, 4% by weight, and the bio-oil with addition of 12% were used to obtain the MDI modified bio-asphalts. The chemical reaction mechanism between the MDI and bio-asphalt was analyzed by employing the Fourier-transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) tests. Meanwhile, the rotational plate viscosity (RPV) test, the temperature sweep test, and the multiple stress creep and recovery (MSCR) test were employed to evaluate the high-temperature rheological properties of the MDI modified bio-asphalts. Moreover, the relationships between the chemical reaction mechanism and high-temperature rheological parameters of MDI modified bio-asphalt were established. Test results show that a nucleophilic addition reaction occurred between the MDI and the active hydrogen of bio-asphalt to form urethane chains, which increased the content of macromolecular polymers in the bio-asphalt. The MDI increased the G* / sin δ (rutting factor) and the E(η) (visco-flow activation energy) of the bio-asphalt, but decreased its permanent strain and Jnr (non-recoverable creep compliance). Therefore, the MDI modifier effectively enhanced the permanent non-deformability of the bio-asphalt. Both I Urethane and LMS were positively correlated with the rutting factor, viscosity and 1/Jnr, and had significant correlations at a significance level of 0.05. Furthermore, the optimal ratio of MDI to bio-oil was determined to be 1:6 by mass.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. A hybrid strategy in selecting diverse combinations of innovative sustainable materials for asphalt pavements10.1016/j.jtte.2016.02.001 ↗
2. Fabrication and application of polyurea formaldehyde-bioasphalt microcapsules as a secondary modifier for the preparation of high self-healing rate SBS modified asphalt10.1016/j.conbuildmat.2020.118452 ↗
3. Performance and optimization of castor beans-based bio-asphalt and European rock-asphalt modified asphalt binder10.1016/j.conbuildmat.2019.117951 ↗
4. Utilization of fractionated bio oil in asphalt
5. Antioxidant effect of bio-oil additive ESP on asphalt binder
6. Characterization and application of manure-based bio-binder in asphalt industry
7. Partial replacement of asphalt binder with bio-binder: characterisation and modification
8. Chemical characterization of biobinder from swine manure: sustainable modifier for asphalt binder10.1061/(ASCE)MT.1943-5533.0000237 ↗
9. Synthesis and characterization of biomodified rubber asphalt: sustainable waste management solution for scrap tire and swine manure10.1061/(ASCE)EE.1943-7870.0000765 ↗
10. Rheological behavior and sensitivity of wood-derived bio-oil modified asphalt binders
11. Chemical composition of bio-oils produced by fast pyrolysis of two energy crops10.1021/ef700776w ↗
12. High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests10.1016/j.conbuildmat.2014.11.063 ↗
13. Asphalt binders blended with a high percentage of biobinders: aging mechanism using FTIR and rheology10.1061/(ASCE)MT.1943-5533.0001117 ↗
14. Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphalt10.1016/j.conbuildmat.2016.10.010 ↗
15. High temperature performance of SBS modified bio-asphalt10.1016/j.conbuildmat.2017.03.103 ↗
16. Preparation and properties of soybean bio-asphalt/SBS modified petroleum asphalt10.1016/j.conbuildmat.2018.12.206 ↗
17. Chemical characteristics of bio-asphalt and its rheological properties after CR/SBS composite modification10.1016/j.conbuildmat.2018.12.092 ↗
18. Composite modification mechanism of blended bio-asphalt combining styrene-butadiene-styrene with crumb rubber: a sustainable and environmental-friendly solution for wastes10.1016/j.jclepro.2019.01.004 ↗
19. Effects of preparation process on performance of rubber modified asphalt
20. Evaluation of crumb rubber modification and short-term aging on the rutting performance of bioasphalt
21. Use of rheological compatibility criteria to study SBS modified asphalts10.1002/app.12764 ↗
22. Rheology and microstructure of MDI–PEG reactive prepolymer-modified bitumen
23. Rheological and chemical characterization of plasma-treated rubberized asphalt using customized extraction method10.1016/j.fuel.2019.116819 ↗
24. Rheology of asphalts modified with glycidylmethacrylate functionalized polymers10.1016/j.jcis.2004.08.043 ↗
25. The modification of bitumen with styrene–butadiene–styrene, ethylene vinyl acetate and varying the amount of reactive ethylene terpolymer
26. Influence of polyphosphoric acid (PPA) on properties of crumb rubber (CR) modified asphalt10.1016/j.conbuildmat.2019.117094 ↗
27. Interplay between wax and polyphosphoric acid and its effect on bitumen thermomechanical properties10.1016/j.conbuildmat.2020.118194 ↗
28. Performance of polyurethane modified asphalt and its mixtures10.1016/j.conbuildmat.2018.10.025 ↗
29. Novel stable MDI isocyanate-based bituminous foams10.1016/j.fuel.2010.10.002 ↗
30. Physico-chemistry control of the linear viscoelastic behaviour of bitumen/montmorillonite/MDI ternary composites: effect of the modification sequence10.1016/j.fuproc.2015.11.011 ↗
31. Effect of shear processing on the linear viscoelastic behaviour and microstructure of bitumen/montmorillonite/MDI ternary composites10.1016/j.jiec.2017.01.004 ↗
32. Influence of thermoplastic polyurethane and synthesized polyurethane additive in performance of asphalt pavements10.1016/j.conbuildmat.2018.01.093 ↗
33. Xu · 2011
34. Applications of Fourier transform infrared spectroscopy technologies on asphalt materials
35. Weng · 2010
36. Analysis of aging mechanism of SBS polymer modified asphalt based on Fourier transform infrared spectrum
37. Ageing in modified bitumen using FTIR spectroscopy10.1080/10298436.2015.1007230 ↗
38. C. He, Gel Permeation Chromatography (GPC) Operation Manual, in: S.o.C. Chemistry Intermediate Laboratory Instrument Room, Peking University, China (Ed.) 2010, p. 6.
39. Characterization of the interaction effect of crumb rubber modified binders using HP-GPC10.1061/(ASCE)0899-1561(2010)22:2(153) ↗
40. A practical shear rate on modified asphalt binders for optimum compaction temperature determination in asphalt mixture design10.1617/s11527-016-0938-x ↗
41. Rotating plate viscosity method——a new method for viscosity testing of SBS modified asphalt
42. Analysis of viscosity and composition properties for crumb rubber modified asphalt
43. AASHTO, Standard Method of Testing for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)(T 240-131), American Association of State Highway and Transportation Officials, 2013.
44. AASHTO, Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (T 315-12), American Association of State Highway and Transportation Officials, 2013.
45. AASHTO, Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR), T350, American Association of State Highway and Transportation Officials (AASHTO), 2018.
46. High-temperature index of modified asphalt based on repeated creep
47. Research on predicting the rutting of asphalt pavement based on a simplified burgers creep model
48. High temperature performance evaluation of asphalt based on MSCR test and Burgers Model
49. Use of isocyanate production waste in the preparation of improved waterproofing bitumen10.1002/app.12808 ↗
50. D.M. Segura, A.D. Nurse, A. McCourt, R. Phelps, A. Segura, Chapter 3 Chemistry of polyurethane adhesives and sealants, Handbook of Adhesives and Sealants 1 (2005).10.1016/S1874-5695(02)80004-5 ↗
51. Synthesis and characterization of bio-based polyurethane polymers10.3844/ajeassp.2018.1298.1309 ↗
52. Property characterization of asphalt binders and mixtures modified by different crumb rubbers
53. On the modeling of number and weight average molecular weight of polymers10.1016/j.cej.2017.06.131 ↗