journal article·2021-01Open access

A concurrent multiscale approach for modeling recycled aggregate concrete

Eduardo A. Rodrigues, Marcela Gimenes, Luís A.G. Bitencourt Jr., Osvaldo L. Manzoli

Abstract

Abstract The use of recycled concrete aggregates in new concrete is an alternative that can provide economical and environmental benefits. However, the influence of the inert particles on the mechanical behavior of concrete needs to be better understood. To provide a comprehensive simulator to predict the failure mechanism of this material taking into account its heterogeneity in mesoscale, a mesh fragmentation technique composed of interface solid finite elements equipped with a tensile damage model is employed. To minimize computational costs, a concurrent multiscale strategy based on the use of coupling finite elements to connect the macro and mesoscale regions is adopted. In mesoscale, the different phases of the recycled aggregate concrete (RAC) are explicitly represented, consisting of: (i) new mortar matrix; (ii) recycled aggregate composed of old matrix and crushed rock (natural aggregate); and (iii) interfacial transition zones in between all of them. For the regions where cracks are not expected, homogenized elastic parameters are assumed for the RAC. Three-point bending beams experimentally tested by Casuccio et al. [4] are numerically analyzed for concrete with compressive strength targets of 18, 37 and 48 MPa. These concrete beams were produced with coarse aggregates derived from natural crushed stone and another two coming from recycled concrete with high and normal strengths. The numerical results obtained show that the concurrent multiscale model is able to represent the tensile failure mechanism of the RAC, taking into account explicitly the effects of the recycled components on crack patterns and structural predictions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Experimental and micromechanical investigation on the mechanical and durability properties of recycled aggregates concrete10.1016/j.cemconres.2019.105900 ↗
2. Experimental analysis of properties of high performance recycled aggregate concrete10.1016/j.conbuildmat.2013.11.054 ↗
3. A coupling technique for non-matching finite element meshes10.1016/j.cma.2015.02.025 ↗
4. Failure mechanism of recycled aggregate concrete10.1016/j.conbuildmat.2007.03.032 ↗
5. Multi-scale modeling of fracture in concrete composites10.1016/j.compositesb.2012.10.021 ↗
6. The meso-level numerical experiment research of the mechanics properties of recycled concrete10.4304/jsw.7.9.1932-1940 ↗
7. The effect of the elastic modulus of the aggregate on the elastic modulus, creep and creep recovery of concrete10.1680/macr.1964.16.48.129 ↗
8. Fracture and failure of recycled aggregate concrete (RAC) – a review
9. Effect of recycled coarse aggregate on the new interfacial transition zone concrete10.1016/j.conbuildmat.2018.09.180 ↗
10. Properties of recycled aggregate concrete made with recycled aggregates with different amounts of old adhered mortars10.1016/j.matdes.2014.01.044 ↗
11. Application of recycled coarse aggregate by mixture to concrete construction10.1016/j.conbuildmat.2005.12.023 ↗
12. The ITZ microstructure, thickness and porosity in blended cementitious composite: Effects of curing age, water to binder ratio and aggregate content10.1016/j.compositesb.2013.12.021 ↗
13. Porosity of recycled concrete with substitution of recycled concrete aggregate: an experimental study10.1016/S0008-8846(02)00795-0 ↗
14. Fracture process zone characteristics and identification of the micro-fracture phases in recycled concrete10.1016/j.engfracmech.2017.07.004 ↗
15. 3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray computed tomography images using damage plasticity model10.1016/j.ijsolstr.2015.05.002 ↗
16. Understanding variability in recycled aggregate concrete mechanical properties through numerical simulation and statistical evaluation10.1016/j.conbuildmat.2018.05.158 ↗
17. Explicit representation of physical processes in concrete fracture10.1088/0022-3727/42/21/214002 ↗
18. Microstructural analysis of recycled concrete using x-ray microtomography10.1016/j.cemconres.2015.11.010 ↗
19. Numerical modelling of plastic-damage response and crack propagation in RAC under uniaxial loading10.1680/jmacr.17.00042 ↗
20. Multiscale domain decomposition analysis of quasi-brittle heterogeneous materials10.1002/nme.3286 ↗
21. On the effect of ITZ thickness in meso-scale models of concrete10.1016/j.conbuildmat.2020.119639 ↗
22. Recycled concrete as aggregate for structural concrete production10.3390/su2051204 ↗
23. Modeling of interfaces in two-dimensional problems using solid finite elements with high aspect ratio10.1016/j.compstruc.2011.12.001 ↗
24. On the use of finite elements with a high aspect ratio for modeling cracks in quasi-brittle materials10.1016/j.engfracmech.2015.12.026 ↗
25. Elastoplastic-damaged meso-scale modelling of concrete with recycled aggregates10.1016/j.compositesb.2017.12.018 ↗
26. Nanomechanical properties of interfacial transition zone in concrete
27. The aggregate-mortar interface10.1016/0008-8846(85)90084-5 ↗
28. On the discrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations10.1016/S0020-7683(00)00196-7 ↗
29. Strong discontinuities and continuum plasticity models: the strong discontinuity approach10.1016/S0749-6419(98)00073-4 ↗
30. An implicit/explicit integration scheme to increase computability of non-linear material and contact/friction problems10.1016/j.cma.2007.11.027 ↗
31. Continuum approach to material failure in strong discontinuity settings10.1016/j.cma.2003.07.013 ↗
32. Interfacial transition zone in concrete10.1016/1065-7355(95)90037-3 ↗
33. A modified implicit-explicit integration scheme: an application to elastoplasticity problems
34. 3D concurrent multiscale model for crack propagation in concrete10.1016/j.cma.2019.112813 ↗
35. 2D mesoscale model for concrete based on the use of interface element with a high aspect ratio10.1016/j.ijsolstr.2016.05.004 ↗
36. An adaptive concurrent multiscale model for concrete based on coupling finite elements10.1016/j.cma.2017.08.048 ↗
37. Modeling 3-D desiccation soil crack networks using a mesh fragmentation technique10.1016/j.compgeo.2014.06.009 ↗
38. The interfacial transition zone (itz) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
39. Use of recycled aggregate in concrete
40. Continuous and discontinuous modelling of fracture in concrete using FEM10.1007/978-3-642-28463-2 ↗
41. Mesoscopic study of concrete i: generation of random aggregate structure and finite element mesh10.1016/S0045-7949(98)00177-1 ↗
42. Weerheijm · 2013
43. Mesoscale models for concrete: Homogenisation and damage behaviour10.1016/j.finel.2005.11.008 ↗
44. Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete10.1016/j.cemconres.2013.05.004 ↗
45. An overview of study on recycled aggregate concrete in china (1996–2011)10.1016/j.conbuildmat.2011.12.074 ↗
46. Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation10.1016/j.cemconcomp.2013.01.006 ↗
47. Experimental study of the interfacial transition zone (ITZ) of model rock-filled concrete (RFC)10.1016/j.cemconcomp.2014.09.002 ↗
48. 3D numerical study on fracture process of concrete with different ITZ properties using X-ray computerized tomography10.1016/j.ijsolstr.2018.05.026 ↗