Carbon fiber reinforced geopolymer (FRG) mix design based on liquid film thickness
Source abstract
Abstract
Abstract Though featured by the improved durability and sustainability, wider application of geopolymer has been impeded largely by its intrinsic brittleness. Adding fibers to transform it into fiber reinforced geopolymer (FRG) to ameliorate the brittleness and improve the performance is a promising method that is yet to be explored further. In this study, plain and carbon FRG with varying water to binder ratios were developed, whereby various performance attributes were obtained and evaluated. The addition of carbon fibers showed negative effects on workability but positive effects on strengths and such influences were discussed based on strength-workability relations. Moreover, correlations revealed two governing factors of liquid film thickness (LFT) and fiber factor with which the workability was modelled. Lastly, tests results acquired from the literature and the present study were analysed to elucidate the ascendancy in fiber effectiveness for geopolymer compared to cement-based materials, suggesting some unreleased potentials of fiber technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
2. Composition and microstructure of alkali activated fly ash binder: Effect of the activator10.1016/j.cemconres.2005.03.003 ↗
3. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
4. Novel hybrid organic-geopolymer materials10.1016/j.clay.2012.11.001 ↗
5. Fracture properties of geopolymer paste and concrete10.1680/macr.2011.63.10.763 ↗
6. Fibre factors governing the fresh and hardened properties of steel FRC10.1016/j.conbuildmat.2018.08.047 ↗
7. Effect of rigid fibres on aggregate packing10.1016/j.conbuildmat.2019.07.072 ↗
8. A new method for pull out test of reinforcing bars in plain and fibre reinforced concrete10.1016/j.engstruct.2018.02.080 ↗
9. A new bond model for reinforcing bars in steel fibre reinforced concrete10.1016/j.cemconcomp.2019.103405 ↗
10. S. Samal, D. Reichmann, I. Petrikova, B. Marvalova, Low velocity impact on fiber reinforced geocomposites, Appl. Mech. Mater. 827 (2016) 145-148.10.4028/www.scientific.net/AMM.827.145 ↗
11. Direct tension behaviour of steel fibre reinforced concrete measured by a new test method10.1016/j.engstruct.2018.09.010 ↗
12. Effect of fiber inclination on crack bridging stress in brittle fiber reinforced brittle matrix composites10.1016/0022-5096(92)90018-W ↗
13. Mixture design of self-levelling ultra-high performance FRC10.1016/j.conbuildmat.2019.116761 ↗
14. Impact and post impact behavior of fabric reinforced geopolymer composite10.1016/j.conbuildmat.2016.09.145 ↗
15. Development of extrudable high strength fiber reinforced concrete incorporating nano calcium carbonate
16. Carbon fiber-reinforced cement-based composites for tensile strain sensing
17. Hybrid effects of steel fiber and carbon nanotube on self-sensing capability of ultra-high-performance concrete10.1016/j.conbuildmat.2018.07.071 ↗
18. Correlation of microstructure and mechanical properties of various fabric reinforced geo-polymer composites after exposure to elevated temperature10.1016/j.ceramint.2015.06.029 ↗
19. Improved mechanical properties of various fabric-reinforced geocomposite at elevated temperature10.1007/s11837-015-1420-x ↗
20. Investigation of the internal structure of fiber reinforced geopolymer composite under mechanical impact: A micro computed tomography (µCT) study10.3390/app9030516 ↗
21. Packing density of cementitious materials: part 1 - measurement using a wet packing method10.1617/s11527-007-9274-5 ↗
22. Packing density of cementitious materials: part 2—packing and flow of OPC + PFA + CSF10.1617/s11527-007-9281-6 ↗
23. Roles of water film thickness and fibre factor in workability of polypropylene fibre reinforced mortar10.1016/j.cemconcomp.2018.07.014 ↗
24. Fillers to improve passing ability of concrete10.1002/suco.201800047 ↗
25. Effect of paste volume on fresh and hardened properties of concrete10.1016/j.conbuildmat.2019.05.131 ↗
26. Dilatancy mitigation of cement powder paste by pozzolanic and inert fillers10.1002/suco.201900320 ↗
27. Ternary blending with metakaolin and silica fume to improve packing density and performance of binder paste10.1016/j.conbuildmat.2020.119031 ↗
28. Bond strength of reinforcing steel embedded in fly ash-based geopolymer concrete10.1617/s11527-010-9683-8 ↗
29. Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites10.1016/j.compscitech.2015.11.009 ↗
30. Geopolymer matrix for fibre reinforced composites aimed at strengthening masonry structures10.1016/j.conbuildmat.2017.03.017 ↗
31. On the mechanical performance of K-and Na-based strain-hardening geopolymer composites (SHGC) reinforced with PVA fibers
32. Workability and mechanical properties of alkali activated slag concrete10.1016/S0008-8846(98)00236-1 ↗
33. Influence of the alkaline solution and temperature on the rheology and reactivity of alkali-activated fly ash pastes10.1016/j.cemconcomp.2018.08.010 ↗
34. Hong Kong SAR Government, Construction Standard CS1: 2010: Testing Concrete, Volume 1 of 2, Hong Kong, China 2010.
35. Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures10.1016/j.conbuildmat.2015.09.002 ↗
36. Flaw characterization and correlation with cracking strength in Engineered Cementitious Composites (ECC)10.1016/j.cemconres.2018.02.024 ↗
37. British Standards Institution · 2010
38. British Standards Institution · 2009
39. British Standards Institution · 2009
40. Y. Wang, Z. Zhang, J. Yu, J. Xiao, Q. Xu, Using Green Supplementary Materials to Achieve More Ductile ECC, Materials (Basel) 12(6) (2019) 858.10.3390/ma12060858 ↗
41. A mathematical model for the prediction of cement strength10.1016/0008-8846(94)00106-9 ↗
42. Strength and crack resistance of carbon microfiber reinforced concrete
43. Greener engineered cementitious composite (ECC) – The use of pozzolanic fillers and unoiled PVA fibers10.1016/j.conbuildmat.2020.118211 ↗
44. Effect of inclusion of steel fibres on the properties of geopolymer concrete composites
45. Flexural strength of plain and fibre-reinforced boroaluminosilicate geopolymer10.1016/j.conbuildmat.2014.12.002 ↗
46. Tensile properties of a novel fibre reinforced geopolymer composite with enhanced strain hardening characteristics10.1016/j.compstruct.2017.01.085 ↗
47. Flexural performance and toughness of hybrid steel and polypropylene fibre reinforced geopolymer10.1016/j.conbuildmat.2017.11.122 ↗
48. Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete10.1016/j.conbuildmat.2018.02.164 ↗
49. Effects of fibre content on mechanical properties and fracture behaviour of short carbon fibre reinforced geopolymer matrix composites10.1007/s12034-009-0011-2 ↗
50. Novel fiber-reinforced composite materials based on sustainable geopolymer matrix10.1016/j.proeng.2011.11.2120 ↗
51. Mechanical properties of alkali activated blast furnace slag pastes reinforced with carbon fibers10.1016/j.conbuildmat.2016.04.066 ↗
52. Electrical conductivity and compressive strength of carbon fiber reinforced fly ash geopolymeric composites10.1016/j.conbuildmat.2016.12.198 ↗
53. Experimental study of carbon fiber reinforced alkali-activated slag composites with micro-encapsulated PCM for energy storage10.1016/j.conbuildmat.2017.11.075 ↗
54. Behaviour of carbon and basalt fibres reinforced fly ash geopolymer at elevated temperatures10.1186/s40069-018-0267-2 ↗
55. Experimental evaluation of mechanical properties and fracture behavior of carbon fiber reinforced high strength concrete10.3311/PPci.8509 ↗
56. Effect of pore size distribution on drying shrinking of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
57. Provis · 2013
58. Performance of an alkali-activated slag concrete reinforced with steel fibers10.1016/j.conbuildmat.2007.10.027 ↗
59. Understanding the roles of activators towards setting and hardening control of alkali-activated slag cement10.1016/j.compositesb.2019.04.024 ↗
60. Effect of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars10.1016/j.cemconres.2018.07.005 ↗
61. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
62. New structural model of hydrous sodium aluminosilicate gels and the role of charge-balancing extra-framework Al10.1021/acs.jpcc.8b00259 ↗
63. Evaluation of morphology and size of cracks of the Interfacial Transition Zone (ITZ) in concrete containing fly ash (FA)10.1016/j.jhazmat.2018.06.016 ↗