Self-luminescent cement-based composite materials: properties and mechanisms
Source abstract
Abstract
Abstract Self-luminescent cement-based composite materials (SLCCM) have been considered as an innovatively functional civil engineering material for environmental protection pavement and smart pavement. In this study, luminescent cement-based composite materials (LCCM) were prepared by doping luminescent powder (LP) and reflective powder (RP) into cement-based materials. The mechanical properties and luminous properties, as well as the luminescence mechanism, were evaluated. The results indicate that the incensement of RP mesh improved the mechanical strength of the LCCM specimen, while the mechanical strengths, brightness and afterglow time of the LCCM first increase and then decrease with an increase in the mesh of the LP. The LP and RP reacted with cement hydration products to produce abundant C-S-H. However, when the particle size was too small, SrAl2O4 could hydrolyzes to produce SrAl4O7, furthermore, a large amount of aluminum ions in the LP are free, which accelerates the hydration reaction of Ca(OH)2 to produce C-S-H and AFt crystals. The self-hydration of LP and the coverage of hydration products make the luminescent properties of LCCM with fine particles decrease, while the coarse particles have the lowest luminescent properties due to the limited effective luminescent area in cement. The optimum excitation spectrum of the LCCM is found in the range between 350 and 450 nm, and the emission spectrum is yellowish–green with a peak value of 510–520 nm. The comprehensive evaluation results of LCCM show great feasibility of its utilization in road pavement, which is help to save energy, reduce ecological light pollution and improve the safety of road traffic in low lighting environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Building materials and conservation · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Critical analysis of the energy performance indicators for road lighting systems in historical towns of central Italy10.1016/j.energy.2017.07.093 ↗
2. The effects of dimmable road lighting: a comparison of measured and perceived visibility10.1016/j.trf.2016.10.012 ↗
3. Impact of urban street lighting on road users’ perception of public space and mobility behavior10.1016/j.buildenv.2019.03.009 ↗
4. The impact of lighting on drivers well-being and safety in very long underground roads: New challenges for new infrastructures10.1016/j.tust.2018.06.005 ↗
5. C. Boomsma, L.J.E. Steg, Behavior, feeling safe in the dark examining the effect of entrapment, lighting levels, and gender on feelings of safety and lighting policy acceptability, 46(2) (2014) 193–212.10.1177/0013916512453838 ↗
6. IoT for energy efficient green highway lighting systems: Challenges and issues
7. A study on the implementation of dimmable street lighting according to vehicle traffic density10.1016/j.ijleo.2018.12.183 ↗
8. Safety evaluation of the lighting at the entrance of a very long road tunnel: a case study in Ilam, Saf Health
9. A review of mitigation measures for reducing wildlife mortality on roadways10.1016/j.landurbplan.2008.11.001 ↗
10. T. Longcore, C.J.F.i.E. Rich, t. Environment, Ecological light pollution, 2(4) (2004) 191–19810.1890/1540-9295(2004)002[0191:ELP]2.0.CO;2 ↗
11. Natural rubber filled with phosphorescent materials for pavement
12. Assessing performance of glow-in-the-dark concrete10.3141/2508-04 ↗
13. W.J. van der Merwe Steyn, Development of autoluminescent surfacings for concrete pavements, Transp. Res. Record: J. Transp. Res. Board 2070(1) (2008) 22–31.10.3141/2070-04 ↗
14. B. Han, L. Zhang, J. Ou, Light-Emitting Concrete, Smart and multifunctional concrete toward sustainable infrastructures, 2017, pp. 285–297.10.1007/978-981-10-4349-9_16 ↗
15. B. Carreño, Glow-Hard: Luminous Cement Could Light Roads, Structures, 2016
16. Dark, heat-reflective, anti-ice rain and superhydrophobic cement concrete surfaces10.1016/j.conbuildmat.2019.05.188 ↗
17. Enhancement of green long lasting phosphorescence in CaSnO3:Tb3+ by addition of alkali ions10.1016/j.physb.2012.12.013 ↗
18. Investigation of the trap state of Sr2MgSi2O7: Eu2+, Dy3+ phosphor and decay process10.1016/j.radmeas.2011.04.023 ↗
19. Long afterglow properties of Eu2+/Mn2+ doped Zn2GeO410.1016/j.jlumin.2013.09.011 ↗
20. Characteristics analysis of self-luminescent cement-based composite materials with self-cleaning effect
21. Effect of water resistant SiO2 coated SrAl2O4: Eu2+ Dy3+ persistent luminescence phosphor on the properties of Portland cement pastes10.1016/j.conbuildmat.2019.116823 ↗
22. A life-time reproducible mechano-luminescent paint for the visualization of crack propagation mechanisms in concrete structures10.1016/j.ijfatigue.2017.03.011 ↗
23. R. Bacero, D. To, J.P. Arista, M.K.D. Cruz, J.P. Villaneva, F.A.A.J.J.o.t.E.A.S.f.T.S. Uy, Evaluation of Strontium Aluminate in Traffic Paint Pavement Markings for Rural and Unilluminated Roads, 11 (2015) 1726–1744
24. M. Barletta, G. Rubino, V. Tagliaferri, S.J.C. Vesco, S.A. Physicochemical, E. Aspects, Design and manufacture of photoluminescent coatings on stainless steel substrates, 455(1) (2014) 147–155.10.1016/j.colsurfa.2014.04.044 ↗
25. Photoluminescent Road Coatings for Open-Graded and Dense-Graded Asphalts: Theoretical and Experimental Investigation10.1061/(ASCE)MT.1943-5533.0002361 ↗
26. Triboluminescence for distributed damage assessment in cement-based materials10.1177/1045389X13484100 ↗
27. Study on properties and mechanisms of luminescent cement-based pavement materials with super-hydrophobic function10.1016/j.conbuildmat.2017.12.231 ↗
28. E. Sakai, S. Miyahara, S. Ohsawa, S.-H. Lee, M.J.C. Daimon, C. Research, Hydration of fly ash cement, 35(6) (2005) 1135–1140.10.1016/j.cemconres.2004.09.008 ↗
29. The effect and mechanism of La2O3 on the anti-ultraviolet aging characteristics of virgin bitumen10.1016/j.conbuildmat.2019.116967 ↗
30. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
31. D.P. Bentz, E.J. Garboczi, C.J. Haecker, O.M.J.C. Jensen, C. Research, Effects of cement particle size distribution on performance properties of Portland cement-based materials, 29(10) (1999) 1663–167110.1016/S0008-8846(99)00163-5 ↗
32. L. Lin, W.C. Chang, D.F. Lin, H.L. Luo, M.C. Tsai, Effects of nano-SiO(2) and different ash particle sizes on sludge ash-cement mortar, J. Environ. Manage. 88(4) (2008) 708-1410.1016/j.jenvman.2007.03.036 ↗
33. Improved water resistance of SrAl2O4: Eu2+, Dy3+ phosphor directly achieved in a water-containing medium10.1016/j.solidstatesciences.2017.01.006 ↗
34. Insights into the element gradient in the grain and luminescence mechanism of the long afterglow material Sr2MgSi2O7: Eu2+, Dy3+10.1016/j.jallcom.2018.11.163 ↗
35. Luminescence decay evaluation of long-afterglow phosphors10.1016/j.physb.2014.04.080 ↗
36. Long lasting phosphors: SrAl2O4:Eu10.1016/j.rser.2017.06.081 ↗
37. D. Sharma, S.J.J.o.C.P. Goyal, Accelerated carbonation curing of cement mortars containing cement kiln dust: an effective way of CO2 sequestration and carbon footprint reduction, 192 (2018) 844–854.10.1016/j.jclepro.2018.05.027 ↗
38. Synthesis, structure, and color-tunable luminescence properties of lanthanide activator ions doped bismuth silicate as single-phase white light emitting phosphors10.1016/j.jallcom.2019.152546 ↗