Chloride diffusion behavior of coral aggregate concrete under drying-wetting cycles
Source abstract
Abstract
Abstract This study investigated the chloride diffusion behavior of coral aggregate concrete (CAC) under drying-wetting cycles. The influences of the aggregate type, strength grade, fly ash (FA) content, and basalt fiber (BF) content on the free chloride concentration in the concrete were determined. The apparent chloride diffusion coefficient (Dapp) of the CAC was calculated, and then used to analyze the instantaneous chloride diffusion coefficient (Dins) of the CAC. The test results showed that the free chloride concentration of the CAC was higher than that of ordinary aggregate concrete (OAC), with a smaller free chloride concentration for a higher strength grade. The Dapp and Dins first increased and then decreased with increases in the FA content and BF content. The Dins was 65 ~ 87% smaller than the Dapp. The time attenuation coefficient of the chloride diffusion coefficient had good positive correlations with the strength grade and FA content, and a good quadratic functional relationship with the BF content. The peak chloride concentration appeared at approximately 4 mm inside the concrete, and increased with the erosion time, which conformed to the power function law. In addition, a calculation model for the apparent chloride diffusion coefficient was established. The porosity of CAC can be effectively reduced when the FA content is 30% or the BF content is 0.1%, in addition, the chloride diffusion coefficient is positively correlated with the porosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A feasibility study of application of coral reef sand concrete
2. The research of materials on compressive strength of coral concrete
3. Mix design and characteristics evaluation of an eco-friendly Ultra-High Performance Concrete incorporating recycled coral based materials10.1016/j.jclepro.2017.07.096 ↗
4. Research of coral aggregate concrete on mechanical property and durability
5. Effect of fly ash, blast furnace, slag and metakaolin on mechanical properties and durability of coral sand concrete10.1016/j.clay.2017.02.026 ↗
6. Engineering properties of coral sands in Nansha islands
7. Study of compressive strength characteristics of coral aggregate concrete10.1680/macr.1996.48.176.141 ↗
8. Experiment on chloride diffusion coefficient of coral concrete exposed to marine environment
9. R Effects of silica fume and blast furnace slag on the mechanical properties and chloride ion distribution of coral aggregate10.1016/j.conbuildmat.2019.04.149 ↗
10. Study on applications of concretes from coral reef sand mixed with seawater for patching-up in reef engineering
11. Coral concrete at bikini atoll
12. Y. Wanchai, O. Nobuaki, N. Takahiro, Y. Hiroyuki, Study on strength and durability of concrete using low quality coarse aggregate from circum-Pacific region, Fourth Regional Symposium on Infrastructure Development in Civil Engineering (RSID4), 2003.10.2208/jscej.2003.746_103 ↗
13. Research on chloride diffusion and flexural behavior of beams strengthened with TRC subjected to dry-wet cycles
14. Y.P. Tian, P. Zhang, K.Y. Zhao, Z.X. Du, T.J. Zhao, Application of Ag/AgCl sensor for chloride monitoring of mortar under dry-wet cycles, Sensors. 20 (2020) 1394-1408.10.3390/s20051394 ↗
15. Developing a model for chloride ions transport in cement concrete under dynamic flexural loading and dry-wet cycles10.1155/2017/5760512 ↗
16. Experimental and numerical study on chloride transport in cement mortar during drying process10.1016/j.conbuildmat.2020.119655 ↗
17. Utilization of fly ash concrete in marine environment for long term design life analysis10.1016/j.matdes.2009.09.024 ↗
18. The use of bulk diffusion tests to establish time-dependent concrete chloride diffusion coefficients10.1016/S0008-8846(02)00925-0 ↗
19. Frederiksen · 2008
20. Instantaneous chloride diffusion coefficient and its time dependency of concrete exposed to a marine tidal environment10.1016/j.conbuildmat.2018.01.107 ↗
21. Time dependency and similarity of decay process of chloride diffusion in concrete under simulated marine tidal enviroment10.1016/j.conbuildmat.2019.02.016 ↗
22. Chloride diffusion of shotcrete lining structure subjected to nitric acid, salt–frost degradation, and bending stress in marine environment
23. Mercury porosimetry: an inappropriate method for the measurement of pore size distributions in cement-based materials10.1016/S0008-8846(00)00370-7 ↗
24. Effect of hydration kinetics on properties of compositionally similar binders10.1016/j.cemconres.2017.08.005 ↗
25. Influences of water-to-cement ratio and curing condition on water absorption of internal curing concrete
26. Study on chloride transport performance of eco-friendly coral aggregate concrete in marine environment10.1016/j.conbuildmat.2020.120272 ↗
27. Experimental study on chloride diffusion properties of concrete in freeze-thaw environment
28. Investigation of steel and polymer fiber-reinforced self-consolidating concrete
29. A semi-closed-form solution for chloride diffusion in concrete with time-varying parameters10.1680/macr.2004.56.6.359 ↗
30. Prediction of time dependent chloride transport in concrete structures exposed to a marine environment10.1016/j.cemconres.2009.09.023 ↗
31. Investigation of computational model for surface chloride concentration of concrete in marine atmosphere zone10.1016/j.oceaneng.2017.04.024 ↗
32. Service life and global warming potential of chloride exposed concrete with high volumes of fly ash10.1016/j.cemconcomp.2017.03.020 ↗
33. Water absorption and electrical resistivity of concrete with recycled concrete aggregates and fly ash10.1016/j.cemconcomp.2018.10.004 ↗
34. Influence of admixture on attenuation of concrete chlorine diffusivity in the natural tidal range environment