journal article·2021-02

Mechanical properties of fiber and nano-Al2O3 reinforced magnesium phosphate cement composite

Hu Feng, Shihao Shen, Yuyang Pang, Danying Gao, Zhenyu Wang, M.Neaz Sheikh

Publisher page

Abstract

Abstract In this paper, the mechanical properties of magnesium phosphate cement (MPC) was enhanced by adding fiber and nano-Al2O3. The effects of fiber and nano-Al2O3 on the workability, compressive strength and flexural toughness of MPC were studied. The variables of the experimental investigation included the types of fiber, fiber volume fraction, nano-Al2O3 substitution rate and curing time. The experimental results showed that the workability and the mechanical properties of the MPC could be improved by adding nano-Al2O3. The workability decreased gradually with increasing fiber content, while the compressive and tensile strength gradually increased. Among different types of fiber, the micro-steel fiber (MSF) had the most significant effect on the improvement of flexural toughness. Based on the analysis of experimental data, empirical formulae for predicting the compressive strength and splitting tensile strength of fiber and nano-Al2O3 reinforced MPC composite (FNRMC) were proposed. In addition, the modification mechanisms of nano-Al2O3 on the MPC were revealed by XRD and SEM for microscopic phase tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Electromagnetic wave absorption materials · Multiferroics and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Research progresses on durability of magnesium phosphate cement based materials
2. Chemically bonded phosphate ceramics for stabilization and solidification of mixed waste
3. Research progresses on magnesium phosphate cement: a review10.1016/j.conbuildmat.2019.03.304 ↗
4. Magnesia-based cements: a journey of 150 Years, and cements for the future10.1021/acs.chemrev.5b00463 ↗
5. Development of a new biocomposite for building insulation and structural purpose using corn stalk and magnesium phosphate cement10.1016/j.enbuild.2018.06.007 ↗
6. Magnesium phosphate cements formulated with low grade magnesium oxide incorporating phase change materials for thermal energy storage10.1016/j.conbuildmat.2017.07.227 ↗
7. Effect of silica fume and basalt fiber on the mechanical properties and microstructure of magnesium phosphate cement (MPC) mortar10.1016/j.conbuildmat.2018.09.143 ↗
8. Microstructure of magnesium potassium phosphate cement10.1016/j.conbuildmat.2010.12.035 ↗
9. Experimental research on magnesium phosphate cements containing alumina10.1016/j.conbuildmat.2016.06.010 ↗
10. Cementing mechanism of potassium phosphate based magnesium phosphate cement10.1016/j.ceramint.2012.04.083 ↗
11. Experimental study of magnesium phosphate cements modified by metakaolin10.1016/j.conbuildmat.2016.07.092 ↗
12. Magnesium ammonium phosphate formation, recovery and its application as valuable resources: a review10.1002/jctb.3936 ↗
13. Optimizing the dimensions of magnesium ammonium phosphate to maximize its ammonia uptake ability10.1016/j.apt.2012.10.001 ↗
14. Effect of heavy metals and water content on the strength of magnesium phosphate cements10.1016/j.jhazmat.2009.04.091 ↗
15. The revolutionary creation of new advanced materials-carbon nanotube composites10.1016/S1359-8368(02)00012-4 ↗
16. Microstructure of cement mortar with nano-particles10.1016/S1359-8368(03)00052-0 ↗
17. Yan · 2018
18. A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials10.1016/j.cemconres.2003.08.025 ↗
19. Investigations on the preparation and mechanical properties of the nano-alumina reinforced cement composite10.1016/j.matlet.2005.08.061 ↗
20. The Effect of Nano-SiO2, Nano-Al2O3, and Nano-Fe2O3 on the compressive strength and workability of magnesium phosphate cement-based mortar10.1520/ACEM20190014 ↗
21. Zhao · 2017
22. Mechanical behavior of micro-fine steel fiber reinforced sulphoaluminate cement composite10.1016/j.conbuildmat.2018.03.065 ↗
23. Feng · 2018
24. Tensile strength of concrete affected by uniformly distributed and closely spaced short lengths of wire reinforcement
25. Compressive strength of steel fiber reinforced high-strength concrete
26. The compressive strength of steel fiber concrete
27. Experimental study on the strength of steel fiber and nano-silica reinforced concrete
28. Compressive strength and splitting tensile strength of steel fiber reinforced ultra high strength concrete (SFRC)10.4028/www.scientific.net/AMM.34-35.1441 ↗
29. Finite element modeling of compressive and splitting tensile behavior of plain concrete and steel fiber reinforced concrete cylinder specimens
30. Effect of graphene oxide nanosheets of microstructure and mechanical properties of cement composites10.1016/j.conbuildmat.2013.08.022 ↗
31. Size effect of steel fiber reinforced concrete without web reinforcement under shear
32. Shear strength of steel fiber-reinforced concrete
33. Influence of fiber volume fraction and aggregate size on flexural behavior of high strength steel fiber-reinforced concrete (SFRC)10.4028/www.scientific.net/AMM.372.223 ↗
34. The influence of fibers with different geometrical dimensions on the mechanical properties of concrete
35. Flexural performance evaluation of SFRC with design strength of 60 MPa10.9711/KTAJ.2013.15.3.175 ↗
36. Efect of nano-alumina on quasi-static and dynamic properties of concrete
37. Huanai Magnesium Industry Co., Ltd. of Jiangsu, China. https://honormg.1688.com/ (Accessed on December 2019) (in Chinese).
38. Ronghong chemical Co., Ltd. of Liaoning, China. http://www.ampcn.com/show/index.asp? id=258616/ (Accessed on December 2019) (in Chinese).
39. Chenling chemical Co., Ltd. of Liaoning, China. https://www.11467.com/wuxi/co/217134. htm (Accessed on December 2019) (in Chinese).
40. Banda Technology Co., Ltd. of Liaoning, China. http://www.lnpdkj.com/ (Accessed on December 2019) (in Chinese).
41. ASTMC143/C143M-15a. Standard Test Method for Slump of Hydraulic-Cement Concrete[S]. West Conshohocken: ASTM International, 1985.
42. CS (Chinese Standard) GB/T50080-2011, Standard for Test Method of Performance on Ordinary Fresh Concrete (in Chinese).
43. CS (Chinese Standard) GB/T50081-2002, Standard for Test Method of Mechanical Properties on Ordinary Concrete (in Chinese).
44. ASTM /C1609M-12, Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading), ASTM International, West Conshohocken, PA, 2012.
45. Advances in research on flowability and rheological properties of fiber reinforced cementitious composites
46. Cementing mechanism of potassium phosphate based magnesium phosphate cement10.1016/j.ceramint.2012.04.083 ↗