journal article·2021-03

Effect of crumb rubber percentages and bitumen sources on high-temperature rheological properties of less smell crumb rubber modified bitumen

Haihui Duan, Chongzheng Zhu, Yanqi Li, Henglong Zhang, Shuai Zhang, Feipeng Xiao, Serji Amirkhanian

Publisher page

Abstract

Abstract The smell generated by crumb rubber modified bitumen (CRMB) is unfavorable or offensive, leading to many complaints from people involved. Therefore, a new crumb rubber (CR) product with less smell has been developed. The study aims at investigating the influence of the new CR on high-temperature rheological properties of the CRMB derived from different bitumen sources. Besides, the effect degrees of the bitumen source and the new CR percentage on its rheological properties was compared with analysis of variance (ANOVA) method. The rheological properties tests were conducted on three base binders (Inman, Nustar and Kuwait) and the CRMB with less smell CR before and after rolling thin film oven test by Brookfield Viscometer and dynamic shear rheometer (DSR). The results show that similar to common CRs, the addition of the new CR can increase viscosity of the CRMB and improve high-temperature rheological properties of bitumen binders. CRMB exhibits a different viscoelastic behavior from the styrene-butadienestyrene block copolymer (SBS) modified bitumen, and the former has a wider linear region than the latter. But an increasing CR percentage leads to a narrower linear viscoelastic region for the CRMB. In case of the improvement of high-temperature rheological properties of bitumen binders, it is not only related to the CR percentages but bitumen source. Finally, ANOVA results indicate that bitumen source has a greater contribution than CR percentage to the high-temperature rheological properties of CRMB. On the basis of the results discussed, the CRMB produced from Nustar and with 15% new CR is recommended.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Polymer modified bitumen binders10.1016/j.conbuildmat.2005.07.007 ↗
2. Recycled tyre rubber modified bitumen for road bitumen mixtures: a literature review10.1016/j.conbuildmat.2013.09.007 ↗
3. Physical, rheological and chemical characterization of aging behaviors of thermochromic asphalt binder10.1016/j.fuel.2017.09.111 ↗
4. The performance of hot-recycling bitumen binder containing crumb rubber modified bitumen based on physiochemical and rheological measurements10.1016/j.conbuildmat.2019.07.253 ↗
5. Effect of warm mix agent on physical and aging properties of crumb rubber modified bitumen10.4028/www.scientific.net/MSF.944.1226 ↗
6. Characteristics of waste tire rubber (WTR) and amorphous poly alpha olefin (APAO) compound modified porous asphalt mixtures10.1016/j.conbuildmat.2020.119071 ↗
7. Low temperature and fatigue characteristics of treated crumb rubber modified bitumen after a long term aging procedure10.1016/j.jclepro.2019.06.147 ↗
8. Effect of liquid anti-stripping agents on moisture sensitivity of crumb rubber modified bitumen binders and mixtures10.1016/j.conbuildmat.2019.07.173 ↗
9. Effect of liquid ASAs on the rheological properties of crumb rubber modified bitumen10.1016/j.conbuildmat.2018.11.028 ↗
10. Energy consumption and environmental impact of rubberized bitumen pavement10.1016/j.jclepro.2018.01.086 ↗
11. Waste tire recycling assessment: road application potential and carbon emissions reduction analysis of crumb rubber modified bitumen in China10.1016/j.jclepro.2019.119411 ↗
12. Odour impact assessment in industrial areas
13. Improvement of thermal and optical responses of short-term aged thermochromic asphalt binder by warm-mix asphalt technology10.1016/j.jclepro.2020.123675 ↗
14. Reduction of offensive odor from natural rubber using Zinc-modified bentonite
15. Quantification of VOCs and the development of odour wheels for rubber processing10.1016/j.scitotenv.2018.11.451 ↗
16. Reduction of offensive odor from natural rubber by odor-reducing substances10.1002/app.20188 ↗
17. Identification of bacteria caused bad odors in the rubber plants10.1088/1757-899X/526/1/012044 ↗
18. Properties of vapor detector arrays formed through plasticization of carbon black−organic polymer composites10.1021/ac011054+ ↗
19. Enhanced sensitivity to and classification of volatile carboxylic acids using arrays of linear poly (ethylenimine)− carbon black composite vapor detectors10.1021/ac020412l ↗
20. Reaction pathways for surface activated rubber particles10.1016/j.resconrec.2019.05.041 ↗
21. High temperature rheological characteristics of plasma-treated crumb rubber modified binders10.1016/j.conbuildmat.2019.117614 ↗
22. Effects of furfural activated crumb rubber on the properties of rubberized bitumen10.1016/j.conbuildmat.2011.08.041 ↗
23. Experimental study on the microwave processing of waste tyre rubber aggregates to enhance their surface properties for their use in rubberized bituminous mixtures10.1002/mop.30868 ↗
24. Ultra-violet and chemical treatment of crumb rubber aggregate in a sustainable concrete mix
25. Improving the rheological properties of crumb rubber modified binder using hydrogen peroxide10.1080/14680629.2013.812535 ↗
26. Selective adsorption of bio-oils' molecules onto rubber surface and its effects on stability of rubberized asphalt10.1016/j.jclepro.2019.119856 ↗
27. Physical and chemical properties of plasma treated crumb rubbers and high temperature characteristics of their rubberised bitumen binders10.1080/14680629.2018.1507922 ↗
28. Surface modified ground rubber tire by grafting acrylic acid for paving applications10.1016/j.conbuildmat.2012.02.040 ↗
29. Effect of microwave-activated crumb rubber on reaction mechanism, rheological properties, thermal stability, and released volatiles of bitumen binder10.1016/j.jclepro.2019.119230 ↗
30. A study on the performance and storage stability of crumb rubber-modified asphalts10.1080/10916460903070421 ↗
31. Rheological performance investigation and sustainability evaluation of asphalt binder with thermochromic powders under solar radiation10.1016/j.solmat.2018.11.017 ↗
32. Effect of rubber characteristics on asphalt binder properties10.1080/14680629.2013.812845 ↗
33. The effect of tyre rubber grinding method on the rubber-asphalt binder properties10.1016/j.conbuildmat.2017.07.170 ↗
34. Evaluation methods and indexes of morphological characteristics of coarse aggregates for road materials: a comprehensive review10.1016/j.jtte.2019.01.003 ↗
35. Static creep of modified superpave asphalt concrete mixtures using crumb tire rubber, microcrystalline synthetic wax, and nano-silica
36. SEM and ESEM techniques used for analysis of bitumen binder and mixture: a state of the art review10.1016/j.conbuildmat.2018.07.126 ↗
37. Evaluation of aging behaviors of bitumen binders through different rheological indices10.1016/j.fuel.2018.02.087 ↗
38. Effect of crumb tire rubber, microcrystalline synthetic wax, and nano silica on asphalt rheology10.1080/14680629.2018.1527718 ↗
39. High temperature rheological properties of crumb rubber modified bitumen binders with various modifiers10.1016/j.conbuildmat.2016.02.069 ↗
40. High temperature rheological characteristics of activated crumb rubber modified asphalts10.1016/j.conbuildmat.2018.10.223 ↗
41. The influence of nanoclay on the performance properties and moisture susceptibility of rubberized bitumen mixture10.1080/10916466.2016.1248775 ↗
42. Internal influence factors of bitumen-aggregate filler interactions based on rheological characteristics10.1061/(ASCE)MT.1943-5533.0000506 ↗