Modification mechanism of C9 petroleum resin and its influence on SBS modified asphalt
Source abstract
Abstract
Abstract In this paper, C9 petroleum resin was used as the raw material, and the microstructure of C9/SBS modified asphalt at a different time under different C9 petroleum resin content was studied by fluorescence microscope. The mechanical properties were studied by using the whole section fracture energy, the pavement performance of C9/SBS modified asphalt was tested and analyzed. The results show that C9 petroleum resin is conducive to SBS particles being sheared into smaller particles under the same preparation process. The larger the content of C9 petroleum resin, the smaller the final size of SBS particles, and the smallest SBS particle size can be reduced by about half. When the content of C9 petroleum resin is more than 9%, the decreasing trend is no longer obvious. This phenomenon mainly occurs in the final stage of shearing. C9 petroleum resin can affect the swelling behaviour of SBS in asphalt and its final microstructure by reducing the particle size of SBS. The larger the content of C9 petroleum resin, the larger the area occupied by SBS after swelling, and the longer the skeleton length of SBS, the easier the crosslinking occurs and the denser the crosslinking network structure is formed. The addition of C9 petroleum resin can effectively improve the fracture energy density of SBS modified asphalt, and its mechanism is closely related to the effect of C9 petroleum resin on the shear particle size and final swelling degree of SBS particles. C9 petroleum resin can effectively hinder the floating and aggregation of SBS modifier in asphalt during high-temperature storage, thus improving the storage stability of SBS modified asphalt. The incorporation of C9 petroleum resin can significantly increase the viscosity of SBS modified asphalt, improve the low-temperature performance of SBS modified asphalt, and improve the anti-ageing performance of SBS modified asphalt. The results provide a new way to improve the performances of SBS modified asphalt.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Application of the discrete element method and CT scanning to investigate the compaction characteristics of the soil–rock mixture in the subgrade
2. R. Hossain, N.M., Wasiuddin. Evaluation of degradation of SBS modified asphalt binder because of RTFO, PAV, and UV aging using a novel extensional deformation test, Transportation Research Record, 2673 (6) (2019) 447-457. 10.1177/0361198119847471.10.1177/0361198119847471 ↗
3. Phase field simulation and microscopic observation of phase separation and thermal stability of polymer modified asphalt10.1016/j.conbuildmat.2019.01.180 ↗
4. Rheological properties of asphalt binders modified with recycled materials: A comparison with Styrene-Butadiene-Styrene (SBS)10.1016/j.conbuildmat.2019.117047 ↗
5. The effect of direct-to-plant styrene-butadiene-styrene block copolymer components on bitumen modification10.3390/polym11010140 ↗
6. Effect and prediction of aromatic oil on swelling degree of direct-to-plant SBS modifier in bitumen10.1080/10916466.2019.1570255 ↗
7. Physical and rheological properties of crumb rubber/styrene–butadiene–styrene compound modified asphalts10.1002/pc.23762 ↗
8. Evaluation of the terminal blend crumb rubber/SBS composite modified asphalt10.1016/j.conbuildmat.2021.122377 ↗
9. Laboratory evaluation of the effect of composite modifier on the performance of asphalt concrete mixture10.1016/j.conbuildmat.2017.08.038 ↗
10. Studies on the secondary modification of SBS modified asphalt by the application of octadecyl amine grafted graphene nanoplatelets as modifier10.1016/j.diamond.2018.08.011 ↗
11. Changes in fractional compositions of PPA and SBS modified asphalt binders10.1016/j.conbuildmat.2017.07.021 ↗
12. High and low temperature performance and fatigue properties of silica fume/SBS compound modified ssphalt10.3390/ma13194446 ↗
13. Compound modification of asphalt with styrene-butadiene-styrene and waste polyethylene terephthalate functionalized additives10.1016/j.jclepro.2020.124286 ↗
14. Rheological and adhesion properties of nano-organic palygorskite and linear SBS on the composite modified asphalt10.1016/j.powtec.2020.08.080 ↗
15. Influence of multi-dimensional nanomaterials composite form on thermal and ultraviolet oxidation aging resistances of SBS modified asphalt10.1016/j.conbuildmat.2020.122054 ↗
16. Investigation of rejuvenation and modification of aged asphalt binders by using aromatic oil-SBS polymer blend10.1016/j.conbuildmat.2019.117154 ↗
17. Z. Li, X. Nie, H. Yao, X. Zhou, C. Li, Study on Properties of C9 Petroleum Resin/SBS Composite Modified Asphalt, Journal of Building Materials, 22 (5) (2019) 764-770 [in Chinese]. 10.3969/j.issn.1007-9629.2019.05.014.
18. Facile preparation and application performance evaluation of SBS/C9 petroleum resin blends as modifier for high viscosity asphalt10.1016/j.conbuildmat.2020.120073 ↗
19. Y. Cong, L. Xu, W. Huang, C. Zhang, Z. Liu, Study on modification of asphalt by SBS-C9 petroleum resin, Journal of Building Materials, 19 (3) (2016) 602-605 [in Chinese]. 10.3969/j.issn.1007-9629.2016.03.032.
20. Effect of C9 petroleum resins on improvement in compatibility and properties of SBS-modified asphalt10.1080/10916466.2019.1602642 ↗
21. RIOH. Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering (JTG E20-2011), Beijing: China Communications Press, 2011 [in Chinese].
22. ASTM International, ASTM E28-18, Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus, ASTM International, West Conshohocken, PA, 2018. 10.1520/E0028-18.
23. ASTM International, ASTM D1544-04(2018), Standard Test Method for Color of Transparent Liquids (Gardner Color Scale), ASTM International, West Conshohocken, PA, 2018. 10.1520/D1544-04R18.
24. ASTM International, ASTM D974-14e2, Standard Test Method for Acid and Base Number by Color-Indicator Titration, ASTM International, West Conshohocken, PA, 2014. 10.1520/D0974-14E02.
25. Development of a binder fracture test to determine fracture energy properties10.1080/14680629.2014.927412 ↗
26. Experimental and numerical investigation of fracture mechanics of bitumen beams10.1016/j.engfracmech.2012.10.010 ↗
27. ASTM International, ASTM D6723-12, Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT), ASTM International, West Conshohocken, PA, 2012. 10.1520/D6723-12.
28. The development of a novel test method to assess the durability of asphalt road–pavement materials10.1016/j.ijadhadh.2012.10.013 ↗
29. Evaluation of cracking resistance potential of geosynthetic reinforced asphalt overlays using direct tensile strength test10.1016/j.conbuildmat.2017.11.158 ↗
30. RIOH. Technical Specification for Construction of Highway Asphalt Pavements (JTG F40-2004). Beijing: China Communications Press, 2004 [in Chinese].