journal article·2022-01

Solidification/stabilization of red mud with natural radionuclides in granular blast furnace slag based geopolymers

Zhongtao Luo, Yuhua Hao, Yuandong Mu, Changbo Tang, Xiaohai Liu

Publisher page

Abstract

Abstract Red mud is a NORM residue of aluminum industry, and its large storage endangers environmental safety. In this study, red mud was used to prepare geopolymers to dilute its radioactivity. The activity concentrations of 226Ra, 232Th and 40K of geopolymers with different contents of red mud (0, 30, 50, 70 wt%) were investigated, and the activity concentration index, annual effective dose and shielding rate were calculated to evaluate the radiological safety and solidification effect of geopolymers. The solidification/stabilization mechanism of geopolymers was discussed by using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The results showed that the hydration process of geopolymers had a solidification effect on the radionuclides contained in red mud. When the red mud content was 30 wt%, the radioactivity was within the safety threshold as a building material, and the compressive strength of the geopolymers reached 72.19 MPa. The maximum red mud content in geopolymers was 40.81 wt% by fitting. The adsorption effect and the encapsulation effect of C-S-H gel could promote the solidification/stabilization of radionuclides of red mud in geopolymers. This research provides a perspective for the radiological safety of the red mud based geopolymers in construction materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bauxite Residue and Utilization · Graphite, nuclear technology, radiation studies · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Synthesis and properties of inorganic polymers (geopolymers) derived from Bayer process residue (red mud) and bauxite10.1007/s10853-015-9338-9 ↗
2. Radiological aspects of the usability of red mud as building material additive10.1016/j.jhazmat.2007.05.004 ↗
3. The history, challenges, and new developments in the management and use of bauxite residue10.1007/s40831-016-0060-x ↗
4. Red mud addition in the raw meal for the production of Portland cement clinker10.1016/j.jhazmat.2004.08.002 ↗
5. Hydration of Portland cement with red mud as mineral addition10.1007/s10973-017-6794-2 ↗
6. Preparation and mechanism of the sintered bricks produced from Yellow River silt and red mud10.1016/j.jhazmat.2011.11.095 ↗
7. Self-compacting architectural concrete production using red mud10.1016/j.conbuildmat.2019.07.248 ↗
8. Measurement of natural radioactivity in building materials used in Urumqi, China10.1093/rpd/nct002 ↗
9. Radiological characterisation of alkali-activated construction materials containing red mud, fly ash and ground granulated blast-furnace slag10.1016/j.scitotenv.2019.01.006 ↗
10. Assessment of the natural radioactivity using two techniques for the measurement of radionuclide concentration in building materials used in Japan10.1007/s10967-009-0050-6 ↗
11. Natural radioactivity in common building construction and radiation shielding materials10.1016/j.atmosenv.2007.11.037 ↗
12. Concrete and cement composites used for radioactive waste deposition10.1016/j.jenvrad.2017.08.012 ↗
13. Binding mechanisms of radionuclides to cement10.1016/j.cemconres.2007.11.004 ↗
14. Composition and technological properties of geopolymers based on metakaolin and red mud10.1016/j.matdes.2013.05.058 ↗
15. Radiological and material characterization of high volume fly ash concrete10.1016/j.jenvrad.2016.06.021 ↗
16. Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates10.1016/j.conbuildmat.2019.07.211 ↗
17. Durability evaluation of geopolymer and conventional concretes10.1016/j.conbuildmat.2017.01.056 ↗
18. Recycling waste materials in geopolymer concrete10.1007/s10098-018-01660-2 ↗
19. New perspectives and issues arising from the introduction of (NORM) residues in building materials: a critical assessment on the radiological behaviour10.1016/j.conbuildmat.2015.01.069 ↗
20. C.O. Union, Council Directive 2013/59/Euratom, (2013).
21. European · 1999
22. Col, Hockings, Unscear 2000 – Sources and Effects of Ionising Radiation - Volume 1: Sources, Non-Destructive Testing Australia (2001).
23. Radiological characterization and evaluation of high volume bauxite residue alkali activated concretes10.1016/j.jenvrad.2016.08.013 ↗
24. Alkali-activated concrete with Serbian fly ash and its radiological impact10.1016/j.jenvrad.2016.09.002 ↗
25. Radiological characterization of anhydrous/hydrated cements and geopolymers10.1016/j.conbuildmat.2015.10.074 ↗
26. Immobilization of chromite ore processing residue with alkali-activated blast furnace slag-based geopolymer10.1016/j.ceramint.2016.03.033 ↗
27. Spectroscopic studies of alkaline activated slag geopolymers10.1016/j.molstruc.2008.12.026 ↗
28. High calcium fly ash geopolymer stabilized lateritic soil and granulated blast furnace slag blends as a pavement base material10.1016/j.jhazmat.2017.07.067 ↗
29. Application of portland cement-based materials to radioactive waste immobilization10.1016/0956-053X(92)90044-J ↗
30. Effect of self-glazing on reducing the radioactivity levels of red mud based ceramic materials10.1016/j.jhazmat.2011.10.039 ↗
31. Radioactivity and Pb and Ni immobilization in SCM-bearing alkali-activated matrices10.1016/j.conbuildmat.2017.11.119 ↗
32. Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes10.1016/j.jhazmat.2008.12.121 ↗
33. Application of inorganic cements to the conditioning and immobilisation of radioactive wastes10.1533/9780857090959.1.67 ↗
34. Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix10.1016/j.jclepro.2017.01.147 ↗
35. Coal fly ash as raw material for the manufacture of geopolymer-based products10.1016/j.wasman.2007.02.001 ↗
36. Recycling and utilization assessment of waste fired clay bricks (Grog) with granulated blast-furnace slag for geopolymer production10.1016/j.psep.2016.08.001 ↗
37. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
38. Mechanical performances and microstructures of metakaolin contained UHPC matrix under steam curing conditions
39. Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material
40. Influence of sisal fibers on the mechanical performance of ultra-high performance concretes
41. Low carbon cementitious materials: Sodium sulfate activated ultra-fine slag/fly ash blends at ambient temperature
42. Utilization of barium slag to improve chloride-binding ability of cement-based material
43. Incorporation of self-ignited coal gangue in steam cured precast concrete