journal article·2015-09

Effects of strain rate on mechanical behavior of modeled recycled aggregate concrete under uniaxial compression

Jianzhuang Xiao, Long Li, Luming Shen, Junqiang Yuan

Publisher page

Abstract

Abstract This paper reports the experimental study of strain-rate effects on the mechanical behavior of modeled recycled aggregate concrete (MRAC) under uniaxial compressive loading with strain rates ranging from 10 −5 /s to 10 −1 /s. The failure pattern, peak stress, peak strain and elastic modulus of MRAC are analyzed to assess the strain-rate sensitivity. Different types of MRAC specimens are tested to investigate the effects of quasi-static strength and modeled recycled coarse aggregate (MRCA) replacement ratio on the strain-rate sensitivity of MRAC. With the increase of strain rate, the peak stress and elastic modulus increase while the peak strain shows no clear trend. The effects of strain rate on low strength MRAC are more significant than that of high strength MRAC. As the strain rate increases, cracks grew more rapidly and there were always several main cracks running through the MRAC specimens at a high strain rate, resulting in fewer cracks than under quasi-static loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. An experimental study on the effect of recycled aggregate on concrete properties10.1680/macr.2002.54.1.7 ↗
2. Properties of concretes produced with waste concrete aggregate10.1016/j.cemconres.2003.12.019 ↗
3. Mechanical properties of recycled aggregate concrete under uniaxial loading10.1016/j.cemconres.2004.09.020 ↗
4. Properties of concrete prepared with low-grade recycled aggregates10.1016/j.conbuildmat.2012.06.060 ↗
5. Abrams DA. Effect of rate of application of load on the compressive strength of concrete. In: Proc. ASTM, American Society of Testing Materials 1917; 17: p. 364–5.
6. Strain-rate sensitive behavior of cement paste and mortar in compression
7. Effects of strain-rate on concrete strength
8. Influence of strain rates and loading histories on the compressive damage behaviour of concrete10.1680/macr.10.00119 ↗
9. Malvern LE, Ross CA. Dynamic response of concrete and concrete structures. Second Annual Technical Report, AFOSR Contract No. F49620–83-K007, University of Florida; 1985.10.21236/ADA139294 ↗
10. Behavior of hoop confined concrete under high strain rates
11. Effect of loading rate on the tensile behaviour of concrete: description of the physical mechanisms10.1007/BF02486201 ↗
12. Effect of straining rate on the compressive strength and elastic properties of concrete
13. Study of the relationships between time, strength, deformation and fracture of plain concrete10.1680/macr.1972.24.81.197 ↗
14. The effect of testing speed on strength and elastic properties of concrete
15. Compressive behavior of concrete at high strain rates10.1007/BF02472016 ↗
16. Review of strain rate effects for concrete in tension
17. Experimental study on dynamic tensile strength of cement mortar using split Hopkinson pressure bar technique10.1061/(ASCE)MT.1943-5533.0000926 ↗
18. Quantification of dynamic tensile behavior of cement-based materials10.1016/j.conbuildmat.2013.10.039 ↗
19. The effect of rate of loading upon the static and fatigue strengths of plain concrete in compression10.1680/macr.1973.25.83.73 ↗
20. Meso-level numerical simulation on mechanical properties of modeled recycled concrete under uniaxial compression
21. Crack propagation in recycled aggregate concrete under uniaxial compressive loading
22. Simulation study on the stress distribution in modeled recycled aggregate concrete under uniaxial compression10.1061/(ASCE)MT.1943-5533.0000598 ↗
23. Failure processes of modeled recycled aggregate concrete under uniaxial compression10.1016/j.cemconcomp.2012.06.017 ↗
24. Strain-softening of concrete in uniaxial compression10.1007/BF02486177 ↗
25. Effect of strain rate on the compressive strength surface cracking and failure mode of mortar
26. Zeng SJ. Dynamic Experimental Research and Stochastic Damage Constitutive Model for Concrete [D]. Shanghai: Tongji University; 2012. p. 44–5. (in Chinese).
27. Yuan JQ. Dynamic Mechanical Behaviours of model recycled concrete under Uniaxial Compression[D]. Shanghai: Tongji University; 2013. p. 24–8. (in Chinese).
28. Comité Eurointernational du Béton. CEB-FIP Model Code 1990. Thomas Thelford, London 1993: p. 48–51.