Cement–clay grouts modified with acrylic resin or methyl methacrylate ester: Physical and mechanical properties
Source abstract
Abstract
Abstract Grouting is a common technical method with many applications, e.g. it is used for soil stabilization and strengthening, for reduction of water ingress to underground facilities or of the water loss through a dam foundation, etc. Grouts comprise several constituents, which are combined in many ways depending on the in situ conditions and the outcome desired. Superplasticizers, accelerators, antifreezers, air-entraining agents and many others are generally used to improve the quality of cement grouts and consequently, their effectiveness on strength (especially bond strength), durability, impermeability and resistance to chemical erosion of the grouted soil or rock mass. A comprehensive laboratory work was carried out in order to study the physical and mechanical properties of grouts prepared by using cement, clay, water in different percentages along with an amount of acrylic resin or methyl methacrylate co-polymer emulsion. Flowability, setting time, bleeding, compressive strength, elastic modulus, shear bond strength, resistance to wet–dry cycles and resistance to sulfate attack of the grouts were determined. The results of this study indicated that the addition of latexes improves significantly the compressive strength, shear bond strength, stability, resistance to wet–dry cycles and resistance to sulfate attack, especially for thick pure cement grouts. This improvement depends on the type of latex.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Microbial Applications in Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Polymer-modified mortars and concretes
2. Influence of acid on crack growth on a brick-improved mortar interface
3. Strength and elastic properties of powdered and aqueous polymer-modified mortars10.1016/0008-8846(94)90105-8 ↗
4. Polymer–cement mortars for repairing ancient masonries: mechanical properties10.1016/S0950-0618(02)00040-5 ↗
5. Ohama Y. Improvement in properties of vinyl-acetate-type-polymer-modified mortars. In: Proceedings of the 13th Japan congress on materials research. SMSJ, Kyoto, Japan. 1970;212–5.
6. Yeon KS, Han MY. Fundamental properties of polymer–cement mortars for concrete repair. In: Forde MC, editor. Proceedings of the seventh international conference on structural faults and repair. Edinburg 1997;2:469–76.
7. Demura K, Ohama Y, Kim WK. Development of polymer-modified preplaced aggregate concrete for repair works of reinforced concrete structures. In: Forde MC, editor, Proceedings of the seventh international conference on structural faults and repair. Edinburg 1997;2:101–108.
8. Compressive strength of polymer-modified hydraulic cements
9. Mechanical characterization of a styrene–butadiene modified mortar10.1016/S0921-5093(00)01980-8 ↗
10. Basic rheological and mechanical properties of high-volume fly ash grouts10.1016/S0950-0618(02)00026-0 ↗
11. Properties of cement–fly ash admixed with bentonite, silica fume, or organic fiber10.1016/S0008-8846(97)00032-X ↗
12. Anagnostopoulos CA, Kiparissides C, Anagnostopoulos AC. Physical and mechanical properties of mortars modified with homo or co-polymer of methyl methacrylate. In: Forde MC, editor. Proceedings of the 10th international conference on structural faults and repair. London, UK; 2003.