Performance evaluation of a lightweight epoxy asphalt mixture for bascule bridge pavements
Source abstract
Abstract
Abstract This paper proposes a lightweight epoxy asphalt mixture (LEAM) for pavement on bascule bridges. The material properties of LEAM are evaluated with the Marshall test, indirect tensile test, wheel tracking test, and bending beam test. Moreover, the structural performance of LEAM is evaluated by a finite element numerical analysis for a bascule bridge with LEAM pavement. Test results show that the LEAM has a good resistance to moisture damage, permanent deformation, and low-temperature cracking. The LEAM with a 70% lightweight aggregate replacement percentage has been found to have the best effect on deadweight reduction as well as the other performance measures. Moreover, the analytical result shows that LEAM can reduce pavement stress significantly when compared to an epoxy asphalt mixture, which indicates that the LEAM has a good structural performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Zhang L. Qian ZD and Liu Y. Special considerations and analysis for the pavement of the bascule bridge. In: Proceedings of selected papers from the 2009 GeoHunan international conference; 2009.10.1061/41048(355)4 ↗
2. Performance evaluation of a high durability asphalt binder and a high durability asphalt mixture for bridge deck pavements10.1016/j.conbuildmat.2008.01.001 ↗
3. Epoxy asphalt concrete paving on the deck of long-span steel bridges10.1360/02ww0123 ↗
4. Suitability of lightweight aggregate for bituminous plant mix
5. Lehmann HL, Adam V. Use of expanded clay aggregate in bituminous construction. In: Highway research board proceedings. vol. 38, 1959. p. 398–407.
6. Bob · 1998
7. Improvement of bitumen performance with epoxy resin10.1016/j.fuel.2008.12.024 ↗
8. Gaul. R. A long life pavement for orthotropic bridge decks in China. In: Proceedings of selected papers from the 2009 GeoHunan international conference; 2009.10.1061/41048(355)1 ↗
9. Losa M, Leandri P, Bacci R. Mechanical and performance-related properties of asphalt mixes containing expanded clay aggregate. In: TRB Annual Meeting CD-ROM; 2008.10.3141/2051-04 ↗
10. Performance evaluation of porous asphalt with granulated synthetic lightweight aggregate10.1016/j.conbuildmat.2006.12.008 ↗
11. ASTM D 4867: Standard test for effect of moisture on asphalt concrete paving mixtures; 1999.
12. High temperature properties of wax modified binders and asphalt mixtures10.1016/j.conbuildmat.2009.06.010 ↗
13. Huang · 2006
14. Experimental and numerical analysis of a waterproofing adhesive layer used on concrete-bridge decks10.1016/j.ijadhadh.2008.12.001 ↗
15. NCHRP. Simple performance test for superpave mix design (Project 9-19 FY’98), NCHRP report 465. Washington, DC: Transportation Research Board; 2002.
16. NCHRP. Simple performance test for superpave mix design: first-article development and evaluation (Project D09-29 FY’01), NCHRP report 513. Washington, DC: Transportation Research Board; 2003.
17. NCHRP. Standard test method for dynamic modulus of asphalt concrete mixtures. NCHRP 1-37A provisional test method DM-1. Arizona: Arizona State University; 2002.
18. Williams ML, Landel RF, Ferry JD. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. JACS; 1955.10.1021/ja01619a008 ↗
19. Witczak · 2004
20. Chowdhury · 1998