Effect of pre-heating duration and temperature conditioning on the rheological properties of bitumen
Source abstract
Abstract
Abstract It is well known that overheating asphalt bitumen can lead to oxidation and stiffening. While heating bitumen is an essential protocol in sample preparation, it is important to identify the oven setting time and temperature for lab testing. Current AASHTO standards do not specify exact oven settings for bitumen sample preparation prior to laboratory testing. This study is evaluating the effect of oven heating duration and pouring temperature during sample preparation in the rheological properties of neat and polymer-modified bitumen (PMB). Rheological properties are measured using Rotational Viscometer, Dynamic Shear Rheometer and Bending Beam Rheometer at grade-specific testing temperatures. A neat bitumen PG64-22 and two PMB PG70-22 and 76-22 in un-aged (original) and aged conditions were tested at two temperatures: 143 °C and 185 °C for 1/2, 2 and 4 h. The effect of short-term aging by rolling thin film oven was also investigated. To investigate the rheological properties over a wide range of temperatures, temperature sweep testing was conducted from 35 °C to 110 °C at a 10 rad/s frequency. The results suggest that there was no significant difference in the viscosity, complex modulus and creep stiffness for the tested bitumen. The RTFO aging index, absolute drop of complex viscosity and temperature aging indices were used to evaluate the bitumen preparation settings. The study recommends using the 143 °C and 2-h heating for proper preparation prior to standard lab testing. The study also investigated the aging influence in rheological properties for neat and PMB using the black diagram, DSR function map, and critical-stiffness temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. AASHTO. Standard specifications for transportation materials and methods of sampling and testing. 30th ed. Washington, DC; 2010.
2. The influence of laboratory aging methods on the rheological properties of asphalt bitumens10.1520/JTE12304J ↗
3. Asphalt modified by SBS triblock copolymer: structures and properties10.1002/pen.10567 ↗
4. Airey · 1988 · vol. 67
5. Rheological properties of styrene butadiene styrene polymer modified road bitumens10.1016/S0016-2361(03)00146-7 ↗
6. Al-Azri NA, Jung SH, Lusford KM, Ferry A, Bullin JA, Davison RR, et al. Bitumen oxidative aging. Transportation research record, 1962; 2006. p. 12–20.10.1177/0361198106196200102 ↗
7. Cavaliere MG, Diani E, Dia MD. Dynamic mechanical characterization of bitumen and asphalt concrete. In: Proceedings of the euroasphalt and eurobitume congress; 1996. p. 5551.
8. The influence of UV aging of a styrene/butadiene/styrene modified bitumen: comparison between laboratory and on site aging10.1016/j.fuel.2006.11.024 ↗
9. Elseifi M. Viscoelastic modeling of straight and modified bitumens at intermediate and high temperatures. Master’s thesis, Virginia Tech, Blacksburg, VA; 1999.
10. Ferry JD. Viscoelastic properties of polymers. 3rd ed. New York: John Wiley; 1980.
11. Gahvari F. Modeling of the linear viscoelastic response of polymer modified asphalt bitumen at intermediate and high temperatures. PhD thesis, Virginia Tech, Blacksburg, VA; 1996.
12. Influence of styrene–butadiene–styrene polymer modification on bitumen viscosity10.1016/S0016-2361(97)00144-0 ↗
13. Lu X, Isacsson U. Chemical and rheological characteristics of styrene–butadiene–styrene polymer-modified bitumens. Transportation research record, 1661; 1999. p. 83–92.10.3141/1661-13 ↗
14. McCrum NG, Buckley CP, Bucknall CB. Principles of polymer engineering. 2nd ed. New York: Oxford Science Publications; 1997.
15. Improving the aging resistance of styrene–butadiene–styrene tri-block copolymer modified asphalt by addition of antioxidants10.1016/j.polymdegradstab.2005.06.009 ↗
16. Influence of the processing conditions on the rheological behaviour of polymer-modified bitumen10.1016/S0016-2361(03)00065-6 ↗
17. Temporary networks in polymer-modified asphalts10.1002/pen.20246 ↗
18. An investigation of asphalt durability: relationships between ductility and rheological properties for unmodified asphalts10.1081/LFT-120016946 ↗
19. Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen10.1016/j.conbuildmat.2008.05.004 ↗
20. Sperling LH. Introduction to physical polymer science. 2nd ed. New York: John Wiley and Sons, Inc.; 1992.
21. Rutting resistance of asphalt mixes containing non-conventional and polymer-modified bitumens
22. Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen10.1016/j.conbuildmat.2008.05.004 ↗