journal article·2014-09

A microstructural approach to adherence mechanism of cement and asphalt mortar (CA mortar) to repair materials

Yunpeng Liu, Fazhou Wang, Muyu Liu, Shuguang Hu

Publisher page

Abstract

Abstract Cement and asphalt mortar (CA mortar) is the key component for high-speed railway with high asphalt content to obtain low modulus which makes it difficult to bond with repair materials. The purpose of this work was to investigate the bonding mechanism of CA mortar to two type repair materials – SAC-AE composite mortar (short for SACR) and resin mortar (short for RM) based on microstructural evaluation of substrate CAM/repair materials by scanning electron microscopy (SEM) with EDS spectra. Results indicate that the porous structure of CA mortar had provided the space for mechanical interlocking with SAC-AE composite mortar which led to a nice bonding. However, CA mortar was bonded with resin mortar by van der Waals force which led to a weak bonding. The mode of rupture was mix-mode interfacial-cohesive failure and mostly interfacial failure for SACR-CAM and RM-CAM, respectively. The effect of asphalt content and curing age on the bonding strength between substrate CAM and repair materials was also studied which could be well explained by bonding mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Corrosion Behavior and Inhibition · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Recent developments in slab track
2. Research on CA mortar in slab track
3. A novel method to evaluate the setting process of cement and asphalt emulsion in CA mortar10.1617/s11527-007-9270-9 ↗
4. Study on the rheological properties of fresh cement asphalt paste10.1016/j.conbuildmat.2011.07.010 ↗
5. Effect of temperature and pressure on the degradation of cement asphalt mortar exposed to water10.1016/j.conbuildmat.2012.03.002 ↗
6. Temperature measurement and temperature stress analysis of ballastless track slab
7. Effect of cement asphalt mortar disease on dynamic performance of slab track
8. Zhen · 2009
9. A new way to increase the long-term bond strength of new-to-old concrete by the use of fly ash10.1016/S0008-8846(02)01064-5 ↗
10. A way for improving interfacial transition zone between concrete substrate and repair materials10.1016/S0008-8846(02)00840-2 ↗
11. Influence of silane coupling agent on quality of interfacial transition zone between concrete substrate and repair materials10.1016/j.cemconcomp.2005.09.004 ↗
12. A microstructural approach to adherence mechanism of poly(vinyl alcohol) modified cement systems to ceramic tiles10.1016/j.cemconres.2006.11.011 ↗
13. Study on the rheological properties of fresh cement asphalt paste10.1016/j.conbuildmat.2011.07.010 ↗
14. Effect of early cement hydration on the chemical stability of asphalt emulsion10.1016/j.conbuildmat.2013.01.009 ↗
15. Early age volume change of cement asphalt mortar in the presence of aluminum powder10.1617/s11527-009-9505-z ↗
16. Influence of loading rate on mechanical properties of CAMs
17. Significance of property mismatch in the patch repair of structural concrete, Part I: Properties of repair systems10.1680/macr.1990.42.152.147 ↗
18. Analysis of compatibility between repair material and substrate concrete using simple beam with third point loading10.1061/(ASCE)0899-1561(2007)19:12(1060) ↗
19. Repair techniques for broken cement asphalt mortar on ballastless track
20. Research on rapid repairing split between track slab and mortar layer for slab-type ballastless track
21. Durability of epoxy resin-based materials for the repair of damaged cementitious composites10.1016/S0008-8846(98)00176-8 ↗
22. Testing the bond between repair materials and concrete substrate