journal article·2013-10

Effectiveness of Impact Echo testing in detecting flaws in prestressed concrete slabs

Muhammad Tariq A. Chaudhary

Publisher page

Abstract

Abstract This paper presents application of Impact Echo (IE) technique for evaluation of unsound concrete in the anchorage zones of a post-tensioned (PT) slab in a high rise building. The L-shaped area where the problem occurred was located at the interface of prestressed concrete beams and a depressed floor slab. Single point IE evaluation was used as the Non-Destructive Testing (NDT) evaluation method due to its portability and recent success in similar applications. Repair scheme for the affected portions was devised based on the results of IE investigations. Majority (84%) of the tested locations were classified as Good or Fair and required no further investigation/repair. The remaining 16% of the locations that were identified as Questionable or Poor by IE testing were manually investigated by field chipping. These destructive field investigations revealed that the accuracy of fault prediction by single point IE method in the current application was around 60% for the points that were classified as Questionable/Poor. Adjustment to the commonly used geometric correction factor ( K ) in IE testing by ±5% improved this accuracy to 81%. This finding points to the need of adopting a revised geometric correction factor in IE testing of actual structural elements under field conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geophysical Methods and Applications · Structural Health Monitoring Techniques · Seismic Waves and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Malhotra · 2004
2. ACI 228.2R-98 (Reapproved 2004). Nondestructive Test Methods for Evaluation of Concrete in Structures, American Concrete Institute, Detroit, MI; 2004.
3. IAEA. Guidebook on non-destructive testing of concrete structures, Training course series No. 17, International Atomic Energy Agency, Vienna; 2002.
4. Sansalone · 1997
5. Carino NJ. The Impact-Echo method: An overview. In: Chang Peter C. (Editor). Proceedings of the 2001 structures congress and exposition, Washington DC, American Society of Civil Engineers; 2001.p.1–18.10.1061/40558(2001)15 ↗
6. Ten lectures on impact echo10.1007/s10921-008-0036-2 ↗
7. Lamb wave basis for impact echo method analysis10.1061/(ASCE)0733-9399(2005)131:4(438) ↗
8. Transient response of thick rectangular bars subjected to transverse elastic impact10.1121/1.402975 ↗
9. Impact-Echo: the complete story
10. Numerical time-domain modeling of linear and nonlinear ultrasonic wave propagation using finite integration techniques – theory and applications10.1016/j.ultras.2004.01.013 ↗
11. ASTM C 1383. Test method for measuring the P-wave speed and the thickness of concrete plates using the Impact-Echo method, ASTM Standards. vol. 04.02. ASTM: West Conshohocken, PA; 2004.
12. Damage assessment of concrete bridge decks using Impact-Echo method
13. Detecting voids in grouted tendon ducts of post-tensioned concrete structures using the Impact Echo Method
14. Krause M, Milmann B, Schickert M and Mayer K. Investigation of tendon ducts by means of ultrasonic echo methods: A comparative study. In Proceedings of the 9th European conf. on non-destructive testing, Berlin, CD-ROM; 2006.
15. Evaluation of grouting in tunnel lining using Impact-Echo10.1016/j.tust.2007.12.001 ↗
16. Evaluation of fire-damaged concrete using Impact-Echo method10.1617/s11527-009-9484-0 ↗
17. Training: often the missing link in using NDT methods10.1016/j.conbuildmat.2011.03.060 ↗
18. ACI 117-10. Standard Specifications for Tolerances for Concrete Construction and Materials, American Concrete Institution, Detroit, Michigan; 2010.
19. Sangoju B, Murthy SGN, Parthasarathy S, Wiggenhauser H, Ravisankar K, Iyer NR, Lakshmanan N. Reliability of the Impact-Echo method on thickness measurement of concrete elements. In: Proceedings of the 7th international symposium non-destructive testing in civil engineering, Nantes, France, CD-ROM; 2009.
20. Schubert F, Lausch R and Wiggenhauser H. Geometrical effects on Impact-Echo testing of finite concrete specimens, In: Proceedings of international symposium non-destructive testing in civil engineering (NDTCE), September 16–19, Berlin, Germany, Paper 039, CD-ROM; 2003.
21. Comparative performance tests and validation of NDT methods for concrete testing10.1007/s10921-008-0037-1 ↗
22. On the accuracy of thickness measurements in Impact-Echo testing of finite concrete specimens – numerical and experimental results10.1016/j.ultras.2004.01.076 ↗
23. Clausen JS, Kundsen A. Non destructive testing of cable ducts in concrete columns and walls using the Impact-Echo method. Workshop on advanced NDT technique for concrete structures. In: 10th ACI International conference on recent advances in concrete technology and sustainability issues, Seville, Spain; 2009.