journal article·2007-06

A method to determine water retainability of porous fine aggregate for design and quality control of fresh concrete

R. Kasemchaisiri, S. Tangtermsirikul

Publisher page

Abstract

Abstract Water retainability of a porous aggregate is defined, including absorption as well as adsorption. This moisture property is important for mix proportion and quality control of fresh concrete. An alternative test method to determine water retainability of porous fine aggregates is developed. By the conventional test method for obtaining absorption, it is not possible to reach the saturated surface dryness by collapsed-cone criterion due to the high inter-particle friction of the porous aggregate. The test method was designed, based on the concept of gravitational removal of excess water from the porous aggregate sample. Two procedures i.e. static and accelerated methods were studied to achieve the acceptable reliability within a reasonable time of testing. The comparison between test results of water absorption according to ASTM C 128 and those of water retainability by the proposed method indicated that this method had a better testing precision for all porous fine aggregates, as proved by the smaller standard deviations within the test results given by different individuals. Feasibility of the method was also validated by comparing the properties of conventional concrete (CVC) and self-compacting concrete (SCC) made of normal and porous fine aggregates. The water content of mixtures incorporating expanded clay and two types of bottom ash as river sand replacement of 0, 10, and 20% were adjusted, on the basis of the water absorption from the ASTM C 128 method and the water retainability from the proposed method. From the comparison, it was shown that the proposed test method was effectively applied as an alternative test for water retainability of porous fine aggregates in the quality control of fresh concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Lemmer C, Ruhl M, Nealen A. Correction of consistency of concrete made with aggregate derived from concrete rubble. Available from: www.b-i-t.de/public/tudmassiv/dacon13lemmerruehl.htm.
2. Investigation of lignite-based bottom ash for structural concrete10.1061/(ASCE)0899-1561(1996)8:3(128) ↗
3. Properties of high-calcium dry bottom ash
4. Unit weight, specific gravity, absorption, and surface moisture
5. Ozawa K, Tangtermsirikul S, Maekawa K. Role of powder materials on the filling capacity of fresh concrete. In: The 4th CANMET/ACI international conference on fly ash, silica fume, slag and natural pozzolans in concrete, Supplementary Papers. 1992. p. 121–30.
6. A slump model for predicting workability of fresh mortar and concrete
7. Vibration consistency prediction model for roller compacted concrete
8. Ozawa K, Maekawa K, Nanayakkara A. Solid stiffness model for analysis of fresh concrete flow, gravel, sand, and cement slurry mixture ASME. In: 4th symposium on solid–liquid flows. 1991. p. 39.
9. The determination of specific gravity using Siphon-Can method
10. A direct method of determining absorption and specific gravity of aggregates
11. Hughes BP, Famili H, Absorptions of concrete aggregates, Part 1 – Absorption of concrete aggregates, Part 2 – Saturated air techniques for determining the absorption of aggregates, RR/C8, Birmingham University, Great Britain, 1971.