journal article·2010-10

Evaluation of low-cycle fatigue damage in RC exterior beam-column subassemblages by acoustic emission

Amadeo Benavent, Enrique Castro, Antolino Gallego

Publisher page

Abstract

Since Acoustic Emission (AE) is effective in monitoring the initiation of cracks in materials and structures, it has been widely used as a real-time evaluation technique for damage in reinforced concrete (RC) elements such as beams or columns in moment-resisting frames. This paper investigates its applicability for assessing the low-cycle fatigue damage in RC exterior beam-column subassemblages, which are especially vulnerable parts of the RC frames when subjected to earthquakes. Two 3/5 scale specimens representing connections from the lower and upper part of a prototype building located in a moderate-seismicity area are tested under cyclic loading until collapse. Important differences between the two specimens are observed owing to the different size and amount of reinforcing steel. First, a significant increase in AE activity is observed when the steel reinforcement begins to undergo plastic deformations. Second, by means of the AE improved b-value method, it is clearly shown that the macroscopic fracture processes occur mainly during the loadings paths. Thus, on the basis of AE source location with four sensors situated around the beam-column joint, the AE is successfully correlated with the observed cracks. A strong correlation is also found between the accumulated plastic strain energy dissipated by the concrete and the accumulated AE energy. Based on this fact, a formula is proposed to predict the level of damage and the closeness to failure of an exterior beam-column subassemblage from the AE as recorded by sensors located near the joint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Response to Dynamic Loads · Rock Mechanics and Modeling · Seismic Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. The history and development of acoustic emission in concrete engineering10.1680/macr.1996.48.177.321 ↗
2. Quantitative damage estimation of concrete by acoustic emission10.1016/S0950-0618(00)00071-4 ↗
3. Quantitative evaluation and visualization of cracking process in reinforced concrete by a moment tensor analysis of acoustic emission
4. Acoustic emission evaluation of structural integrity in repaired reinforced concrete beams
5. Acoustic emission generated in corners of reinforced concrete rigid frame under cyclic loading
6. Yuyama S, Okamoto T, Shigeishi M, Ohtsu M, Kishi T. A proposed standard for evaluating structural integrity of reinforced concrete beams by acoustic emission. In: Vahaviolos SJ, editor. Acoustic emission: standards and technology update, ASTM STP 1353 American Society for Testing Materials, 1999, p. 25–40.10.1520/STP15778S ↗
7. Quantitative analysis of fracture process in RC column foundation by moment tensor analysis of acoustic emission10.1016/S0950-0618(99)00011-2 ↗
8. Evaluation of fatigue damage in reinforced concrete slab by acoustic emission10.1016/S0963-8695(01)00004-4 ↗
9. Acoustic emission evaluation of an arch dam during construction cooling and grouting10.1016/S0950-0618(97)00082-2 ↗
10. Structural damage diagnosis and life-time assessment by acoustic emission monitoring10.1016/j.engfracmech.2006.01.036 ↗
11. Evaluation of progressive failure using AE sources and improved b-value on slope model tests
12. Committee for the development of seismic codes. Norma Sismorresistente PDS-1 Parte A, Madrid: Spanish Ministry of Construction; 1974.
13. Concrete Committee. Instrucción para el proyecto y ejecución de obras de hormigón en masa o armado (EH-90), Madrid: Spanish Ministry of Construction; 1990.
14. Slow cyclic testing for evaluation of seismic performance of structural components10.63898/MZXN2007 ↗
15. Applied Technology Council. Guidelines for cyclic seismic testing of components of steel structures ATC-24. Applied Technology Council, Redwood City (CA); 1992.
16. Seismic behavior of RC wide beam-column connections under dynamic loading10.1080/13632460601064814 ↗
17. Strength decay in reinforced concrete members under load reversals10.1061/JSDEAG.0005402 ↗
18. Monpac system
19. Application of AE improved b-value to quantitative evaluation of fracture process in concrete materials
20. Akiyama · 1980
21. Mechanistic seismic damage model for reinforced concrete10.1061/(ASCE)0733-9445(1985)111:4(722) ↗
22. Scaling of energy dissipation in crushing and fragmentation: a fractal and statistical analysis based on particle size distribution10.1023/B:FRAC.0000045713.22994.f2 ↗
23. Fractal fragmentation theory for shape effects on quasi-brittle materials in compression10.1680/macr.2002.54.6.473 ↗
24. Pauley · 1992